Skip to main content
ponderloop

DMS to Decimal Degrees Converter

40.446195, -79.982195 = 40° 26′ 46.302″ N, 79° 58′ 55.902″ W: as decimal degrees the point is 40.446195, -79.982195, and as degrees, minutes and seconds it is 40° 26′ 46.302″ N, 79° 58′ 55.902″ W; in degrees and decimal minutes it is 40° 26.7717′ N, 79° 58.9317′ W. To turn DMS into decimal degrees add the degrees, the minutes ÷ 60 and the seconds ÷ 3,600 and make south and west negative; to go back keep the whole degrees, multiply the fraction by 60 for the minutes and the rest by 60 for the seconds. The numbers are read as WGS 84 and are not converted to any other datum.

Updated Runs in your browser: nothing you enter is uploadedHow this tool works

Type latitude and longitude, separated by a comma or semicolon: 40.446195, -79.982195 or 40° 26′ 46.302″ N, 79° 58′ 55.902″ W.

40.446195, -79.982195 = 40° 26′ 46.302″ N, 79° 58′ 55.902″ W

Read as WGS 84 with no datum conversion. 6 decimal places is a step of about 11.13 cm at the equator.

Latitude

Decimal degrees
40.446195
Degrees, minutes, seconds
40° 26′ 46.302″ N
Degrees, decimal minutes
40° 26.7717′ N
Hemisphere
N (north of the equator)

Longitude

Decimal degrees
-79.982195
Degrees, minutes, seconds
79° 58′ 55.902″ W
Degrees, decimal minutes
79° 58.9317′ W
Hemisphere
W (west of the prime meridian)

Copy as

  • Decimal degrees (Google-style)40.446195, -79.982195
  • Degrees, minutes, seconds40° 26′ 46.302″ N, 79° 58′ 55.902″ W
  • Degrees, decimal minutes40° 26.7717′ N, 79° 58.9317′ W
  • geo: URIgeo:40.446195,-79.982195

The working

  1. Latitude 40.446195°: 40 whole degrees; the fraction × 60 = 26.7717 minutes, 26 of them whole; the rest × 60 = 46.302 seconds.
  2. Latitude rounded half up: 40° 26′ 46.302″ N (seconds to 3 decimals) and 40° 26.7717′ N (minutes to 4 decimals).
  3. Longitude 79.982195°: 79 whole degrees; the fraction × 60 = 58.9317 minutes, 58 of them whole; the rest × 60 = 55.902 seconds.
  4. Longitude rounded half up: 79° 58′ 55.902″ W (seconds to 3 decimals) and 79° 58.9317′ W (minutes to 4 decimals).

How precise are decimal places? Degrees, arcseconds and distance at the equator

Each row is a step of one unit in the last decimal place of a degree. The distance is about: one degree along the equator is taken as 40,075 km ÷ 360 = about 111,319.4 m, so it is only right at the equator (east-west steps get shorter towards the poles). The last two columns are the decimals the converter gives the seconds and the minutes for that many decimal degrees.
Decimal placesStep in degreesStep in arcsecondsAbout this far at the equatorSeconds decimals in DMSMinutes decimals in DDM
013,600111.3 km00
10.136011.13 km00
20.01361.113 km00
30.0013.6111.3 m01
40.00010.3611.13 m12
50.000010.0361.113 m23
60.0000010.003611.13 cm34
70.00000010.000361.113 cm45
80.000000010.0000361.113 mm56
90.0000000010.0000036111.3 µm67
100.00000000010.0000003611.13 µm78

