Resistor Color Code Calculator
Yellow, violet, red, gold on a 4-band resistor is 4.7 kΩ ±5% (4.465 kΩ to 4.935 kΩ): yellow and violet are the digits 4 and 7, red is the multiplier ×100 and gold is the tolerance ±5%. Pick 3, 4, 5 or 6 bands and a color for each, and the calculator shows the resistance, the lowest and highest value the tolerance allows and, on 6 bands, the temperature coefficient. It also works the other way: type a value such as 4.7k, choose a tolerance, and it draws the bands, with every band named in text, and tells you whether the value is a standard E-series value for that tolerance. A third part reads SMD codes such as 472, 4701, 01C (EIA-96) and 4R7. Colors follow IEC 60062.
Updated Runs in your browser: nothing you enter is uploadedHow this tool works
Decode color bands
4.7 kΩ ±5%
47 ×100 = 4,700 Ω, range 4.465 kΩ to 4.935 kΩ
4.7 kΩ is a standard E24 value, the series made for ±5% resistors.
- Band 1, yellow
- first digit: 4
- Band 2, violet
- second digit: 7
- Band 3, red
- multiplier: ×100
- Band 4, gold
- tolerance: ±5%
- Resistance
- 4,700 Ω
- Lowest it can be
- 4.465 kΩ
- Highest it can be
- 4.935 kΩ
- Standard value?
- Yes, E24
Value to color bands
Yellow, Violet, Red, Gold
4.7 kΩ ±5%, 4 bands, range 4.465 kΩ to 4.935 kΩ
4.7 kΩ is a standard E24 value, the series made for ±5% resistors.
- Band 1, yellow
- first digit: 4
- Band 2, violet
- second digit: 7
- Band 3, red
- multiplier: ×100
- Band 4, gold
- tolerance: ±5%
- Resistance
- 4,700 Ω
- Lowest it can be
- 4.465 kΩ
- Highest it can be
- 4.935 kΩ
- Standard value?
- Yes, E24
SMD resistor codes
4.7 kΩ
47 × 10² = 4,700 Ω
- Code type
- 3-digit code
- Working
- 47 × 10² = 4,700 Ω
- Resistance
- 4,700 Ω
- Tolerance
- not in the code; 3-digit parts are typically ±5% (E24 values)
- Found in
- E6, E12, E24, E192
- As a 3-digit code
- 472
- As a 4-digit code
- 4701
- As an EIA-96 code
- not possible
- In R notation
- 4K7
Check before you rely on it. Band colors can fade or look alike (brown, red and orange; gold and yellow), and a few makers use their own codes. Confirm a part's value with a multimeter, and check the datasheet for anything that matters.
Resistor color code chart (IEC 60062)
| Color | Digit | Multiplier | Tolerance | Temperature coefficient |
|---|---|---|---|---|
| Black | 0 | ×1 | — | 250 ppm/K |
| Brown | 1 | ×10 | ±1% | 100 ppm/K |
| Red | 2 | ×100 | ±2% | 50 ppm/K |
| Orange | 3 | ×1k | — | 15 ppm/K |
| Yellow | 4 | ×10k | — | 25 ppm/K |
| Green | 5 | ×100k | ±0.5% | 20 ppm/K |
| Blue | 6 | ×1M | ±0.25% | 10 ppm/K |
| Violet | 7 | ×10M | ±0.1% | 5 ppm/K |
| Grey | 8 | ×100M | ±0.05% | 1 ppm/K |
| White | 9 | ×1G | — | — |
| Gold | — | ×0.1 | ±5% | — |
| Silver | — | ×0.01 | ±10% | — |
| No band | — | — | ±20% | — |
3, 4, 5 and 6 band resistors
| Bands | Reading order | Example colors | Example value |
|---|---|---|---|
| 3 | digit, digit, multiplier (tolerance ±20%) | brown, black, orange | 10 kΩ ±20% |
| 4 | digit, digit, multiplier, tolerance | yellow, violet, red, gold | 4.7 kΩ ±5% |
| 5 | digit, digit, digit, multiplier, tolerance | brown, red, green, brown, brown | 1.25 kΩ ±1% |
