Skip to main content
ponderloop

Length Converter

1 mile is exactly 1.609344 kilometers, which is 1,609.344 meters, 5,280 feet or 63,360 inches. To change miles to kilometers multiply by 1.609344; to change kilometers to miles multiply by 0.621371. Every factor comes from an exact definition (1 inch = 0.0254 m, 1 foot = 0.3048 m, 1 nautical mile = 1,852 m, 1 astronomical unit = 149,597,870,700 m, 1 light-year = 9,460,730,472,580,800 m), and the converter works through meters with exact fractions, rounding only the answer. It also reads and writes feet and inches, so 5 ft 10 in, 5'10" and 5-10 all work.

Updated Runs in your browser: nothing you enter is uploadedHow this tool works

Type 1, 1,609.344 or 2.5e5. For feet and inches write 5 ft 10 in, 5'10" or 5-10: the units you type win over the From box.

1 mi = 1.609344 km

1 mi = 1.609344 km · 1 km ≈ 0.6213711922 mi

The same length in every unit

nanometer (nm)
1,609,344,000,000 nm
micrometer (micron) (µm)
1,609,344,000 µm
millimeter (mm)
1,609,344 mm
centimeter (cm)
160,934.4 cm
meter (m)
1,609.344 m
kilometer (km)
1.609344 km
inch (in)
63,360 in
foot (ft)
5,280 ft
feet and inches (ft in)
5,280 ft 0 in
yard (yd)
1,760 yd
nautical mile (nmi)
≈ 0.86897624 nmi
furlong (fur)
8 fur
chain (ch)
80 ch
rod (rd)
320 rd
fathom (ftm)
880 ftm
mil (thou) (mil)
63,360,000 mil
ångström (Å)
16,093,440,000,000 Å
astronomical unit (au)
≈ 1.07578 × 10⁻⁸ au
light-year (ly)
≈ 1.701078 × 10⁻¹³ ly

The working

  1. Meters per unit: 1 mi = 1,609.344 m and 1 km = 1,000 m.
  2. Into meters: 1 mi × 1,609.344 = 1,609.344 m.
  3. Out of meters: 1,609.344 m ÷ 1,000 = 1.609344 km.

Definitions used

  • 1 statute mile = 1,760 yards = 5,280 feet = 1,609.344 meters exactly.
  • 1 kilometer = 1,000 meters exactly.

Length units and their exact value in meters

Each unit with the number of meters in one of it, as the converter holds it. Every factor here is exact.
UnitSymbolMeters in one unitDefinition used
nanometernm0.0000000011 nanometer = 10⁻⁹ meter, a billionth of a meter, exactly.
micrometer (micron)µm0.0000011 micrometer = 10⁻⁶ meter exactly; the older name for the same length is the micron.
millimetermm0.0011 millimeter = 0.001 meter exactly.
centimetercm0.011 centimeter = 0.01 meter exactly.
meterm11 meter is the SI base unit of length.
kilometerkm1,0001 kilometer = 1,000 meters exactly.
inchin0.02541 inch = 0.0254 meter = 25.4 millimeters exactly, by the international yard and pound agreement of 1959.
footft0.30481 foot = 12 inches = 0.3048 meter exactly.
yardyd0.91441 yard = 3 feet = 36 inches = 0.9144 meter exactly.
mile (statute)mi1,609.3441 statute mile = 1,760 yards = 5,280 feet = 1,609.344 meters exactly.
nautical milenmi1,8521 nautical mile = 1,852 meters exactly (the international nautical mile).
furlongfur201.1681 furlong = 220 yards = 201.168 meters exactly.
chainch20.11681 chain = 22 yards = 20.1168 meters exactly (Gunter’s chain).
rodrd5.02921 rod = 5.5 yards = 5.0292 meters exactly.
fathomftm1.82881 fathom = 6 feet = 1.8288 meters exactly.
mil (thou)mil0.00002541 mil, also called a thou, = 0.001 inch = 0.0000254 meter exactly. It is not a millimeter.
ångströmÅ0.00000000011 ångström = 10⁻¹⁰ meter = 0.1 nanometer exactly.
astronomical unitau149,597,870,7001 astronomical unit = 149,597,870,700 meters exactly, fixed by the International Astronomical Union in 2012.
light-yearly9,460,730,472,580,8001 light-year = the distance light travels in a vacuum in one Julian year (365.25 days of 86,400 s) at 299,792,458 m/s = 9,460,730,472,580,800 meters exactly.

