Skip to main content
ponderloop

Angle Converter

45° = π/4 rad ≈ 0.7853981634 rad: multiply degrees by π/180 to get radians, and radians by 180/π to get degrees. The same angle is 50 grad, 0.125 turn and 800 mil (a full turn is 360° = 2π rad = 400 grad = 6,400 mil), and degrees, minutes and seconds convert through decimal degrees: 40° 26′ 46″ ≈ 40.44611111°.

Updated Runs in your browser: nothing you enter is uploadedHow this tool works

Type degrees: 45, -12.5, 1/3, or 720 for two turns. Negative angles turn the other way.

45° = π/4 rad ≈ 0.7853981634 rad

That is 0.125 of a full turn (360° = 2π rad = 400 grad = 6,400 NATO mil).

Degrees
45°
Radians
π/4 rad ≈ 0.7853981634 rad
Gradians
50 grad
Turns
0.125 turn
Arcminutes
2,700′
Arcseconds
162,000″
Milliradians
250π mrad ≈ 785.3981634 mrad
NATO mils
800 mil
Degrees, minutes, seconds
45° 0′ 0″

The working

  1. 1° = π/180 rad ≈ 0.01745329252 rad.
  2. 45 × π/180 = π/4 rad ≈ 0.7853981634 rad.

Angle conversion table: one unit in every other unit

Each cell is how many of the column unit make one of the row unit, computed by the converter: an exact fraction or multiple of π where there is one, then the value rounded to 6 significant digits.
One…DegreesRadiansGradiansTurnsArcminutesArcsecondsMilliradiansNATO mils
1 degree1π/180 ≈ 0.017453310/9 ≈ 1.111111/360 ≈ 0.00277778603,60050π/9 ≈ 17.4533160/9 ≈ 17.7778
1 radian180/π ≈ 57.29581200/π ≈ 63.6621/(2π) ≈ 0.15915510800/π ≈ 3,437.75648000/π ≈ 206,2651,0003200/π ≈ 1,018.59
1 gradian0.9π/200 ≈ 0.01570810.0025543,2405π ≈ 15.70816
1 turn3602π ≈ 6.28319400121,6001,296,0002000π ≈ 6,283.196,400
1 arcminute1/60 ≈ 0.0166667π/10800 ≈ 0.0002908881/54 ≈ 0.01851851/21600 ≈ 0.00004629631605π/54 ≈ 0.2908888/27 ≈ 0.296296
1 arcsecond1/3600 ≈ 0.000277778π/648000 ≈ 0.000004848141/3240 ≈ 0.0003086421/1296000 ≈ 7.71605 × 10⁻⁷1/60 ≈ 0.01666671π/648 ≈ 0.004848142/405 ≈ 0.00493827
1 milliradian9/(50π) ≈ 0.05729580.0011/(5π) ≈ 0.0636621/(2000π) ≈ 0.00015915554/(5π) ≈ 3.43775648/π ≈ 206.265116/(5π) ≈ 1.01859
1 NATO mil0.05625π/3200 ≈ 0.0009817480.06250.000156253.375202.55π/16 ≈ 0.9817481

Common angles in degrees, radians, gradians and turns

Each row is the converter’s own answer for the angle in degrees. Radians are given exactly as a multiple of π and as a decimal rounded to 8 significant digits.
DegreesRadians (exact)Radians (decimal)GradiansTurnsArcminutesArcsecondsMilliradiansNATO mils
0°00000000
30°π/60.52359878100/3 ≈ 33.3333331/12 ≈ 0.0833333331,800108,000523.598781600/3 ≈ 533.33333
45°π/40.78539816500.1252,700162,000785.39816800
60°π/31.0471976200/3 ≈ 66.6666671/6 ≈ 0.166666673,600216,0001,047.19763200/3 ≈ 1,066.6667
90°π/21.57079631000.255,400324,0001,570.79631,600
120°2π/32.0943951400/3 ≈ 133.333331/3 ≈ 0.333333337,200432,0002,094.39516400/3 ≈ 2,133.3333
135°3π/42.35619451500.3758,100486,0002,356.19452,400
150°5π/62.6179939500/3 ≈ 166.666675/12 ≈ 0.416666679,000540,0002,617.99398000/3 ≈ 2,666.6667
180°π3.14159272000.510,800648,0003,141.59273,200
270°3π/24.7123893000.7516,200972,0004,712.3894,800
360°2π6.2831853400121,6001,296,0006,283.18536,400

