Trig Calculator
sin(30°) = 1/2 = 0.5, an exact value. At 30° the cosine is √3/2 ≈ 0.8660254, the tangent is √3/3 ≈ 0.57735027, and the reciprocals csc, sec and cot are 2, 2√3/3 ≈ 1.1547005 and √3 ≈ 1.7320508. Choose sin, cos, tan, csc, sec or cot (or asin, acos, atan to turn a ratio back into an angle), type the angle in degrees or radians (π/6 works) and read the exact radical form for every multiple of 30° and 45°, the decimal to the significant digits you pick, the quadrant and the reference angle. Round-off is cleaned up by exact arithmetic: sin(180°) is 0, not 1.2246e−16, and tan(90°) is undefined.
Updated Runs in your browser: nothing you enter is uploadedHow this tool works
sin(30°) = 1/2 = 0.5
30° is in Quadrant I, with reference angle 30° (π/6). Sine is positive here.
- Exact value
- 1/2
- Decimal value
- 0.5
- Angle in degrees
- 30°
- Angle in radians
- π/6 ≈ 0.52359878
- Coterminal angle (0° to 360°)
- 30°
- Quadrant
- Quadrant I
- Reference angle
- 30° (π/6)
Shown to 8 significant digits. An angle that is exactly a multiple of 90° gives an exact 0, 1 or “undefined”, never round-off such as 1.2246e-16.
All six functions at this angle
| Function | Exact value | Decimal value |
|---|---|---|
| sin | 1/2 | 0.5 |
| cos | √3/2 | 0.8660254 |
| tan | √3/3 | 0.57735027 |
| csc | 2 | 2 |
| sec | 2√3/3 | 1.1547005 |
| cot | √3 | 1.7320508 |
The working
- Angle: 30° = π/6 radians (degrees × π ÷ 180 gives radians).
- 30° is already between 0° and 360°, so it is its own coterminal angle.
- 30° is in Quadrant I; the reference angle, the acute angle to the x-axis, is 30° (π/6).
- 30° is a special angle, so the exact-value table gives sin(30°) = 1/2 = 0.5 (sin θ = y on the unit circle).
- Shown to 8 significant digits. An angle that is exactly a multiple of 90° gives an exact 0, 1 or “undefined”, never round-off such as 1.2246e-16.
Exact values of sin, cos, tan, csc, sec and cot at the special angles
| Angle | Radians | sin | cos | tan | csc | sec | cot |
|---|---|---|---|---|---|---|---|
| 0° | 0 | 0 | 1 | 0 | undefined | 1 | undefined |
| 30° | π/6 | 1/2 | √3/2 | √3/3 | 2 | 2√3/3 | √3 |
| 45° | π/4 | √2/2 | √2/2 | 1 | √2 | √2 | 1 |
| 60° | π/3 | √3/2 | 1/2 | √3 | 2√3/3 | 2 | √3/3 |
| 90° | π/2 | 1 | 0 | undefined | 1 | undefined | 0 |
| 120° | 2π/3 | √3/2 | −1/2 | −√3 | 2√3/3 | −2 | −√3/3 |
| 135° | 3π/4 | √2/2 | −√2/2 | −1 | √2 | −√2 | −1 |
| 150° | 5π/6 | 1/2 | −√3/2 | −√3/3 | 2 | −2√3/3 | −√3 |
| 180° | π | 0 | −1 | 0 | undefined | −1 | undefined |
| 210° | 7π/6 | −1/2 | −√3/2 | √3/3 | −2 | −2√3/3 | √3 |
| 225° | 5π/4 | −√2/2 | −√2/2 | 1 | −√2 | −√2 | 1 |
| 240° | 4π/3 | −√3/2 | −1/2 | √3 | −2√3/3 | −2 | √3/3 |
| 270° | 3π/2 | −1 | 0 | undefined | −1 | undefined | 0 |
| 300° | 5π/3 | −√3/2 | 1/2 | −√3 | −2√3/3 | 2 | −√3/3 |
| 315° | 7π/4 | −√2/2 | √2/2 | −1 | −√2 | √2 | −1 |
| 330° | 11π/6 | −1/2 | √3/2 | −√3/3 | −2 | 2√3/3 | −√3 |
| 360° | 2π | 0 | 1 | 0 | undefined | 1 | undefined |
Unit circle table: coordinates (cos θ, sin θ) of the special angles
| Angle | Radians | Point (cos θ, sin θ) | cos θ | sin θ | Where the angle sits |
|---|---|---|---|---|---|