Coordinate conversion worked examples

Each row is the converter’s own answer at 6 decimal places, latitude then longitude; ≈ marks a rounded value.
ExampleYou typeDecimal degreesDegrees, minutes, secondsDegrees, decimal minutes
Decimal degrees to DMS40.446195, -79.98219540.446195, -79.98219540° 26′ 46.302″ N, 79° 58′ 55.902″ W40° 26.7717′ N, 79° 58.9317′ W
DMS with hemisphere letters to decimal degrees40° 26′ 46.302″ N, 79° 58′ 55.902″ W40.446195, -79.98219540° 26′ 46.302″ N, 79° 58′ 55.902″ W40° 26.7717′ N, 79° 58.9317′ W
Degrees and decimal minutes40° 26.7717′ N, 79° 58.9317′ W40.446195, -79.98219540° 26′ 46.302″ N, 79° 58′ 55.902″ W40° 26.7717′ N, 79° 58.9317′ W
South and east33° 52′ 7.68″ S, 151° 12′ 33.48″ E-33.868800, 151.20930033° 52′ 7.68″ S, 151° 12′ 33.48″ E33° 52.128′ S, 151° 12.558′ E
Plain spaces, a value that never ends48 51 24 N 2 21 8 E≈ 48.856667, ≈ 2.35222248° 51′ 24″ N, 2° 21′ 8″ E48° 51.4′ N, ≈ 2° 21.1333′ E
Seconds that round up to 6010° 59′ 59.9996″ N, 20° 0′ 0″ E≈ 11.000000, 20.000000≈ 11° 0′ 0″ N, 20° 0′ 0″ E≈ 11° 0′ N, 20° 0′ E
The limits: south pole and the 180th meridian-90, -180-90.000000, -180.00000090° 0′ 0″ S, 180° 0′ 0″ W90° 0′ S, 180° 0′ W
Semicolon and decimal commas40,446195; -79,98219540.446195, -79.98219540° 26′ 46.302″ N, 79° 58′ 55.902″ W40° 26.7717′ N, 79° 58.9317′ W

Coordinate notations the converter reads

Each row types the same point, the example, in a different way; the last column is how the converter reads it, as decimal degrees at 6 decimal places.
NotationYou typeRead as decimal degrees
Decimal degrees, minus for south and west40.446195, -79.98219540.446195, -79.982195
Decimal degrees with a plus sign+40.446195, -79.98219540.446195, -79.982195
Hemisphere letter after the number40.446195 N, 79.982195 W40.446195, -79.982195
Hemisphere letter before the numberN 40.446195, W 79.98219540.446195, -79.982195
Letters stuck to the numbers, no comma40.446195N 79.982195W40.446195, -79.982195
Degree, minute and second symbols40° 26′ 46.302″ N, 79° 58′ 55.902″ W40.446195, -79.982195
Straight quotes from a keyboard40°26'46.302"N 79°58'55.902"W40.446195, -79.982195
Letters d, m and s40d 26m 46.302s N, 79d 58m 55.902s W40.446195, -79.982195
Words degrees, minutes, seconds40 degrees 26 minutes 46.302 seconds N, 79 degrees 58 minutes 55.902 seconds W40.446195, -79.982195
Numbers separated by spaces40 26 46.302 N 79 58 55.902 W40.446195, -79.982195
Numbers separated by colons40:26:46.302, -79:58:55.90240.446195, -79.982195
Degrees and decimal minutes40° 26.7717′ N, 79° 58.9317′ W40.446195, -79.982195
Longitude first, told apart by its letters79.982195 W, 40.446195 N40.446195, -79.982195
Semicolon between them, decimal commas40,446195; -79,98219540.446195, -79.982195

Range checks and what the converter says

Each row is the message the converter shows for the input in the first column; latitude must be between -90 and 90 degrees, longitude between -180 and 180, and minutes and seconds below 60.
You typeMessage
91, 10Latitude must be between -90 and 90 degrees, and 91° is outside that. Longitude is the one that goes up to 180: type it second, or add E or W.
10, 181Longitude must be between -180 and 180 degrees, and 181° is outside that.
40° 60′ 0″, 10Latitude: minutes must be below 60, and 60 is not (60 minutes make 1 degree).
40° 26′ 60″, 10Latitude: seconds must be below 60, and 60 is not (60 seconds make 1 minute).
40.1 N, 20.2 NBoth values have N or S letters: one must be the latitude (N or S) and the other the longitude (E or W).
40.1, 20.2, 30.3Use one comma between latitude and longitude. If you write decimals with a comma, separate the two coordinates with a semicolon instead.