Length conversion table

One unit of each row converted into each column. A value that ends in decimal is written in full; a leading ≈ marks one rounded to 6 significant digits.
1 unit ofmmcmmkminftydmi
mm10.10.0010.000001≈ 0.0393701≈ 0.00328084≈ 0.00109361≈ 6.21371 × 10⁻⁷
cm1010.010.00001≈ 0.393701≈ 0.0328084≈ 0.0109361≈ 6.21371 × 10⁻⁶
m1,00010010.001≈ 39.3701≈ 3.28084≈ 1.09361≈ 0.000621371
km1,000,000100,0001,0001≈ 39,370.1≈ 3,280.84≈ 1,093.61≈ 0.621371
in25.42.540.02540.00002541≈ 0.0833333≈ 0.0277778≈ 0.0000157828
ft304.830.480.30480.0003048121≈ 0.333333≈ 0.000189394
yd914.491.440.91440.00091443631≈ 0.000568182
mi1,609,344160,934.41,609.3441.60934463,3605,2801,7601
nmi1,852,000185,2001,8521.852≈ 72,913.4≈ 6,076.12≈ 2,025.37≈ 1.15078

Inch, foot, yard and mile in meters

The four everyday imperial lengths in metric units. Each is exact because the international inch is defined as 25.4 millimeters.
UnitIn inchesIn feetIn millimetersIn metersIn kilometers
inch1≈ 0.08333333325.40.02540.0000254
foot121304.80.30480.0003048
yard363914.40.91440.0009144
mile (statute)63,3605,2801,609,3441,609.3441.609344

Metric prefixes from nano to giga

The prefixes applied to the meter, with the length of one unit in meters and in inches (a leading ≈ marks a value rounded to 6 significant digits).
PrefixSymbolPower of tenOne unit in metersOne unit in inches
nanonm10⁻⁹0.000000001≈ 3.93701 × 10⁻⁸
microµm10⁻⁶0.000001≈ 0.0000393701
millimm10⁻³0.001≈ 0.0393701
centicm10⁻²0.01≈ 0.393701
decidm10⁻¹0.1≈ 3.93701
meter itselfm10⁰1≈ 39.3701
kilokm10³1,000≈ 39,370.1
megaMm10⁶1,000,000≈ 39,370,079
gigaGm10⁹1,000,000,000≈ 39,370,078,740

Centimeters to inches, 10 to 200

Every 10 centimeters converted to inches, and to feet and inches, rounded to 6 significant digits (a leading ≈ marks a rounded value).
CentimetersInchesFeet and inches
10≈ 3.937010 ft 3.93701 in
20≈ 7.874020 ft 7.87402 in
30≈ 11.8110 ft 11.811 in
40≈ 15.7481 ft 3.74803 in
50≈ 19.6851 ft 7.68504 in
60≈ 23.6221 ft 11.622 in
70≈ 27.55912 ft 3.55906 in
80≈ 31.49612 ft 7.49606 in
90≈ 35.43312 ft 11.4331 in
100≈ 39.37013 ft 3.37008 in
110≈ 43.30713 ft 7.30709 in
120≈ 47.24413 ft 11.2441 in
130≈ 51.18114 ft 3.1811 in
140≈ 55.11814 ft 7.11811 in
150≈ 59.05514 ft 11.0551 in
160≈ 62.99215 ft 2.99213 in
170≈ 66.92915 ft 6.92913 in
180≈ 70.86615 ft 10.8661 in
190≈ 74.80316 ft 2.80315 in
200≈ 78.74026 ft 6.74016 in

Paper sizes in millimeters and inches

Each paper size in the unit it is defined in (width × height, portrait), converted to the other unit to 5 significant digits (a leading ≈ marks a rounded pair).
Paper sizeDefined asMillimetersInches
A3 (ISO 216)297 × 420 mm297 × 420≈ 11.693 × 16.535
A4 (ISO 216)210 × 297 mm210 × 297≈ 8.2677 × 11.693
A5 (ISO 216)148 × 210 mm148 × 210≈ 5.8268 × 8.2677
US Letter8.5 × 11 in215.9 × 279.48.5 × 11
US Legal8.5 × 14 in215.9 × 355.68.5 × 14

The light-year and the astronomical unit

The two astronomical lengths in familiar units. Both are exact by definition in meters; the other columns are the converter’s own answers to 8 significant digits.
UnitMetersKilometersMilesIn astronomical units
astronomical unit149,597,870,700149,597,870.7≈ 92,955,8071
light-year9,460,730,472,580,8009,460,730,472,580.8≈ 5,878,625,373,184≈ 63,241.1

