Percent Slope Converter
A 2% slope is 1.15°, a ratio of 1:50: it drops 2.4 in over a 10 ft run. The same conversion gives 11.31° for a 20% slope, 1.2 in (≈ 1 3/16 in) of drop for 1% over 10 feet and 45° for a 100% slope. Percent grade is rise ÷ run × 100 and the angle is the arctangent of rise ÷ run, so type a percent, an angle, a ratio like 1:12 or a drop over a run and the tool shows the other forms.
Updated Runs in your browser: nothing you enter is uploadedHow this tool works
degrees = arctan(2 ÷ 100)
2% grade = 1.15° = 1:50
It rises 2 units for every 100 units of run, 2.4 in (≈ 2 3/8 in) over 10 ft.
- Percent grade
- 2%
- Angle in degrees
- 1.15°
- Degrees, minutes, seconds
- 1° 8′ 45″
- Ratio (rise:run)
- 1:50
- Roof pitch (rise in 12)
- 0.24 in 12
- Fall or rise per foot of run
- 0.24 in (≈ 1/4 in)
- Fall or rise per metre of run
- 20 mm
- Drop or rise over 10 ft
- 2.4 in (≈ 2 3/8 in)
- Drop or rise over 10 ft, in millimetres
- 61 mm
- Length along the slope for 10 ft
- 10.002 ft
- Direction
- Rising (a positive grade)
The working
- Divide the percent grade by 100 to get the slope, rise ÷ run: 2 ÷ 100 = 0.02.
- Multiply by 100 for the percent grade: 0.02 × 100 = 2%.
- Take the arctangent for the angle: arctan(0.02) = 1.15°, which is 1° 8′ 45″.
- Divide 1 by the slope for the ratio: 1 ÷ 0.02 = 50, so the ratio is 1:50.
- Multiply the slope by the run for the drop: 0.02 × 10 ft = 2.4 in (≈ 2 3/8 in), or 61 mm.
Percent slope to degrees, 1% to 100%
| Percent grade | Degrees | Ratio (rise:run) | Inches per foot of run | Inches over 10 ft |
|---|---|---|---|---|
| 1% | 0.57° | 1:100 | 0.12 | 1.2 |
| 2% | 1.15° | 1:50 | 0.24 | 2.4 |
| 3% | 1.72° | 1:33.33 | 0.36 | 3.6 |
| 4% | 2.29° | 1:25 | 0.48 | 4.8 |
| 5% | 2.86° | 1:20 | 0.6 | 6 |
| 6% | 3.43° | 1:16.67 | 0.72 | 7.2 |
| 7% | 4° | 1:14.29 | 0.84 | 8.4 |
| 8% | 4.57° | 1:12.5 | 0.96 | 9.6 |
| 9% | 5.14° | 1:11.11 | 1.08 | 10.8 |
| 10% | 5.71° | 1:10 | 1.2 | 12 |
| 11% | 6.28° | 1:9.09 | 1.32 | 13.2 |
| 12% | 6.84° | 1:8.33 | 1.44 | 14.4 |
| 13% | 7.41° | 1:7.69 | 1.56 | 15.6 |
| 14% | 7.97° | 1:7.14 | 1.68 | 16.8 |
| 15% | 8.53° | 1:6.67 | 1.8 | 18 |
| 16% | 9.09° | 1:6.25 | 1.92 | 19.2 |
| 17% | 9.65° | 1:5.88 | 2.04 | 20.4 |
| 18% | 10.2° | 1:5.56 | 2.16 | 21.6 |
| 19% | 10.76° | 1:5.26 | 2.28 | 22.8 |
| 20% | 11.31° | 1:5 | 2.4 | 24 |
| 21% | 11.86° | 1:4.76 | 2.52 | 25.2 |
| 22% | 12.41° | 1:4.55 | 2.64 | 26.4 |
| 23% | 12.95° | 1:4.35 | 2.76 | 27.6 |
| 24% | 13.5° | 1:4.17 | 2.88 | 28.8 |
| 25% | 14.04° | 1:4 | 3 | 30 |
| 26% | 14.57° | 1:3.85 | 3.12 | 31.2 |
| 27% | 15.11° | 1:3.7 | 3.24 | 32.4 |