| 6 | digit, digit, digit, multiplier, tolerance, temperature coefficient | red, red, black, black, brown, red | 220 Ω ±1%, 50 ppm/K |
E-series values for resistors (IEC 60063)
| Series | Values per decade | Matching tolerance | Values (first digits shown for the long lists) |
|---|---|---|---|
| E6 | 6 | ±20% | 1.0, 1.5, 2.2, 3.3, 4.7, 6.8 |
| E12 | 12 | ±10% | 1.0, 1.2, 1.5, 1.8, 2.2, 2.7, 3.3, 3.9, 4.7, 5.6, 6.8, 8.2 |
| E24 | 24 | ±5% | 1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3, 3.6, 3.9, 4.3, 4.7, 5.1, 5.6, 6.2, 6.8, 7.5, 8.2, 9.1 |
| E48 | 48 | ±2% | 1.00, 1.05, 1.10, 1.15, 1.21, 1.27, 1.33, 1.40, 1.47, 1.54, … |
| E96 | 96 | ±1% | 1.00, 1.02, 1.05, 1.07, 1.10, 1.13, 1.15, 1.18, 1.21, 1.24, … |
| E192 | 192 | ±0.5% and tighter | 1.00, 1.01, 1.02, 1.04, 1.05, 1.06, 1.07, 1.09, 1.10, 1.11, … |
EIA-96 two-digit codes
| Code | Value | Code | Value | Code | Value | Code | Value |
|---|---|---|---|---|---|---|---|
| 01 | 100 | 25 | 178 | 49 | 316 | 73 | 562 |
| 02 | 102 | 26 | 182 | 50 | 324 | 74 | 576 |
| 03 | 105 | 27 | 187 | 51 | 332 | 75 | 590 |
| 04 | 107 | 28 | 191 | 52 | 340 | 76 | 604 |
| 05 | 110 | 29 | 196 | 53 | 348 | 77 | 619 |
| 06 | 113 | 30 | 200 | 54 | 357 | 78 | 634 |
| 07 | 115 | 31 | 205 | 55 | 365 | 79 | 649 |
| 08 | 118 | 32 | 210 | 56 | 374 | 80 | 665 |
| 09 | 121 | 33 | 215 | 57 | 383 | 81 | 681 |
| 10 | 124 | 34 | 221 | 58 | 392 | 82 | 698 |
| 11 | 127 | 35 | 226 | 59 | 402 | 83 | 715 |
| 12 | 130 | 36 | 232 | 60 | 412 | 84 | 732 |
| 13 | 133 | 37 | 237 | 61 | 422 | 85 | 750 |
| 14 | 137 | 38 | 243 | 62 | 432 | 86 | 768 |
| 15 | 140 | 39 | 249 | 63 | 442 | 87 | 787 |
| 16 | 143 | 40 | 255 | 64 | 453 | 88 | 806 |
| 17 | 147 | 41 | 261 | 65 | 464 | 89 | 825 |
| 18 | 150 | 42 | 267 | 66 | 475 | 90 | 845 |
| 19 | 154 | 43 | 274 | 67 | 487 | 91 | 866 |
| 20 | 158 | 44 | 280 | 68 | 499 | 92 | 887 |
| 21 | 162 | 45 | 287 | 69 | 511 | 93 | 909 |
| 22 | 165 | 46 | 294 | 70 | 523 | 94 | 931 |
| 23 | 169 | 47 | 301 | 71 | 536 | 95 | 953 |
| 24 | 174 | 48 | 309 | 72 | 549 | 96 | 976 |
EIA-96 multiplier letters
| Letter | Multiplier | Example |
|---|---|---|
| Z | ×0.001 | 01Z = 0.1 Ω |
| Y or R | ×0.01 | 01Y = 1 Ω |
| X or S | ×0.1 | 01X = 10 Ω |
| A | ×1 | 01A = 100 Ω |
| B or H | ×10 | 01B = 1 kΩ |
| C | ×100 | 01C = 10 kΩ |
| D | ×1,000 | 01D = 100 kΩ |
| E | ×10,000 | 01E = 1 MΩ |
| F | ×100,000 | 01F = 10 MΩ |
SMD resistor code formats
| Format | How to read it | Example |
|---|---|---|
| 3 digits | First two digits, then a power of ten (a last digit of 9 means ×0.1) | 472 = 47 × 10² = 4.7 kΩ |
| 4 digits | First three digits, then a power of ten | 4701 = 470 × 10 = 4.7 kΩ |
| EIA-96 | Two digits pick an E96 value, the letter is the multiplier | 01C = 100 × 100 = 10 kΩ |
| R notation | R (or K, M) stands in for the decimal point | 4R7 = 4.7 Ω, R47 = 0.47 Ω, 4K7 = 4.7 kΩ |
| Zero ohm | All zeros: a link with almost no resistance | 000 = 0 Ω |
How to read a resistor color code
- Find the first band. Hold the resistor so the tolerance band is on the right. The tolerance band is usually gold or silver on a 4-band resistor, is often set a little apart from the rest, and a gold or silver band is never the first digit. If the colors are ambiguous, measure the part with a multimeter.
