Skip to main content
ponderloop

Propane Usage Calculator: How Long Will My Tank Last?

A full 500 gal tank (400 gal at the 80% fill) reordered at 20% gives 320 gal to use. With a furnace, water heater, range, dryer, fireplace, grill, generator and patio heater all at the typical ratings and hours on this page, the home burns 1,004,500 BTU a day, which is 10.98 gal of propane at 91,452 BTU per gallon, so the tank lasts 29.1 days per tank (36.4 days to empty). That is 10.05 therms or 294.4 kWh equivalent a day. Enter your own appliances, tank and price per gallon; the hours are the hours each burner runs at its full rating, so the answer is an estimate.

Figures based on the sources listed belowUpdated How we calculate

Cylinders are named by pounds of propane and hold that weight at 4.24 lb per gallon. Larger tanks are named by water capacity and are filled to 80% so the liquid has room to expand.

Of a full fill, not of the gauge. A bulk tank’s gauge reads a percent of its water capacity, and a full tank reads about 80%, so a gauge reading of 40% is about half a fill.

A planning figure: many suppliers want a refill before the tank runs low. Ask yours. Set 0 to run until empty.

Use the price on your last delivery or exchange receipt. Prices vary a lot by region, season and delivery size, so this tool does not assume one.

The share of the furnace hours the burner is really firing. A furnace cycles with the thermostat; 30% to 60% on a cold day is a typical estimate. The other appliances use their hours directly.

Typical rating: typical input 40,000 to 120,000. Use the BTU/h input on the appliance’s nameplate if you have it.

Hours in the day the heat is wanted (24 for a day it is on around the clock); the duty cycle below scales it.

Typical rating: about 40,000 for a gas tank-type heater, whose burner runs a couple of hours a day. Use the BTU/h input on the appliance’s nameplate if you have it.

Hours a day the appliance runs at its full BTU rating. Set 0 for an appliance you do not have.

Typical rating: about 65,000 with every burner and the oven on; a meal uses far less, so the hours are full-rating hours. Use the BTU/h input on the appliance’s nameplate if you have it.

Hours a day the appliance runs at its full BTU rating. Set 0 for an appliance you do not have.

Typical rating: about 35,000 for a gas dryer, and a load runs about an hour. Use the BTU/h input on the appliance’s nameplate if you have it.

Hours a day the appliance runs at its full BTU rating. Set 0 for an appliance you do not have.

Typical rating: an estimate; log sets and inserts run roughly 20,000 to 60,000. Use the BTU/h input on the appliance’s nameplate if you have it.

Hours a day the appliance runs at its full BTU rating. Set 0 for an appliance you do not have.

Typical rating: an estimate for a two- or three-burner grill; add up the burners on the nameplate. Use the BTU/h input on the appliance’s nameplate if you have it.

Hours a day the appliance runs at its full BTU rating. Set 0 for an appliance you do not have.

Typical rating: an estimate for a portable generator near full load; its manual gives gallons per hour at half and full load. Use the BTU/h input on the appliance’s nameplate if you have it.

Hours a day the appliance runs at its full BTU rating. Set 0 for an appliance you do not have.

Typical rating: an estimate for a standing patio heater. Use the BTU/h input on the appliance’s nameplate if you have it.

Hours a day the appliance runs at its full BTU rating. Set 0 for an appliance you do not have.

29.1 days per tank.

