Skip to main content
ponderloop

Polymeric Sand Calculator: How Many Bags Do I Need?

A 12 × 16 ft paver patio with narrow joints needs 3 bags of 50 lb polymeric sand (192 sq ft plus 10% waste is 211.2 sq ft). That uses about 75 sq ft per bag, the middle of the 65 to 85 sq ft range Alliance publishes for Gator Maxx G2 in narrow joints on a 2-3/8 in paver. Wide joints cover only 22 to 42 sq ft per bag, so pick your joint width, product and paver size, and compare with the chart on your bag.

Figures based on the sources listed belowUpdated How we calculate

Waste allowance
Each maker publishes its own coverage range per 50 lb bag. Pick the one you will buy. The Alliance figures are for its Beige, Slate Grey and Ivory colors; its Black Diamond color lists a little less (58 to 76 sq ft narrow, 20 to 38 sq ft wide).
Most interlocking pavers have narrow joints. Sakrete states its wide figure for joints of about 3/8 in; the other two state theirs for 3/4 in and wider. Joints between 3/8 and 3/4 in fall between the two: use the wide choice to be safe.
Smaller pavers have more joint per sq ft, so a bag covers less. This picks the low end, middle or high end of the maker’s published range (our estimate).
Joints run the full paver depth, so thicker pavers take more sand. Alliance’s chart assumes 2-3/8 in; other thicknesses are scaled from it (an estimate).

Buy 3 bags.

Buy 3 bags

192 sq ft + 10% waste = 211.20 sq ft

Low

$75.00

Expected

$114.00

High

$165.00

Includes 19.20 sq ft waste

How this number is calculated

192 sq ft + 10% waste = 211.20 sq ft ÷ 75 sq ft per bag = 3 bags

Shopping list

  • Polymeric sand (50 lb)
  • Push broom
  • Leaf blower
  • Plate compactor
  • Garden hose nozzle (shower setting)
  • Paver sealer
Show diagram

Saved projects

No saved projects yet.

Polymeric sand coverage per 50 lb bag, by product and joint

Sq ft per bag for a 2-3/8 in (60 mm) paver, before waste. The ends of each range are the makers’ published figures; the standard column is the midpoint, our estimate.
ProductJointSmall pavers (low end)Standard pavers (midpoint)Large pavers (high end)
Alliance Gator Maxx G2Narrow657585
Alliance Gator Maxx G2Wide223242
Techniseal HP NextGelNarrow6090120
Techniseal HP NextGelWide2532.540
Sakrete Paver Set Polymeric SandNarrow506580
Sakrete Paver Set Polymeric SandWide (about 3/8 in)203040

Bags of polymeric sand by paved area

Alliance Gator Maxx G2, standard pavers, 2-3/8 in thick, 10% waste added, rounded up to whole 50 lb bags.
Paved areaNarrow joints (75 sq ft per bag)Wide joints (32 sq ft per bag)
100 sq ft24
200 sq ft37
300 sq ft511
500 sq ft818
800 sq ft1228

Methodology & assumptions

We take the paved area as length × width in feet, subtract any left-out areas and add your waste percentage. We then divide by the sq ft one 50 lb bag covers. That coverage comes from the makers’ published ranges for a narrow and a wide joint, not from joint geometry, because the makers’ own figures include real-world losses. Within a range, small pavers use the low end, standard sizes the midpoint and large pavers the high end; this placement is our estimate. Alliance states its chart for a 2-3/8 in paver, so other thicknesses are scaled by 2-3/8 ÷ thickness, also an estimate. Techniseal’s narrow-joint range (60 to 120 sq ft) is as quoted by a distributor and has not been checked against Techniseal’s own data sheet; retailers also list 50 to 75 sq ft for that product, so treat its result as a lower-confidence figure and check the chart on your bag. Sakrete’s wide figure is for 3/8 in joints; the other two products’ wide figures are for 3/4 to 1-1/4 in. The result is an estimate; the chart on your bag has the last word.

