15 free tools
Measure & build
Tape-measure math in feet, inches and fractions, board feet, stairs and slope, plus generator and wire sizing. Each one runs in your browser: nothing you type is uploaded.
All tools15
Feet and Inches Calculator
Add, subtract, multiply and divide lengths like 5' 7 3/8" with exact fractions, rounded to 1/16 inch, plus decimal feet, mm and cm and a tape view.
Open toolBoard Foot Calculator
Board feet for a whole cut list: pieces × thickness × width × length, 4/4 to 16/4 hardwood or nominal 2×4s, with waste and the cost at your price.
Open toolSlope Calculator
Slope from rise and run as percent, degrees and ratio (1:12). Convert 2% or 20% slope to degrees and find the drop over 10 ft. Feet, inches or metric.
Open toolStair Calculator
Find risers, treads, exact riser height, run, stair angle and stringer length from the total rise, with an IRC model-code check. Inches or metric.
Open toolVoltage Drop Calculator
Single-phase and 3-phase voltage drop for copper or aluminum wire: volts and percent lost, voltage at the load, and the smallest AWG size within 3% or 5%.
Open toolGenerator Size Calculator
Add up running watts and the largest starting surge for the appliances you want to power, and get a generator size with amps at 120 and 240 volts.
Open toolConduit Fill Calculator
Check how many wires fit in EMT, rigid, PVC or flexible conduit under NEC Chapter 9: fill percent, pass or fail, and the most of one wire size that fits.
Open toolTV Size and Viewing Distance Calculator
Find the TV size for your seating distance, or the best viewing distance for a TV size, using SMPTE and THX viewing angles, pixel limits and mount height.
Open toolWire Size Calculator
Find the smallest copper or aluminum wire size for a load: checks NEC ampacity, the 240.4(D) small-wire limits and voltage drop, and shows which governs.
Open toolOhm's Law Calculator
Enter any two of voltage, current, resistance and power to get the other two, with SI prefixes. Plus series/parallel, LED resistor and voltage divider.
Open toolResistor Color Code Calculator
Read 3, 4, 5 and 6 band resistor colors (IEC 60062) or turn a value into bands, check it against the E-series, and decode SMD codes including EIA-96.
Open toolBattery Life Calculator
Estimate how long a battery lasts from its capacity (mAh, Ah or Wh) and load, with a usable-capacity setting and duty cycle. Or find the capacity needed.
Open toolLED Resistor Calculator
Find the series resistor for an LED from supply, forward voltage and current: exact and E12/E24 value, color bands, power rating and efficiency.
Open toolElectrical Box Fill Calculator
Check electrical box fill under NEC 314.16: count conductors, grounds, clamps, devices and loops, compare with the box volume, and see pass or fail.
Open toolVoltage Divider Calculator
Resistor divider output voltage from Vin, R1 and R2, or the R1 and R2 for a target Vout, with E12/E24/E96 values, load effect, current and power.
Open tool