29.1 days per tank

  • Propane used per day: 10.98 gal (46.6 lb) from 1,004,500 BTU ÷ 91,452 BTU per gal
  • Propane to use before the reorder level: 320 gal (500 gal tank, from 100% of a full fill down to 20%)
  • Days until the tank is empty: 36.4 days from 100% of a full fill (400 gal)
  • Energy used per day: 1,004,500 BTU = 10.05 therms = 294.4 kWh equivalent
  • Energy in a full tank: 400 gal × 91,452 BTU = 36,580,800 BTU = 365.8 therms = 10,721 kWh equivalent
  • Cost per day: enter your price per gallon to see this
  • Cost per 30 days: enter your price per gallon to see this
  • Cost of the propane used per tank: enter your price per gallon to see this
  • Cost per therm: enter your price per gallon to see this
  • Share of the use: Furnace 67%, Water heater 8%, Range and oven 3%, Clothes dryer 3%, Gas fireplace 6%, Grill 1%, Generator 9%, Patio heater 2%

Shopping list

  • Propane tank gauge
  • Propane tank scale
  • Carbon monoxide detector
  • Propane leak detector

Saved projects

No saved projects yet.

What a tank or cylinder holds

Propane at 4.24 lb per gallon and 91,452 BTU per gallon; stationary tanks at the 80% fill. A cylinder is named by the weight of propane it holds.
Tank or cylinderPropaneWeightThermskWh equivalent
20 lb cylinder4.7 gal20 lb4.3126
30 lb cylinder7.1 gal30 lb6.5190
40 lb cylinder9.4 gal40 lb8.6253
100 lb cylinder23.6 gal100 lb21.6632
120 gal tank (80% fill)96 gal407 lb87.82,573
250 gal tank (80% fill)200 gal848 lb182.95,360
500 gal tank (80% fill)400 gal1,696 lb365.810,721
1,000 gal tank (80% fill)800 gal3,392 lb731.621,442

Propane an appliance burns per hour at the typical rating

Typical BTU/h inputs (estimates; use the nameplate figure) at full rating, with the electric kWh that has the same heat.
ApplianceBTU/hGallons per hourPounds per hourkWh equivalent per hour
Furnace80,0000.87 gal3.7123.4
Water heater40,0000.44 gal1.8511.7
Range and oven65,0000.71 gal3.0119
Clothes dryer35,0000.38 gal1.6210.3
Gas fireplace30,0000.33 gal1.398.8
Grill30,0000.33 gal1.398.8
Generator90,0000.98 gal4.1726.4
Patio heater40,0000.44 gal1.8511.7

Days a tank lasts at a steady load, burning around the clock

Worked by this calculator: cylinders run to empty, the 250 and 500 gal tanks are reordered at 20%. A steady load is the average BTU/h over the day, furnace duty cycle included.
Average loadGallons a day30 lb cylinder100 lb cylinder250 gal tank500 gal tank
20,000 BTU/h5.2 gal1.3 days4.5 days30.5 days61 days
50,000 BTU/h13.1 gal0.5 days1.8 days12.2 days24.4 days
100,000 BTU/h26.2 gal0.3 days0.9 days6.1 days12.2 days
200,000 BTU/h52.5 gal0.1 days0.4 days3 days6.1 days
400,000 BTU/h105 gal0.1 days0.2 days1.5 days3 days

Price per gallon as cost per therm and per kWh equivalent

Example prices to show the conversion, not market prices: a price per gallon ÷ 0.91452 gives the cost per therm, and the cost of the heat in a kWh is the price × 3,412 ÷ 91,452.
Price per gallonPer thermPer kWh equivalentPer pound
$2.00$2.19$0.07$0.47
$2.50$2.73$0.09$0.59
$3.00$3.28$0.11$0.71
$3.50$3.83$0.13$0.83
$4.00$4.37$0.15$0.94
$5.00$5.47$0.19$1.18