| 0° | 0 | (1, 0) | 1 | 0 | the positive x-axis |
| 30° | π/6 | (√3/2, 1/2) | 0.866025 | 0.5 | Quadrant I |
| 45° | π/4 | (√2/2, √2/2) | 0.707107 | 0.707107 | Quadrant I |
| 60° | π/3 | (1/2, √3/2) | 0.5 | 0.866025 | Quadrant I |
| 90° | π/2 | (0, 1) | 0 | 1 | the positive y-axis |
| 120° | 2π/3 | (−1/2, √3/2) | −0.5 | 0.866025 | Quadrant II |
| 135° | 3π/4 | (−√2/2, √2/2) | −0.707107 | 0.707107 | Quadrant II |
| 150° | 5π/6 | (−√3/2, 1/2) | −0.866025 | 0.5 | Quadrant II |
| 180° | π | (−1, 0) | −1 | 0 | the negative x-axis |
| 210° | 7π/6 | (−√3/2, −1/2) | −0.866025 | −0.5 | Quadrant III |
| 225° | 5π/4 | (−√2/2, −√2/2) | −0.707107 | −0.707107 | Quadrant III |
| 240° | 4π/3 | (−1/2, −√3/2) | −0.5 | −0.866025 | Quadrant III |
| 270° | 3π/2 | (0, −1) | 0 | −1 | the negative y-axis |
| 300° | 5π/3 | (1/2, −√3/2) | 0.5 | −0.866025 | Quadrant IV |
| 315° | 7π/4 | (√2/2, −√2/2) | 0.707107 | −0.707107 | Quadrant IV |
| 330° | 11π/6 | (√3/2, −1/2) | 0.866025 | −0.5 | Quadrant IV |
| 360° | 2π | (1, 0) | 1 | 0 | the positive x-axis |
Signs of the six functions in each quadrant
| Quadrant | Angles | sin and csc | cos and sec | tan and cot |
|---|---|---|---|---|
| Quadrant I | 0° to 90° | + | + | + |
| Quadrant II | 90° to 180° | + | − | − |
| Quadrant III | 180° to 270° | − | − | + |
| Quadrant IV | 270° to 360° | − | + | − |
Reference angle by quadrant
| Quadrant | Angles | Rule | Example angle | Reference angle |
|---|---|---|---|---|
| Quadrant I | 0° to 90° | Reference angle = θ | 25° | 25° (5π/36) |
| Quadrant II | 90° to 180° | Reference angle = 180° − θ | 150° | 30° (π/6) |
| Quadrant III | 180° to 270° | Reference angle = θ − 180° | 200° | 20° (π/9) |
| Quadrant IV | 270° to 360° | Reference angle = 360° − θ | 340° | 20° (π/9) |
Plain floating point against this calculator
| Calculation | Plain floating point | This calculator |
|---|---|---|
| sin(180°) | 1.2246467991473532e−16 | 0 |
| sin(360°) | −2.4492935982947064e−16 | 0 |
| cos(90°) | 6.123233995736766e−17 | 0 |
| cos(270°) | −1.8369701987210297e−16 | 0 |
| tan(90°) | 16331239353195370 | undefined |
| sin(30°) | 0.49999999999999994 | 0.5 |
| cos(60°) | 0.5000000000000001 | 0.5 |
| tan(45°) | 0.9999999999999999 | 1 |
Trig calculator worked examples
| Input | Result | Exact value | Where it sits |
|---|---|---|---|
| sin 30° | 0.5 | 1/2 | Quadrant I; reference angle 30° (π/6) |
| cos 135° | −0.70710678 | −√2/2 | Quadrant II; reference angle 45° (π/4) |
| sin of π/3 radians | 0.8660254 | √3/2 | Quadrant I; reference angle 60° (π/3) |
| sin 180° | 0 | 0 | On the negative x-axis; reference angle 0° (0) |
| tan 90° | undefined | undefined | On the positive y-axis; reference angle 90° (π/2) |
| csc 210° | −2 | −2 | Quadrant III; reference angle 30° (π/6) |
| sin 35° | 0.57357644 | — | Quadrant I; reference angle 35° (7π/36) |
| acos of −1/2 | 120° | 2π/3 ≈ 2.0943951 | All angles in one turn: 120° and 240° |
How to find the sine, cosine or tangent of an angle
- Pick the function. Choose sin, cos, tan, csc, sec or cot to go from an angle to a ratio, or asin, acos or atan to go from a ratio back to an angle.