Length conversion worked examples

Each row is the converter’s own answer. The working multiplies by the meters in the “from” unit and divides by the meters in the “to” unit.
ConvertWorkingAnswer
1 mi to km1 × 1,609.344 ÷ 1,000= 1.609344 km
10 km to mi10 × 1,000 ÷ 1,609.344≈ 6.2137119 mi
30 m to ft30 × 1 ÷ 0.3048≈ 98.425197 ft
150 mm to in150 × 0.001 ÷ 0.0254≈ 5.9055118 in
1 nmi to mi1 × 1,852 ÷ 1,609.344≈ 1.1507794 mi
8 ft 4 in to m(8 × 0.3048 + 4 × 0.0254) ÷ 1= 2.54 m
1 ly to km1 × 9,460,730,472,580,800 ÷ 1,000= 9,460,730,472,580.8 km
1 au to km1 × 149,597,870,700 ÷ 1,000= 149,597,870.7 km

How to convert a length from one unit to another

  1. Type the length. Enter the number in the Length box, for example 1. Thousands commas, a decimal comma, a minus sign and exponents such as 2.5e5 are read.
  2. Choose the two units. Pick the unit you have under From and the unit you want under To. The example converts 1 mi to km. Swap units reverses the direction and keeps the number.
  3. Or type feet and inches. For a measurement in two parts write it as 5 ft 10 in, 5'10" or 5-10. The units you type win over the From box, and choosing “feet and inches” under To writes the answer the same way: 1 m is 3 ft 3.3700787 in.
  4. Read the answer and the list. The result appears at once: 1 mi = 1.609344 km. Below it the same length is shown in every other unit, and the working shows the two meter factors it used.
  5. Set the rounding or do it by hand. Results are rounded to 8 significant digits by default; choose 3 to 12 digits, or all digits, to match your source. By hand, multiply by the meters in the “from” unit and divide by the meters in the “to” unit: 1 × 1,609.344 ÷ 1,000 = 1.609344 km.

Frequently asked questions

How many centimeters are in an inch?
Exactly 2.54. Since the international yard and pound agreement of 1959 an inch has been defined as 25.4 millimeters, so 1 in = 0.0254 m with no rounding. To change inches to centimeters multiply by 2.54; to change centimeters to inches divide by it, or multiply by 0.39370079. For example 10 cm is about 3.93701 in and 100 cm is about 39.3701 in.
How do I convert meters to feet?
Multiply meters by 3.280839895: 1 m ≈ 3.2808399 ft. For example 30 m is about 98.42519685 ft, and 2.54 m is about 8.33333 ft, which is 8 ft 4 in. To go back, multiply feet by 0.3048, the exact number of meters in a foot. Choose “feet and inches” under To to see 3 ft 3.3700787 in for one meter instead of a long decimal.
How many feet, yards and inches are in a mile?
A statute mile is 1,760 yards, 5,280 feet or 63,360 inches, which is exactly 1,609.344 meters or 1.609344 kilometers. In the other direction 1 km ≈ 0.62137119 mi and 1 m ≈ 0.00062137119 mi. Five miles is 8.04672 km.
How do I convert kilometers to miles?
Multiply kilometers by 0.6213711922: 1 km ≈ 0.6213711922 mi. So 10 km is about 6.2137119 mi and 42.195 km is about 26.218757 mi. Going the other way, miles × 1.609344 gives kilometers exactly, so one mile is 1.609 times as long as a kilometer.
What is the difference between a nautical mile and a statute mile?
A nautical mile is exactly 1,852 meters, set by international agreement, while a statute mile is 1,609.344 meters. The nautical mile is 1.15078 times longer: 1 nmi ≈ 1.1507794 mi, or 1.852 km. The statute mile is the everyday mile on road signs in the United States and the United Kingdom.
How do I type feet and inches?
Write the feet and the inches with their units, as 5 ft 10 in, 5 feet 10 inches or 5'10", or put a dash between them as 5-10. Text like this names its own units, so it is used whatever the From box says; when the From box is “feet and inches”, 5 10 with a space works too, and a lone number such as 5.5 is read as feet. 5 ft 10 in is 1.778 m or 70 inches. Inches may exceed 11: 5 ft 14 in is 74 inches in total, which the tool writes back as 6 ft 2 in.
What are a furlong, a chain and a rod?
Surveyors’ and racing lengths defined as exact multiples of the international yard: a rod is 5.5 yards (5.0292 m), a chain is 22 yards (20.1168 m) and a furlong is 220 yards (201.168 m). So a chain is 4 rods, a furlong is 10 chains or 40 rods, and a mile is 8 furlongs.
How long is a light-year in kilometers and miles?
A light-year is the distance light travels in a vacuum in one Julian year of 365.25 days (31,557,600 seconds) at 299,792,458 m/s. That is exactly 9,460,730,472,580,800 meters, 9,460,730,472,580.8 kilometers or about 5,878,625,373,184 miles, and about 63,241.1 astronomical units.
What is an astronomical unit?
The astronomical unit (au) is the length the International Astronomical Union fixed in 2012 at exactly 149,597,870,700 meters, close to the average distance from the Earth to the Sun. It is 149,597,870.7 km or about 92,955,807 miles, and a light-year is 63,241.1 of them.
Is a mil the same as a millimeter?
No. A mil (also called a thou) is a thousandth of an inch, 0.0000254 m or 25.4 micrometers, so a millimeter is about 39.3701 mil. Do not read mil as “millimeter”: a mil is 0.0254 mm, and thicknesses of wire, film and coatings are often quoted in it.
What are a micron, a micrometer and an ångström?
A micron is the older name for the micrometer, 10⁻⁶ m, so 1 µm = 1,000 nm, or about 0.0393701 mil. An ångström is 10⁻¹⁰ m, a tenth of a nanometer: 1 Å = 0.1 nm, and 0.0001 µm. Atom sizes and light wavelengths are often quoted in ångströms or nanometers.
How long is a fathom?
A fathom is 6 feet, exactly 1.8288 meters, and is used for water depth. So 10 fathoms is 18.288 m or 60 ft, and a nautical mile is about 1,012.6859 fathoms.
How big is A4 paper in inches, and US Letter in millimeters?
A4 is defined as 210 × 297 mm, which is ≈ 8.2677 × 11.693 in. US Letter is defined as 8.5 × 11 in, which is 215.9 × 279.4 mm. Letter is a little wider and shorter than A4, so a document sent between them is scaled or cropped. The table above has A3, A5 and Legal too.
Is it meter or metre?
They are two spellings of the same unit, 1 m. American English writes meter and kilometer; British and international English write metre and kilometre. The length is identical either way, and so is every factor here: 1 km = 1,000 m.
How exact are the answers, and why do some start with ≈?
Every factor is an exact fraction of a meter and the arithmetic uses whole-number fractions, so the only rounding is the last step, to the digits you chose. A leading ≈ means the shown digits are a rounding of a longer value, as in 1 km ≈ 0.62137119 mi; no sign means the shown value is exact, as in 1 mi = 1.609344 km. Your input is the limit in practice: a tape reading of 177.8 cm is not known to 8 digits however many the converter prints.