| 28% | 15.64° | 1:3.57 | 3.36 | 33.6 |
| 29% | 16.17° | 1:3.45 | 3.48 | 34.8 |
| 30% | 16.7° | 1:3.33 | 3.6 | 36 |
| 31% | 17.22° | 1:3.23 | 3.72 | 37.2 |
| 32% | 17.74° | 1:3.13 | 3.84 | 38.4 |
| 33% | 18.26° | 1:3.03 | 3.96 | 39.6 |
| 34% | 18.78° | 1:2.94 | 4.08 | 40.8 |
| 35% | 19.29° | 1:2.86 | 4.2 | 42 |
| 36% | 19.8° | 1:2.78 | 4.32 | 43.2 |
| 37% | 20.3° | 1:2.7 | 4.44 | 44.4 |
| 38% | 20.81° | 1:2.63 | 4.56 | 45.6 |
| 39% | 21.31° | 1:2.56 | 4.68 | 46.8 |
| 40% | 21.8° | 1:2.5 | 4.8 | 48 |
| 41% | 22.29° | 1:2.44 | 4.92 | 49.2 |
| 42% | 22.78° | 1:2.38 | 5.04 | 50.4 |
| 43% | 23.27° | 1:2.33 | 5.16 | 51.6 |
| 44% | 23.75° | 1:2.27 | 5.28 | 52.8 |
| 45% | 24.23° | 1:2.22 | 5.4 | 54 |
| 46% | 24.7° | 1:2.17 | 5.52 | 55.2 |
| 47% | 25.17° | 1:2.13 | 5.64 | 56.4 |
| 48% | 25.64° | 1:2.08 | 5.76 | 57.6 |
| 49% | 26.1° | 1:2.04 | 5.88 | 58.8 |
| 50% | 26.57° | 1:2 | 6 | 60 |
| 51% | 27.02° | 1:1.96 | 6.12 | 61.2 |
| 52% | 27.47° | 1:1.92 | 6.24 | 62.4 |
| 53% | 27.92° | 1:1.89 | 6.36 | 63.6 |
| 54% | 28.37° | 1:1.85 | 6.48 | 64.8 |
| 55% | 28.81° | 1:1.82 | 6.6 | 66 |
| 56% | 29.25° | 1:1.79 | 6.72 | 67.2 |
| 57% | 29.68° | 1:1.75 | 6.84 | 68.4 |
| 58% | 30.11° | 1:1.72 | 6.96 | 69.6 |
| 59% | 30.54° | 1:1.69 | 7.08 | 70.8 |
| 60% | 30.96° | 1:1.67 | 7.2 | 72 |
| 61% | 31.38° | 1:1.64 | 7.32 | 73.2 |
| 62% | 31.8° | 1:1.61 | 7.44 | 74.4 |
| 63% | 32.21° | 1:1.59 | 7.56 | 75.6 |
| 64% | 32.62° | 1:1.56 | 7.68 | 76.8 |
| 65% | 33.02° | 1:1.54 | 7.8 | 78 |
| 66% | 33.42° | 1:1.52 | 7.92 | 79.2 |
| 67% | 33.82° | 1:1.49 | 8.04 | 80.4 |
| 68% | 34.22° | 1:1.47 | 8.16 | 81.6 |
| 69% | 34.61° | 1:1.45 | 8.28 | 82.8 |
| 70% | 34.99° | 1:1.43 | 8.4 | 84 |
| 71% | 35.37° | 1:1.41 | 8.52 | 85.2 |
| 72% | 35.75° | 1:1.39 | 8.64 | 86.4 |
| 73% | 36.13° | 1:1.37 | 8.76 | 87.6 |
| 74% | 36.5° | 1:1.35 | 8.88 | 88.8 |
| 75% | 36.87° | 1:1.33 | 9 | 90 |
| 76% | 37.23° | 1:1.32 | 9.12 | 91.2 |
| 77% | 37.6° | 1:1.3 | 9.24 | 92.4 |
| 78% | 37.95° | 1:1.28 | 9.36 | 93.6 |
| 79% | 38.31° | 1:1.27 | 9.48 | 94.8 |
| 80% | 38.66° | 1:1.25 | 9.6 | 96 |
| 81% | 39.01° | 1:1.23 | 9.72 | 97.2 |
| 82% | 39.35° | 1:1.22 | 9.84 | 98.4 |
| 83% | 39.69° | 1:1.2 | 9.96 | 99.6 |
| 84% | 40.03° | 1:1.19 | 10.08 | 100.8 |
| 85% | 40.36° | 1:1.18 | 10.2 | 102 |
| 86% | 40.7° | 1:1.16 | 10.32 | 103.2 |
| 87% | 41.02° | 1:1.15 | 10.44 | 104.4 |
| 88% | 41.35° | 1:1.14 | 10.56 | 105.6 |
| 89% | 41.67° | 1:1.12 | 10.68 | 106.8 |
| 90% | 41.99° | 1:1.11 | 10.8 | 108 |
| 91% | 42.3° | 1:1.1 | 10.92 | 109.2 |
| 92% | 42.61° | 1:1.09 | 11.04 | 110.4 |
| 93% | 42.92° | 1:1.08 | 11.16 | 111.6 |
| 94% | 43.23° | 1:1.06 | 11.28 | 112.8 |