Methodology & assumptions

This is an estimate of how fast a propane tank empties, from the appliances' BTU ratings and how long they run. 1) For each appliance, BTU per day = rated BTU per hour × hours a day at that rating. The rating is the burner INPUT on the nameplate, in BTU/h (a furnace sold as 80,000 BTU/h input burns 80,000 BTU of propane an hour while it fires). Real burners cycle, so enter the hours the appliance is firing, not the hours it is switched on. The furnace is the exception: it takes the hours the heat is wanted and a duty cycle, the share of that time the burner actually fires, because a thermostat cycles the furnace on and off. Defaults of furnace 80,000 BTU/h for 24 h, water heater 40,000 BTU/h for 2 h, range and oven 65,000 BTU/h for 0.5 h, clothes dryer 35,000 BTU/h for 1 h, gas fireplace 30,000 BTU/h for 2 h, grill 30,000 BTU/h for 0.5 h, generator 90,000 BTU/h for 1 h, patio heater 40,000 BTU/h for 0.5 h (furnace duty cycle 35%) are typical estimates, not measurements. 2) Add the appliances: total BTU per day. 3) Gallons per day = BTU per day ÷ 91,452, the EIA's energy content of a gallon of propane (some sources round it to 91,500). Pounds per day = gallons × 4.24, the weight of a gallon of liquid propane at 60 °F. 4) Propane in the tank: cylinders hold their stamped weight (a 20 lb cylinder is 20 ÷ 4.24 = 4.7 gal; 30, 40 and 100 lb are the same way). Stationary tanks are named by water capacity (120, 250, 500, 1,000 gal) and are filled to no more than 80% of it so the liquid has room to expand when it warms, so a 500 gal tank holds 400 gal. Your supplier or local code decides the exact fill limit. 5) Propane to use = the tank's gallons × (the % of a full fill you start with − the % you reorder at) ÷ 100. The reorder level is a planning figure: many suppliers want a refill before the tank runs dry, and an empty tank can mean a leak test and relighting pilots. Set it to 0 to see the days to empty. 6) Days = propane to use ÷ gallons per day. 7) Cost = gallons × your price per gallon. This tool does not assume a price: the average residential propane price EIA publishes each week in its Heating Oil and Propane Update moves with the season and varies by region, so read your own price from your last delivery. Delivery fees, tank rental and minimum-delivery charges are not included. 8) Energy equivalents: 1 therm = 100,000 BTU and 1 kWh = 3,412.14 BTU (EIA). The kWh figure is the heat in the propane, not the electricity an electric appliance would need: a gas furnace is about 80% to 98% efficient and a resistance heater about 100%, a heat pump much more, so compare fuels by cost per useful heat, not by this number. Gauge readings: a bulk tank's gauge shows a percent of water capacity and a full tank reads about 80%, so the starting level here is a percent of a full fill, not of the gauge. Not covered: leaks, pilot lights, which burn a few thousand BTU a day, and the way a tank's gas pressure drops in very cold weather and limits how much a small cylinder can supply.

How to estimate how long a propane tank will last

  1. Pick the tank. Choose the cylinder or tank. Cylinders hold their stamped weight at 4.24 lb per gallon; bulk tanks hold 80% of their water capacity.
  2. Set the level and the reorder point. Enter the propane in the tank as a percent of a full fill and the level at which you would reorder.
  3. Enter each appliance. For each appliance, enter its BTU per hour from the nameplate and the hours a day it runs at full rating; use 0 for appliances you do not have. For the furnace, add the duty cycle.
  4. Read the days. Days = usable gallons ÷ gallons per day, where gallons per day = total BTU per day ÷ 91,452.
  5. Add your price. Enter your price per gallon to see the cost per day, per 30 days and per tank, and the equivalent cost per therm and per kWh.

Worked examples

ProjectResult
500 gal tank, every appliance at its typical hours, reorder at 20%1,004,500 BTU a day, 10.98 gal a day, 29.1 days per tank
A winter house on a 250 gal tank at $3.00 a gallon: furnace, water heater, range and dryer8.96 gal a day, 17.9 days per tank, $26.88 a day
Water heater, range and dryer only, on a 120 gal tank at $3.00 a gallon1.61 gal a day, 47.6 days per tank, $145.16 per 30 days
A grill used 2 hours a day on a 20 lb cylinder, run to empty0.66 gal a day, 7.2 days per tank
A generator run 8 hours a day on a 100 lb cylinder at $3.00 a gallon7.87 gal a day, 3 days per tank, $23.62 a day
A gas fireplace on 4 hours a day on a 40 lb cylinder, run to empty1.31 gal a day, 7.2 days per tank