- Type the angle and its unit. Enter 30 with the unit set to degrees, or choose radians and type a decimal such as 0.5236 or a multiple of π such as pi/6. Both give the same angle: 30°.
- Choose the significant digits. Pick 3 to 15 significant digits. Cosine of 30° shows as 0.866 at 4 digits and 0.866025403784 at 12.
- Read the exact and the decimal value. For 30° the tool shows the exact value 1/2 and the decimal 0.5. Multiples of 30° and 45° get a radical such as √2/2; other angles get the decimal only.
- Check the quadrant and the reference angle. The quadrant (Quadrant I here), the reference angle (30° (π/6)) and a table of all six functions at the same angle show why the value has the sign it has. Copy the results to keep them.
Frequently asked questions
- How do I calculate sin, cos and tan of an angle?
- Put the angle in standard position and read the point where its terminal side meets the unit circle: its y-coordinate is the sine, its x-coordinate the cosine, and the tangent is sine ÷ cosine. For 30° that point is (√3/2, 1/2) ≈ (0.8660254, 0.5), so tan 30° = √3/3 ≈ 0.57735027. The calculator does this for any angle, including negative angles and angles above 360°, by first reducing the angle to a small remainder from the nearest multiple of 90°.
- How do I switch between degrees and radians?
- A half turn is 180° and π radians, so multiply degrees by π ÷ 180 to get radians and radians by 180 ÷ π to get degrees. 45° is π/4 ≈ 0.78539816 radians, and π/3 radians is 60°. Set the angle unit to radians and type π as pi: pi/3, 3pi/4 and 2pi are read exactly. A plain decimal in radians such as 1.0472 is converted with π held to 100 digits and has no exact value, because it is not a multiple of π.
- Why is tan 90° undefined?
- Tangent is sine ÷ cosine, and cos 90° is exactly 0. Dividing by 0 has no value, so tan 90° is undefined, and so is tan 270° (undefined). The same happens to sec at 90° and 270°, and to csc and cot at 0° and 180° where sine is 0 (csc 0° is undefined). Just either side of 90° the tangent is huge: it is positive and growing as you approach from below, and negative on the other side, which is why the graph has a vertical asymptote there.
- Why does sin(180°) show 0 and not 1.2246e−16?
- Most programs convert degrees to radians in floating point first, and the result for 180° is the double nearest π, which is slightly different from π, so the sine of it is 1.2246e−16 instead of 0. This calculator reduces the angle exactly first (as a fraction of degrees, with no rounding), and only turns the small remainder from the nearest multiple of 90° into a decimal. When the remainder is exactly 0 the answer is exactly 0 or ±1, and a division by it is “undefined”. Nothing is rounded to zero by a tolerance: the decimal 3.14159265358979 in radians is not π, so its sine is the true 3.2385e−15.
- What are the exact values of sin, cos and tan at 30°, 45° and 60°?
- sin 30° = 1/2, cos 30° = √3/2, tan 30° = √3/3. sin 45° = cos 45° = √2/2 (0.70710678) and tan 45° = 1. sin 60° = √3/2, cos 60° = 1/2, tan 60° = √3. The first table above lists all six functions for every multiple of 30° and 45° up to 360°; every other special angle is one of these with the sign of its quadrant.
- What are csc, sec and cot?
- They are the reciprocals of the three main functions: csc θ = 1 ÷ sin θ, sec θ = 1 ÷ cos θ and cot θ = cos θ ÷ sin θ = 1 ÷ tan θ. At 30°, csc is 2 because sin 30° is 1/2, sec is 2√3/3 and cot is √3. They are undefined wherever the function they invert is 0. Do not confuse csc with sin⁻¹: sin⁻¹ means the inverse function (asin), not 1 ÷ sin.
- How do asin, acos and atan work, and why are there two answers?
- They turn a ratio back into an angle: asin returns the angle from −90° to 90° with that sine, acos the angle from 0° to 180° with that cosine, and atan the angle between −90° and 90° with that tangent. asin(0.5) is 30°, which is π/6 ≈ 0.52359878 radians; acos(−1/2) is 120° and atan(1) is 45°. A sine value repeats, so more than one angle in a full turn has it: 30° and 150° both have sine 0.5. The tool lists every angle from 0° to 360°. Type a ratio as a decimal, a fraction (1/2) or a root (√3/2 or sqrt(3)/2); exact ratios of special angles give exact angles.
- How do I find the reference angle and the quadrant?