How it works

Every unit is held as an exact fraction of a meter built from its definition with BigInt arithmetic, never as a floating-point number. A conversion is value × (meters per input unit) ÷ (meters per output unit), computed as one exact fraction and rounded once, half away from zero, to the number of significant digits chosen (or written in full when the result ends in decimal, else 15 digits). A leading ≈ marks a rounded result. The factors: nanometer 10⁻⁹ m, micrometer (micron) 10⁻⁶ m, millimeter 0.001 m, centimeter 0.01 m, kilometer 1,000 m; inch 0.0254 m (international yard and pound agreement, 1959); foot 12 in = 0.3048 m; yard 3 ft = 0.9144 m; statute mile 1,760 yd = 1,609.344 m; nautical mile 1,852 m; furlong 220 yd, chain 22 yd, rod 5.5 yd, fathom 6 ft and mil 0.001 in; ångström 10⁻¹⁰ m; astronomical unit 149,597,870,700 m (IAU 2012); light-year = 299,792,458 m/s × 365.25 days × 86,400 s = 9,460,730,472,580,800 m. Feet-and-inches input is feet × 0.3048 + inches × 0.0254; feet-and-inches output is whole feet and the remaining inches, rounded to the digits chosen, and carries into the next foot when the inches round up to 12. Input accepts digits with thousands commas or a decimal comma, a sign, and a power of ten up to ±30 (2.5e5). The converter handles the international units only; it does not convert survey units, and it does not know what the length is a measurement of.

Sources

  • NIST Special Publication 811, Guide for the Use of the International System of Units (SI): conversion factors for length units
  • BIPM, The International System of Units (SI Brochure): the meter, SI prefixes, and the nautical mile, ångström and astronomical unit among units accepted for use with the SI
  • International yard and pound agreement of 1959: 1 yard = 0.9144 meter exactly, 1 inch = 25.4 millimeters
  • International Astronomical Union, Resolution B2 (2012): the astronomical unit is 149,597,870,700 meters
  • ISO 216: A-series paper sizes (A3 297 × 420 mm, A4 210 × 297 mm, A5 148 × 210 mm)

All convertersAll toolsHome & DIY calculators