Frequently asked questions

How long will a tank of propane last?
Divide the propane you can use by the gallons you burn a day. A 500 gal tank (400 gal at the 80% fill) reordered at 20% gives 320 gal, and the default load of 10.98 gal a day lasts 29.1 days per tank. A furnace alone often decides it: it is usually most of the propane used in winter. Put in your own appliances, hours and tank above.
How many BTU are in a gallon of propane?
91,452 BTU, the figure the US Energy Information Administration publishes for a gallon of propane; some industry sources round it to 91,500 BTU. A gallon of liquid propane weighs about 4.24 lb at 60 °F, which is about 21,600 BTU per pound. The figure changes slightly with the mix of propane and butane and with temperature.
How many gallons does a 20 lb propane cylinder hold?
About 4.7 gal of propane (20 lb ÷ 4.24 lb per gallon), which is 4.3 therms of heat. A 30 lb cylinder holds 7.1 gal, a 40 lb 9.4 gal and a 100 lb 23.6 gal. A typical grill burning 30,000 BTU/h at full rating empties a 20 lb cylinder in about 14.4 hours of cooking.
Why is a 500 gallon propane tank only filled to 400 gallons?
Propane is stored as a liquid that expands as it warms, so a stationary tank is filled to no more than about 80% of its water capacity and the rest is vapor space. A 120 gal tank holds 96 gal, a 250 gal tank 200 gal, a 500 gal tank 400 gal and a 1,000 gal tank 800 gal. NFPA 58 and local rules set the limits, and the supplier fills it for you; the exact permitted fill can change with temperature and container.
How do I read my tank gauge?
The gauge on a bulk tank shows a percent of the tank’s water capacity, and a tank filled to the 80% limit reads about 80%. So a gauge reading of 40% means about half a fill. This calculator takes the level as a percent of a full fill; to convert a gauge reading, divide it by 80 and multiply by 100 (40% on the gauge is 50% of a fill).
How much does it cost to run my propane appliances?
Gallons used × your price per gallon. At an example price of $3.00 a gallon, the default load of 10.98 gal a day costs $32.95 a day. This tool does not assume a price: enter the price on your last delivery. EIA publishes the average US residential propane price every week in the heating season, which is a useful check on what you pay; delivery fees and tank rental are extra.
How much propane does a furnace use?
At the typical 80,000 BTU/h input, a furnace firing for an hour burns 0.87 gal. With a 35% duty cycle over 24 hours that is 7.3 gal a day, though a mild day uses a small fraction of that and a very cold day more. A furnace sized by the furnace size calculator and a house with good insulation use less. Set your own hours and duty cycle.
How long will a propane generator run on a tank?
A portable generator near full load is estimated at about 90,000 BTU/h of propane, 0.98 gal an hour. A 100 lb cylinder (23.6 gal) then runs it about 24 hours at that load, and a generator at half load lasts roughly twice as long. Its manual gives the real gallons per hour; enter that as BTU/h (gallons per hour × 91,452).
How do I convert propane to therms or kWh?
One therm is 100,000 BTU and one kWh is 3,412.14 BTU, so a gallon of propane (91,452 BTU) is 0.915 therms or 26.8 kWh of heat. That is heat in the fuel, before the appliance’s efficiency: to compare with electricity, multiply by each appliance’s efficiency, or compare the cost per therm of useful heat.
Is this exact?
No. Real appliances cycle, run at partial load and vary with the weather, so the hours and ratings you enter drive the answer, and the defaults are typical estimates. For a better figure, read your tank level on two dates a few weeks apart, work out the gallons used per day, and use that. Pilot lights, leaks and cold-weather pressure loss are not counted.

Handy tools

Related calculators