| 95% | 43.53° | 1:1.05 | 11.4 | 114 |
| 96% | 43.83° | 1:1.04 | 11.52 | 115.2 |
| 97% | 44.13° | 1:1.03 | 11.64 | 116.4 |
| 98% | 44.42° | 1:1.02 | 11.76 | 117.6 |
| 99% | 44.71° | 1:1.01 | 11.88 | 118.8 |
| 100% | 45° | 1:1 | 12 | 120 |
Common slope ratios in percent, degrees and inches
| Ratio (rise:run) | Percent grade | Degrees | Inches per foot of run | Inches over 10 ft | Inches over 50 ft |
|---|---|---|---|---|---|
| 1:6 | 16.67% | 9.46° | 2 | 20 | 100 |
| 1:8 | 12.5% | 7.13° | 1.5 | 15 | 75 |
| 1:10 | 10% | 5.71° | 1.2 | 12 | 60 |
| 1:12 | 8.33% | 4.76° | 1 | 10 | 50 |
| 1:15 | 6.67% | 3.81° | 0.8 | 8 | 40 |
| 1:16 | 6.25% | 3.58° | 0.75 | 7.5 | 37.5 |
| 1:20 | 5% | 2.86° | 0.6 | 6 | 30 |
| 1:24 | 4.17% | 2.39° | 0.5 | 5 | 25 |
| 1:30 | 3.33% | 1.91° | 0.4 | 4 | 20 |
| 1:40 | 2.5% | 1.43° | 0.3 | 3 | 15 |
| 1:48 | 2.08% | 1.19° | 0.25 | 2.5 | 12.5 |
| 1:50 | 2% | 1.15° | 0.24 | 2.4 | 12 |
| 1:100 | 1% | 0.57° | 0.12 | 1.2 | 6 |
Inches of drop for a percent slope over a run
| Percent grade | Over 10 ft | Over 20 ft | Over 25 ft | Over 50 ft | Over 100 ft |
|---|---|---|---|---|---|
| 0.5% | 0.6 in | 1.2 in | 1.5 in | 3 in | 6 in |
| 1% | 1.2 in | 2.4 in | 3 in | 6 in | 12 in |
| 1.5% | 1.8 in | 3.6 in | 4.5 in | 9 in | 18 in |
| 2% | 2.4 in | 4.8 in | 6 in | 12 in | 24 in |
| 2.5% | 3 in | 6 in | 7.5 in | 15 in | 30 in |
| 3% | 3.6 in | 7.2 in | 9 in | 18 in | 36 in |
| 4% | 4.8 in | 9.6 in | 12 in | 24 in | 48 in |
| 5% | 6 in | 12 in | 15 in | 30 in | 60 in |
| 10% | 12 in | 24 in | 30 in | 60 in | 120 in |
Degrees to percent slope
| Degrees | Percent grade | Ratio (rise:run) | Roof pitch |
|---|---|---|---|
| 1° | 1.75% | 1:57.29 | 0.21 in 12 |
| 2° | 3.49% | 1:28.64 | 0.42 in 12 |
| 3° | 5.24% | 1:19.08 | 0.63 in 12 |
| 4° | 6.99% | 1:14.3 | 0.84 in 12 |
| 5° | 8.75% | 1:11.43 | 1.05 in 12 |
| 6° | 10.51% | 1:9.51 | 1.26 in 12 |
| 7° | 12.28% | 1:8.14 | 1.47 in 12 |
| 8° | 14.05% | 1:7.12 | 1.69 in 12 |
| 9° | 15.84% | 1:6.31 | 1.9 in 12 |
| 10° | 17.63% | 1:5.67 | 2.12 in 12 |
| 12° | 21.26% | 1:4.7 | 2.55 in 12 |
| 15° | 26.79% | 1:3.73 | 3.22 in 12 |
| 20° | 36.4% | 1:2.75 | 4.37 in 12 |
| 25° | 46.63% | 1:2.14 | 5.6 in 12 |
| 30° | 57.74% | 1:1.73 | 6.93 in 12 |
| 35° | 70.02% | 1:1.43 | 8.4 in 12 |
| 40° | 83.91% | 1:1.19 | 10.07 in 12 |
| 45° | 100% | 1:1 | 12 in 12 |
| 50° | 119.18% | 1:0.84 | 14.3 in 12 |
| 60° | 173.21% | 1:0.58 | 20.78 in 12 |
| 70° | 274.75% | 1:0.36 | 32.97 in 12 |
| 80° | 567.13% | 1:0.18 | 68.06 in 12 |
| 85° | 1,143.01% | 1:0.0875 | 137.16 in 12 |
| 89° | 5,729% | 1:0.0175 | 687.48 in 12 |