How to calculate how much polymeric sand you need

  1. Measure the paved area. Measure the length and width of the patio or walkway in feet. Enter any planters, steps or borders that get no polymeric sand as left-out areas.
  2. Choose product and joint width. Pick the product you will buy and whether your joints are narrow (1/8 to 3/8 in) or wide (3/4 in and up). Measure the joints; do not guess.
  3. Choose paver size and thickness. Small pavers have more joint per sq ft and take more sand. Pick the size nearest yours and the paver thickness from the edge or the box.
  4. Add waste. Add 10% for sweeping loss and settling, or 5% to 15% for very neat or very rough work.
  5. Divide by coverage and round up. Divide the area with waste by the sq ft one bag covers and round up to whole bags. Compare with the chart printed on your bag.

Worked examples

ProjectResult
12 × 16 ft patio, Gator Maxx G2, narrow joints, standard pavers211.2 sq ft with 10% waste ÷ 75 sq ft per bag → 3 bags
10 × 20 ft walkway, Techniseal HP NextGel, narrow joints, large pavers210 sq ft with 5% waste ÷ 120 sq ft per bag → 2 bags
12 × 12 ft patio, Gator Maxx G2, wide joints, standard pavers158.4 sq ft with 10% waste ÷ 32 sq ft per bag → 5 bags
14 × 18 ft patio, Sakrete Paver Set, narrow joints, small 3-1/8 in pavers289.8 sq ft with 15% waste ÷ 38 sq ft per bag → 8 bags
8 × 10 ft walkway, Gator Maxx G2, narrow joints, small 2 in pavers88 sq ft with 10% waste ÷ 77.2 sq ft per bag → 2 bags

Frequently asked questions

How much polymeric sand do I need for a patio?
Multiply the paved length by width in feet, subtract anything left out, and add about 10% for waste. Divide by the sq ft one 50 lb bag covers for your product and joint width, then round up. A 12 × 16 ft patio (211.2 sq ft with waste) with narrow joints and about 75 sq ft per bag needs 3 bags. The same patio with wide joints, about 32 sq ft per bag, needs 7.
How many square feet does a 50 lb bag of polymeric sand cover?
It depends on joint width, paver size and paver thickness. Alliance publishes 65 to 85 sq ft per 50 lb bag of Gator Maxx G2 for narrow joints (1/8 to 3/8 in) and 22 to 42 sq ft for wide joints (3/4 to 1-1/4 in) on a 2-3/8 in paver. Sakrete Paver Set lists 50 to 80 sq ft for 1/8 in joints and 20 to 40 sq ft for 3/8 in joints. Distributors quote 60 to 120 sq ft for Techniseal HP NextGel in narrow joints, a figure we could not check against Techniseal’s own sheet.
Why does the range vary so much?
The sand fills the joint volume: the joint length per sq ft (set by paver size and shape), times the joint width, times the depth. Small brick pavers have far more joint than 12 × 12 in pavers, and doubling the joint width roughly halves coverage. The makers print a range rather than one number for that reason. This calculator picks the low end for small pavers, the midpoint for standard sizes and the high end for large ones. That choice is our estimate.
How wide can the joints be for polymeric sand?
It depends on the product, so read the bag. Sakrete’s sheet gives a maximum joint width of 1-1/2 in and a minimum depth of 1 in. Alliance lists Gator Maxx G2 for joints up to 4 in in a traditional installation with a minimum depth of 1-1/2 in. Techniseal lists HP NextGel as ideal from 1/16 to 1 in with a minimum depth of 1-1/2 in. Very wide joints are better filled with a stone dust or a product made for them.
How much extra should I buy?
Add about 10%: sand is lost to sweeping off the surface and blowing the paver faces clean, and joints settle after the first compaction. Use 5% for tight, neat joints and 15% for textured or tumbled pavers and uneven gaps. Buy all bags of one color at once so the lot matches, and keep the bags dry, because polymeric sand hardens when it gets wet.
Does paver thickness matter?
Yes. The joint is as deep as the paver, less a little for the sand bed edge, so a thicker paver takes more sand. Alliance’s chart is stated for a 2-3/8 in paver. We scale coverage by 2-3/8 in divided by your thickness, which makes a 3-1/8 in paver cover about 24% less per bag. That is a rule of thumb, not a published figure.
Is polymeric sand different from regular jointing sand?
Polymeric sand is fine sand blended with a binder that hardens when it is wetted after sweeping in, which resists washout, weeds and ants better than plain sand. Regular jointing sand costs less and never hardens. Sakrete’s plain Jointing Sand sheet lists about 50 to 100 sq ft per 55 lb bag, a different product from the ones in this calculator, so use the sand calculator for plain sand.

Related calculators