How to convert DMS coordinates to decimal degrees, or back

  1. Type or paste both coordinates. Enter latitude and longitude in the Coordinates box, separated by a comma or a semicolon: 40.446195, -79.982195 or 40° 26′ 46.302″ N, 79° 58′ 55.902″ W. Use N, S, E or W before or after a coordinate, or a minus sign for south and west, but not both.
  2. Choose the decimal places. Pick how many decimals the decimal degrees get, 1 to 10 (6 is the default, a step of about 11.13 cm at the equator). The seconds and minutes get the matching number of decimals, so 6 decimal degrees go with 3 decimals of a second and 4 of a minute.
  3. Read both directions at once. Latitude and longitude each get a list with decimal degrees, degrees-minutes-seconds, degrees-decimal-minutes and the hemisphere, so 40.446195, -79.982195 and 40° 26′ 46.302″ N, 79° 58′ 55.902″ W give the same lists. A message names the number that is out of range or the notation it could not read.
  4. Copy the format you need. Under Copy as, each line has its own Copy button: decimal degrees as latitude, longitude (40.446195, -79.982195), the DMS string, degrees and decimal minutes, and a geo: URI (geo:40.446195,-79.982195). Copy results takes everything.
  5. Check the working by hand. The working shows each step with your numbers: Latitude: 40 + 26 ÷ 60 + 46.302 ÷ 3600 = 40.446195°. Going the other way: Latitude 40.446195°: 40 whole degrees; the fraction × 60 = 26.7717 minutes, 26 of them whole; the rest × 60 = 46.302 seconds.

Frequently asked questions

How do you convert DMS to decimal degrees?
Decimal degrees = degrees + minutes ÷ 60 + seconds ÷ 3,600, negative for south and west. Latitude: 40 + 26 ÷ 60 + 46.302 ÷ 3600 = 40.446195°. Longitude: 79 + 58 ÷ 60 + 55.902 ÷ 3600 = 79.982195°. The hemisphere letter makes it negative: -79.982195°. So 40° 26′ 46.302″ N, 79° 58′ 55.902″ W is 40.446195, -79.982195. Type the DMS in any notation from the table above: with symbols (40° 26′ 46.302″), with d m s letters, or as plain numbers separated by spaces.
How do you convert decimal degrees to degrees, minutes and seconds?
Keep the whole degrees, multiply the fraction by 60 for the minutes, keep the whole minutes, and multiply what is left by 60 for the seconds. Latitude 40.446195°: 40 whole degrees; the fraction × 60 = 26.7717 minutes, 26 of them whole; the rest × 60 = 46.302 seconds. The seconds are then rounded half up and any carry goes into the minutes and degrees: 40° 26′ 46.302″ N, 79° 58′ 55.902″ W.
What is degrees decimal minutes (DDM)?
It writes the degrees as a whole number and the minutes with a decimal fraction, with no seconds: 40° 26.7717′ N, 79° 58.9317′ W. You get it from DMS by adding the seconds ÷ 60 to the minutes (26 minutes and 46.302 seconds is 26.7717 minutes), and from decimal degrees by multiplying the fraction of a degree by 60. The converter shows it beside the DMS so you can use whichever your device or chart asks for.
What do N, S, E and W mean, and how do they relate to the minus sign?
Latitude is north (N) or south (S) of the equator and longitude is east (E) or west (W) of the prime meridian. In decimal degrees south and west are written with a minus sign: 33° 52′ 7.68″ S is -33.868800 and 151° 12′ 33.48″ E is 151.209300. Use the letter or the minus sign, not both: -33.8688 S is refused because it says south twice. Zero is written N for latitude and E for longitude: 0° 0′ 0″ N, 0° 0′ 0″ E. Use capital letters; a lowercase s means seconds.
What range checks does the converter apply?
Latitude must be between -90 and 90 degrees, longitude between -180 and 180, and minutes and seconds must be below 60; only the last number may have decimals. The limits themselves are accepted: 90, 180 reads as 90° 0′ 0″ N, 180° 0′ 0″ E. Anything else gets a specific message, for example: “Latitude must be between -90 and 90 degrees, and 91° is outside that. Longitude is the one that goes up to 180: type it second, or add E or W.” and “Latitude: minutes must be below 60, and 60 is not (60 minutes make 1 degree).”.
Which notations can I type, and in which order?
Latitude first, then longitude, separated by a comma or a semicolon. Hemisphere letters can come before or after, the degree, minute and second marks can be ° ′ ″, straight quotes, the letters d m s, or just spaces or colons, and a pair with no comma works when it has two hemisphere letters or a clear second minus sign. If you give letters the order follows them: 79.982195 W, 40.446195 N is read longitude first and listed latitude first, as 40.446195, -79.982195. Decimal commas are fine when the two coordinates are separated by a semicolon: 40,446195; -79,982195 is 40.446195, -79.982195.
How many decimal places do I need for GPS coordinates?
It depends on how close you need to be. At the equator one step of the last decimal place is about 111.3 m for 3 decimals, 11.13 m for 4, 1.113 m for 5, 11.13 cm for 6 and 1.113 cm for 7, computed from a 40,075 km circumference; east-west steps get shorter away from the equator. Choose the number of decimals that matches the accuracy of your source: extra digits do not make a position more accurate. The tool defaults to 6 and goes up to 10.
How is the rounding done, and is the conversion exact?
Every typed number is kept as an exact fraction, so DMS to decimal degrees has no floating-point drift: 40.446195 is exact. When a result is rounded it is rounded once, from the exact value, half up on the size of the number, the same north and south: 40.0000005 and 10.0000005 at 6 places give ≈ 40.000001 for the latitude. A rounded result is marked ≈. Rounding seconds up to 60 carries into the minutes and degrees: 10° 59′ 59.9996″ N becomes ≈ 11° 0′ 0″ N with ≈ 11.000000 in decimal degrees.
Why do the seconds have fewer decimals than the decimal degrees?
A second of arc is 1/3,600 of a degree, so every decimal place of the degrees is worth more than one of the seconds: the seconds get 6 − 3 decimals and the minutes 6 − 2 for the default. With 2 decimal degrees the answer is 40.45, -79.98 ≈ 40° 26′ 46″ N, 79° 58′ 56″ W, and with 10 it is 40.4461950000, -79.9821950000 = 40° 26′ 46.302″ N, 79° 58′ 55.902″ W. Pick more decimals when you want the decimal degrees to carry as much precision as the DMS you typed.
Which datum does it assume?
WGS 84 (EPSG:4326), the datum used by GPS and by most web maps. The converter only changes how the same angle is written: it does not shift coordinates from another datum such as NAD 27 or ED50 to WGS 84, so numbers taken from an old map or survey on another datum may land somewhere else on the ground. Use a datum transformation tool for that first.
What is a geo: URI?
A geo: URI (RFC 5870) writes a point as geo:latitude,longitude in decimal degrees with no spaces, WGS 84 unless stated: geo:40.446195,-79.982195. Apps that handle geo: links can open it in a map. The converter gives it with the same decimal places you picked, and a minus sign for south and west.
Does it show a map or look up a place name?
No. It only converts the numbers you type: there is no map, no address lookup and no request to a mapping service, so it works offline once the page has loaded. To check a point, copy it into the map app of your choice.