How to convert a percent slope to degrees
- Turn the percent into a slope. Divide the percent grade by 100. For 2% that is 2 ÷ 100 = 0.02, the rise for every 1 unit of run.
- Take the arctangent. The angle is arctan(rise ÷ run). arctan(0.02) = 1.15°, which is 1° 8′ 45″. On a calculator this is the tan⁻¹ or atan key, set to degrees.
- Write it as a ratio if you need one. Divide 1 by the slope: 1 ÷ 0.02 = 50, so 2% is a 1:50 ratio (1 up for every 50 across).
- Multiply by the run for the drop. The drop is the slope times the run, both in the same unit. A 2% slope over 10 ft (120 in) drops 0.02 × 120 = 2.4 in.
Frequently asked questions
- What is a 2 percent slope in degrees?
- A 2% slope is 1.15° (1° 8′ 45″). It rises 2 units for every 100 units of run, a 1:50 ratio, and over a 10 ft run it changes height by 2.4 in (≈ 2 3/8 in). The conversion is degrees = arctan(2 ÷ 100).
- How do I convert a 20 percent slope to degrees?
- Divide by 100 and take the arctangent: arctan(20 ÷ 100) = 11.31°. A 20% slope is a 1:5 ratio, a roof pitch of 2.4 in 12, and it falls 24 inches over every 10 ft of run.
- How much is a 1 percent slope over 10 feet?
- 1.2 in (≈ 1 3/16 in). A 1% slope falls 1 foot for every 100 feet, so over 10 ft (120 in) it falls 0.01 × 120 inches. The same slope falls 0.12 inches per foot of run, and a 2% slope over 50 ft falls 12 in. The angle of a 1% slope is 0.57°.
- Why is a 100 percent slope 45 degrees and not 90?
- Percent grade compares rise with run, not with the slanted length. At 100% the rise equals the run (a 1:1 ratio), which makes a 45° angle: 100% = 45°. A surface keeps getting steeper past 100%: 200% is 63.43° and 1,000% is 84.29°. Only a vertical face reaches 90°.
- What is the percent grade of a vertical slope?
- It has none: a vertical face is 90° and has a run of 0, so rise ÷ run would divide by zero. The converter shows “Infinite (vertical)” and the ratio 1:0 (vertical) instead of a number. Percent grades above 100% are fine; only exactly vertical has none.
- What is the slope at 0 percent?
- 0% is level: 0° and no rise or fall over any run. The converter shows “Level (no rise)” for the ratio because 1:n has no finite n for a level surface.
- Can a slope or grade be negative?
- Yes. A negative grade falls instead of rising, and the same conversion applies with a minus sign: −2% is −1.15°, a ratio of −1:50, and over 10 ft it changes height by −2.4 in (≈ −2 3/8 in). The size of the angle is the same as for +2%; only the direction differs. Type a minus sign before a percent, an angle or the first number of a ratio.
- How do I convert degrees to percent slope?