- Count the bands. Three, four, five or six bands. Choose that number in the calculator: 3 and 4 bands have two digits, 5 and 6 bands have three.
- Read the digits. Black is 0 up to white 9. For 4.7 kΩ the first two bands are yellow (4) and violet (7), giving 47.
- Apply the multiplier. The next band is a power of ten: red is ×100, so 47 × 100 = 4,700 Ω. Gold means ×0.1 and silver ×0.01 (for example yellow, violet, gold is 4.7 Ω).
- Read the tolerance. Gold is ±5%, so the real resistance can be anywhere from 4.465 kΩ to 4.935 kΩ. With no tolerance band the part is ±20%.
- On 6 bands, read the temperature coefficient. The last band gives how much the value drifts with temperature in ppm/K: red is 50 ppm/K, so a 50 K change moves it by about 0.25%.
Frequently asked questions
- How do you read a 4-band resistor?
- The first two bands are digits, the third is the multiplier and the fourth is the tolerance. Yellow, violet, red, gold is 4, 7, ×100, ±5%: 4.7 kΩ ±5%, so between 4.465 kΩ and 4.935 kΩ.
- What is the difference between 4-band, 5-band and 6-band resistors?
- A 5-band resistor has three digit bands, so it can show values such as 4.75k that a 4-band one cannot, and it is usually a tighter tolerance part. Brown, red, green, brown, brown is 125 × 10 = 1.25 kΩ at ±1%. A 6-band resistor adds a temperature coefficient: red, red, black, black, brown, red is 220 Ω ±1%, 50 ppm/K. A 3-band resistor has no tolerance band and is ±20%: brown, black, orange is 10 kΩ.
- Which end of the resistor do I start reading from?
- Start from the end opposite the tolerance band. The tolerance band is usually gold or silver on a 4-band resistor and is often spaced slightly apart or a little wider than the others. A gold or silver band is never the first digit. On 5- and 6-band parts the colors are less telling, so if you cannot tell, try both directions and see which gives a standard value, or measure with a multimeter.
- What do the gold and silver bands mean?
- It depends on where they are. In the multiplier place gold is ×0.1 and silver is ×0.01: yellow, violet, gold is 4.7 Ω and red, red, silver is 0.22 Ω. In the tolerance place gold is ±5% and silver is ±10%.
- What tolerance does each color stand for?
- Brown ±1%, red ±2%, green ±0.5%, blue ±0.25%, violet ±0.1%, grey ±0.05%, gold ±5%, silver ±10%, and no band ±20%. A few older tables also list orange and yellow as ±3% and ±4%; they are rare and this calculator does not use them.
- What does the sixth band mean?
- The temperature coefficient, in parts per million per kelvin (ppm/K): black 250, brown 100, red 50, orange 15, yellow 25, green 20, blue 10, violet 5 and grey 1. A brown band (100 ppm/K) means the value moves about 0.1% for each 10 K change in temperature. Treat these as typical: check the part's datasheet for its exact rating.
- What is an E-series, and why does the calculator say a value is not standard?
- Resistors are made in preferred values (IEC 60063) so that a few steps per decade cover everything: E6 for ±20%, E12 for ±10%, E24 for ±5%, E48 for ±2%, E96 for ±1% and E192 for ±0.5% and tighter. 4.5 kΩ is not an E24 value, the series made for ±5% resistors. Nearest standard values: 4.3 kΩ and 4.7 kΩ (4.7 kΩ is closer). A ±1% part would be a different list: 4.7 kΩ is not an E96 value, the series made for ±1% resistors. Nearest standard values: 4.64 kΩ and 4.75 kΩ (4.75 kΩ is closer).
- Why can a 4-band resistor not show 4.75 kΩ?
- Two digit bands carry only two significant digits. 4.75 kΩ needs three, so use a 5-band resistor: Yellow, Violet, Green, Brown, Brown (4,750 Ω, ±1%). 4.75 kΩ is a standard E96 value, the series made for ±1% resistors.
- How do I read a 3-digit SMD resistor code?