- Reduce the angle to between 0° and 360° by adding or subtracting whole turns. Then the reference angle is θ in Quadrant I, 180° − θ in II, θ − 180° in III and 360° − θ in IV. For 150° that is 30° (π/6) in Quadrant II, so sin 150° = sin 30° = 1/2; the sign comes from the quadrant (All Students Take Calculus: all in I, sine in II, tangent in III, cosine in IV). −30° has the coterminal angle 330°, so sin(−30°) = −1/2, and 390° gives the same values as 30° (sin 390° = 1/2).
- How many significant digits should I use, and how accurate is it?
- The decimal is a double-precision number, good to about 15 significant digits, and the tool shows 3 to 15 of them without trailing zeros. cos 30° is 0.866 at 4 digits and 0.866025403784 at 12. Use as many digits as the angle you typed deserves: an angle measured to the nearest degree does not justify a 12-digit sine. Results were checked against independent Python values to within 1e-12.
- Why is there no exact value for 15° or 35°?
- Only multiples of 30° and 45° are in the exact table, because their values are the short radicals √2, √3 and fractions. Other angles have no equally short form: sin 15° = (√6 − √2) ÷ 4 needs two roots, and sin 35° has no closed form with ordinary roots at all. They still get an accurate decimal: sin 15° ≈ 0.25881905 and sin 35° ≈ 0.57357644.
- Can I type pi, negative angles or huge angles?
- Yes. In radians, write pi, π, pi/4, 3pi/4, 3*pi/4, (1/3)pi or 0.5pi; a minus sign works anywhere an angle does. An angle is kept as an exact fraction, so a huge one such as 3600000000000030 degrees is reduced exactly and gives 1/2 for the sine, the same as 30°. The inverse functions refuse a ratio they cannot take, in words: “asin needs a value from −1 to 1, and 1.5 is outside that range: no real angle has a sine that large.”
- What is the difference between sin⁻¹(0.3) and 1 ÷ sin(0.3)?
- sin⁻¹(0.3) is the angle whose sine is 0.3, 17.457603° (0.30469265 radians). 1 ÷ sin of an angle is the cosecant of that angle. The −1 on a function name is the inverse function, not a power; powers of trig functions are written sin²θ = (sin θ)².
How it works
The angle is read as an exact fraction of degrees (BigInt fractions): degrees as typed, multiples of π exactly, and a decimal in radians with π held to 100 digits. It is reduced exactly to a remainder between −45° and 45° from the nearest multiple of 90°, only that remainder becomes a double, and the quarter turns are applied as an exact rotation of (sin, cos). This keeps full relative precision close to every multiple of 90°. When the remainder is exactly 0, sine or cosine is exactly 0 and the ratios that divide by it are undefined; nothing is ever snapped by a tolerance. The exact radicals of the special angles come from a typed table of the five first-quadrant angles (0°, 30°, 45°, 60°, 90°) with the sign of the quadrant; the unit tests parse every typed value back to a number and compare it with floating point. The decimal is an IEEE 754 double (about 15.95 digits), rounded for display to 3 to 15 significant digits, with an exponent below 1e-6 and from 1e15. The inverse functions use Math.asin, Math.acos and Math.atan in double precision, except for the exact ratios 0, 1/2, √2/2, √3/2, 1, √3/3 and √3, which give exact angles. The calculator was tested against independent reference values from Python (decimal-module Taylor series at 90 digits, and math.asin, math.acos, math.atan) to 1e-12.
Sources
More free tools
- Scientific CalculatorFree online scientific calculator with live results: trig in DEG, RAD or GRAD, logs, powers, factorial, nPr, nCr, memory and history.
- Pythagorean Theorem CalculatorFind the hypotenuse or a missing leg from any two sides, with area, angles and altitude. Test 3-4-5 right angles and find rectangle or screen diagonals.
- Angle ConverterConvert degrees, radians (as exact multiples of π), gradians, turns, arcminutes, arcseconds, milliradians and NATO mils, or DMS to decimal degrees.
- Triangle CalculatorSolve a triangle from SSS, SAS, ASA, AAS or SSA (both ambiguous solutions) or a right triangle: sides, angles, area, heights and type, with the working.
- Complex Number CalculatorAdd, subtract, multiply and divide complex numbers exactly, then find the modulus, argument, polar form, powers, square roots and roots of unity.
- DMS to Decimal Degrees ConverterConvert latitude and longitude between decimal degrees, DMS and degrees-decimal-minutes, with N/S/E/W, range checks and copy-ready Google and geo: formats.
More: Geometry and measurementAll math & numbersAll toolsHome & DIY calculators