- Take the tangent of the angle and multiply by 100: percent grade = tan(degrees) × 100. For 30° that is tan(30°) × 100 = 57.74%, a ratio of 1:1.73. For 45° it is exactly 100%.
- How do I find the slope from a drop and a run?
- Convert both to the same unit and divide: slope = drop ÷ run. A 2 in drop over 8 ft (96 in) is 2 ÷ 96 = 0.020833, which is 2.08% or 1.19°. The units may differ: 2% comes from a 60 mm drop over a 3 m run. Choose “Drop over a run” in the converter and type the drop and the run with their units.
- What is 1:12 in percent and degrees, and is it the ADA ramp slope?
- 1:12 means 1 unit of rise for every 12 of run: 8.33%, 4.76°. The ADA Standards for Accessible Design give 1:12 as the maximum running slope of a ramp run (section 405.2), so each inch of rise needs at least 12 inches of run. Local building codes add rules such as landings and rise limits; check the ones that apply to your project.
- How is percent slope related to roof pitch like 6:12?
- A roof pitch of 6 in 12 is the ratio 6:12, which the converter reads as 50% and 26.57°. Roof pitch is the slope times 12, so percent ÷ 100 × 12 gives the pitch: 20% is 2.4 in 12. The slope calculator shows the same figures.
- Is anything I type sent anywhere?
- No. The numbers are used only in your browser to work out the result and are not sent anywhere.
How it works
A slope is the single number s = rise ÷ run, and every form is that number written another way. Percent grade = s × 100. The angle is arctan(s) in degrees, so s = tan(angle); 45° is a slope of exactly 1 (100%). The ratio is rise : run written as 1 : (1 ÷ s); a slope steeper than 1 reads 1:0.5 and so on. Roof pitch is s × 12 “in 12”, as in the slope calculator. A drop over a run is s × run with both lengths in one unit; lengths use 1 inch = 25.4 mm exactly and 12 inches to the foot (NIST SP 811), and the run can be in feet, inches, metres, centimetres or millimetres. The length along the slope is run × √(1 + s²). A negative slope falls and is converted with a minus sign. The cases that have no finite value are named instead of printed as infinity: 90° (or a run of 0, or the ratio 1:0) is vertical with an infinite percent grade, and 0% is level, which has no 1:n ratio. Percent grades up to 1,000,000% are read. Display: percent and degrees are rounded to two decimals (a value too small for that keeps two significant digits, so a gentle slope never reads as 0), degrees are also shown as whole seconds, and inches are shown as decimals with the nearest sixteenth in brackets; angles come from floating-point trigonometry, so the last displayed digit of an extreme value can differ from a calculator by rounding. Everything runs in your browser and nothing you type is sent anywhere.
Sources
More free tools
- Slope CalculatorSlope from rise and run as percent, degrees and ratio (1:12). Convert 2% or 20% slope to degrees and find the drop over 10 ft. Feet, inches or metric.
- Stair CalculatorFind risers, treads, exact riser height, run, stair angle and stringer length from the total rise, with an IRC model-code check. Inches or metric.
- Triangle CalculatorSolve a triangle from SSS, SAS, ASA, AAS or SSA (both ambiguous solutions) or a right triangle: sides, angles, area, heights and type, with the working.
- Angle ConverterConvert degrees, radians (as exact multiples of π), gradians, turns, arcminutes, arcseconds, milliradians and NATO mils, or DMS to decimal degrees.
- DMS to Decimal Degrees ConverterConvert latitude and longitude between decimal degrees, DMS and degrees-decimal-minutes, with N/S/E/W, range checks and copy-ready Google and geo: formats.
- Pythagorean Theorem CalculatorFind the hypotenuse or a missing leg from any two sides, with area, angles and altitude. Test 3-4-5 right angles and find rectangle or screen diagonals.
- Roof Pitch CalculatorRoof pitch as x:12 from rise and run, rise and span or an angle, with the angle, slope percent, pitch multiplier and roof area from your footprint.
- French Drain CalculatorGravel in cubic yards and tons (less the pipe), 10 ft sections of perforated pipe, trench excavation and landscape fabric rolls for a French drain trench.
- Concrete Patio CalculatorBags of concrete for a poured patio from its length, width and thickness (4 in by default), with a standard or minimal waste allowance.
More: Geometry and measurementAll math & numbersAll toolsHome & DIY calculators