- The first two digits are the value and the third is the power of ten. 472 is 47 × 10² = 4.7 kΩ, and 100 is 10 × 1 = 10 Ω. A last digit of 9 means ×0.1, so 479 is 4.7 Ω. An R marks a decimal point: 4R7 is 4.7 Ω. These parts are typically ±5%.
- How do I read a 4-digit SMD code?
- The first three digits are the value and the fourth is the power of ten: 4701 is 470 × 10 = 4.7 kΩ and 1002 is 100 × 100 = 10 kΩ. Four-digit codes are typically found on ±1% parts. The same value in 3-digit form would be 103, and 10 kΩ is written 01C in EIA-96.
- What is the EIA-96 code?
- A short marking for ±1% parts too small for four digits. The two digits (01 to 96) pick one of the 96 E96 values and the letter is the multiplier. 01C is the E96 value 100 (code 01) times 100 (letter C) = 10 kΩ, and 68X is 499 × 0.1 = 49.9 Ω. The full table is above. A value that is not in E96 (4.7 kΩ, say) has no EIA-96 code and is marked 472 instead; its four-digit form is 4701.
- Can I trust the colors on an old resistor?
- Not completely. Heat darkens bands, brown, red and orange can look alike, and gold can pass for yellow. If a value matters, take the part out of the circuit and measure it with a multimeter; the reading should fall inside the tolerance range the calculator shows.
- Is the picture only colors?
- No. Every band in the drawing is labeled with its color name and meaning, and the results list each band in words, so the drawing can be used without telling the colors apart.
How it works
Colors, multipliers, tolerances and temperature coefficients follow the marking code of IEC 60062 (colors for resistors), the same table that manufacturers print in their datasheets; the full chart is above. The value is the digits read as one number times the multiplier (gold ×0.1, silver ×0.01), and the tolerance range is that value times (1 − t) and (1 + t). When encoding, a value is split into two (3 or 4 bands) or three (5 or 6 bands) significant digits and a power of ten from ×0.01 to ×1G; values with more digits, or outside that range, are refused with the reason. A value counts as standard if its digits are in the E-series (IEC 60063) paired with the chosen tolerance: E6 ±20%, E12 ±10%, E24 ±5%, E48 ±2%, E96 ±1%, and E192 for ±0.5% and tighter. E6, E12 and E24 are fixed lists; E48, E96 and E192 are the roots of ten (10 to the power k/N) rounded to three digits, which matches the published lists. Some manufacturers also make ±2% parts in E24 and ±1% parts in other series, so "not standard" means not in the series paired with that tolerance, not that the part cannot exist. SMD codes are read as 3-digit and 4-digit (digits and a power of ten, with a last digit of 9 as ×0.1), EIA-96 (E96 position and a multiplier letter) and R notation; the tolerance and exact meaning of a marking can vary by maker, so the code's own tolerance is described as typical. Everything is computed in your browser and nothing you enter is sent anywhere.
Sources
- IEC 60062, Marking codes for resistors and capacitors (color code and letter codes for tolerance and temperature coefficient); check the edition you work to
- IEC 60063, Preferred number series for resistors and capacitors (E-series E3 to E192)
- Panasonic Industrial Devices, Resistor Color Codes: how to interpret and calculate them
- JLCPCB, SMD Resistor Code Guide: 3-digit, 4-digit and EIA-96 (multiplier letters)
More free tools
- Battery Life CalculatorEstimate how long a battery lasts from its capacity (mAh, Ah or Wh) and load, with a usable-capacity setting and duty cycle. Or find the capacity needed.
- Wire Size CalculatorFind the smallest copper or aluminum wire size for a load: checks NEC ampacity, the 240.4(D) small-wire limits and voltage drop, and shows which governs.
- Conduit Fill CalculatorCheck how many wires fit in EMT, rigid, PVC or flexible conduit under NEC Chapter 9: fill percent, pass or fail, and the most of one wire size that fits.
- LED Resistor CalculatorFind the series resistor for an LED from supply, forward voltage and current: exact and E12/E24 value, color bands, power rating and efficiency.
- Voltage Divider CalculatorResistor divider output voltage from Vin, R1 and R2, or the R1 and R2 for a target Vout, with E12/E24/E96 values, load effect, current and power.
- Electrical Box Fill CalculatorCheck electrical box fill under NEC 314.16: count conductors, grounds, clamps, devices and loops, compare with the box volume, and see pass or fail.