How it works

A coordinate is an exact number of degrees: degrees + minutes ÷ 60 + seconds ÷ 3,600, negative for south (S) and west (W). It is held as a fraction of two whole numbers, so nothing is rounded until the answer is written. Decimal degrees are rounded half up to the chosen number of decimals (1 to 10) on the size of the number, so 40.446195 keeps its digits and 0.0000005 becomes 0.000001 on either side of zero. DMS is the same value times 3,600 seconds, rounded half up to max(0, n − 3) decimals of a second and split into whole degrees, whole minutes and seconds, with a carry when the seconds round up to 60; degrees and decimal minutes use the value times 60 minutes, rounded to max(0, n − 2) decimals, with the same carry. Input is read as decimal degrees, degrees and decimal minutes or degrees, minutes and seconds, with ° ′ ″, d m s, words, spaces or colons; a hemisphere letter (capital N, S, E or W) before or after, or a minus sign, sets the sign; minutes and seconds must be below 60, only the last number may have decimals, latitude must be within ±90° and longitude within ±180°, and each number has at most 30 digits. The distance table takes one degree along the equator as 40,075 km ÷ 360 = about 111,319.4 m (the 40,075 km figure is the equatorial circumference of the WGS 84 ellipsoid, rounded to the kilometre), then divides by 10 for every decimal place; it is an approximation that holds at the equator only. No datum is converted: the numbers are WGS 84 in and out. The geo: URI follows the form in RFC 5870 (geo:latitude,longitude), and the decimal pair is written latitude first, as in ISO 6709, while GeoJSON (RFC 7946) lists longitude first.

Sources

All convertersAll toolsHome & DIY calculators