Degrees to radians every 15 degrees

Each row is the converter’s own answer; radians are exact multiples of π with the decimal rounded to 8 significant digits.
DegreesRadians (exact)Radians (decimal)GradiansTurnsNATO mils
0°00000
15°π/120.2617993950/3 ≈ 16.6666671/24 ≈ 0.041666667800/3 ≈ 266.66667
30°π/60.52359878100/3 ≈ 33.3333331/12 ≈ 0.0833333331600/3 ≈ 533.33333
45°π/40.78539816500.125800
60°π/31.0471976200/3 ≈ 66.6666671/6 ≈ 0.166666673200/3 ≈ 1,066.6667
75°5π/121.3089969250/3 ≈ 83.3333335/24 ≈ 0.208333334000/3 ≈ 1,333.3333
90°π/21.57079631000.251,600
105°7π/121.8325957350/3 ≈ 116.666677/24 ≈ 0.291666675600/3 ≈ 1,866.6667
120°2π/32.0943951400/3 ≈ 133.333331/3 ≈ 0.333333336400/3 ≈ 2,133.3333
135°3π/42.35619451500.3752,400
150°5π/62.6179939500/3 ≈ 166.666675/12 ≈ 0.416666678000/3 ≈ 2,666.6667
165°11π/122.8797933550/3 ≈ 183.3333311/24 ≈ 0.458333338800/3 ≈ 2,933.3333
180°π3.14159272000.53,200
195°13π/123.403392650/3 ≈ 216.6666713/24 ≈ 0.5416666710400/3 ≈ 3,466.6667
210°7π/63.6651914700/3 ≈ 233.333337/12 ≈ 0.5833333311200/3 ≈ 3,733.3333
225°5π/43.92699082500.6254,000
240°4π/34.1887902800/3 ≈ 266.666672/3 ≈ 0.6666666712800/3 ≈ 4,266.6667
255°17π/124.4505896850/3 ≈ 283.3333317/24 ≈ 0.7083333313600/3 ≈ 4,533.3333
270°3π/24.7123893000.754,800
285°19π/124.9741884950/3 ≈ 316.6666719/24 ≈ 0.7916666715200/3 ≈ 5,066.6667
300°5π/35.23598781000/3 ≈ 333.333335/6 ≈ 0.8333333316000/3 ≈ 5,333.3333
315°7π/45.49778713500.8755,600
330°11π/65.75958651100/3 ≈ 366.6666711/12 ≈ 0.9166666717600/3 ≈ 5,866.6667
345°23π/126.02138591150/3 ≈ 383.3333323/24 ≈ 0.9583333318400/3 ≈ 6,133.3333
360°2π6.283185340016,400

Angle units and their definitions

The size of each unit in radians (exact) and in degrees, computed by the converter from the definition in the second column.
UnitDefinitionIn radians (exact)In degrees
Degrees (°)1° = π/180 rad, so a full turn is 360°π/180 rad1
Radians (rad)1 rad is the angle whose arc equals its radius; a full turn is 2π rad1 rad180/π ≈ 57.29578
Gradians (grad)1 grad = π/200 rad, so a full turn is 400 grad and a right angle is 100 gradπ/200 rad0.9
Turns (turn)1 turn = 2π rad = 360°2π rad360
Arcminutes (′)1′ = 1/60 of a degreeπ/10800 rad1/60 ≈ 0.016666667
Arcseconds (″)1″ = 1/60 of an arcminute = 1/3,600 of a degreeπ/648000 rad1/3600 ≈ 0.00027777778
Milliradians (mrad)1 mrad = 1/1,000 rad0.001 rad9/(50π) ≈ 0.05729578
NATO mils (mil)1 NATO mil = 1/6,400 of a turn = π/3200 radπ/3200 rad0.05625

Angle conversion worked examples

Each row is the converter’s own working and answer for the angle in the first column.
ConversionWorkingAnswer
45 degrees to radians1° = π/180 rad ≈ 0.01745329252 rad. 45 × π/180 = π/4 rad ≈ 0.7853981634 rad.π/4 rad ≈ 0.7853981634 rad
1 radian to degrees1 rad = 180/π° ≈ 57.29577951°. 1 × 180/π = 180/π° ≈ 57.29577951°.180/π° ≈ 57.29577951°
3π/4 radians to degrees1 rad = 180/π° ≈ 57.29577951°. 3π/4 × 180/π = 135°.135°
100 gradians to degrees1 grad = 0.9°. 100 × 0.9 = 90°.90°
0.25 turns to radians1 turn = 2π rad ≈ 6.283185307 rad. 0.25 × 2π = π/2 rad ≈ 1.570796327 rad.π/2 rad ≈ 1.570796327 rad
90 degrees to NATO mils1° = 160/9 mil ≈ 17.77777778 mil. 90 × 160/9 = 1,600 mil.1,600 mil
3,600 arcseconds to degrees1″ = 1/3600° ≈ 0.0002777777778°. 3,600 × 1/3600 = 1°.1°
1 arcsecond to radians1″ = π/648000 rad ≈ 0.000004848136811 rad. 1 × π/648000 = π/648000 rad ≈ 0.000004848136811 rad.π/648000 rad ≈ 0.000004848136811 rad
40° 26′ 46″ to decimal degreesDegrees = 40 + 26 ÷ 60 + 46 ÷ 3600 = 72803/1800° ≈ 40.44611111°.≈ 40.44611111°
40.446111 degrees to DMSSplit the decimal degrees: the whole degrees stay, the fraction × 60 gives minutes, and what is left of those × 60 gives seconds. 40° 26′ 45.9996″.40° 26′ 45.9996″

How to convert an angle between degrees, radians and other units

  1. Type the angle and pick its unit. Enter the number in the Angle box and choose the unit it is in under From. Radians can be typed as a decimal (1.5708) or as a multiple of π (pi/2, 3pi/4); degrees, minutes and seconds can be typed as 40° 26′ 46″ or 40 26 46.
  2. Choose the unit you want. Pick it under To. The big line answers for that unit and the list below shows the angle in every other unit at once, so 45° reads π/4 rad ≈ 0.7853981634 rad.
  3. Read the exact form for radians. When the angle is a fraction of a turn the radian answer is an exact multiple of π: π/2 for 90°, π/4 for 45°, π/180 for 1°. The decimal beside it is rounded to the number of significant digits you choose.
  4. Use the factor to do it by hand. Degrees to radians: multiply by π/180. Radians to degrees: multiply by 180/π. Degrees to gradians: multiply by 10/9. The working under the result shows the factor and the multiplication for your numbers.
  5. Copy or swap. Use Copy results to take every unit with you, or Swap units to convert the answer back: the box is filled with the exact answer, so the round trip returns the angle you started with.

Frequently asked questions

How do you convert degrees to radians?
Multiply the degrees by π/180, which is the same as writing the degrees as a fraction of 180 and multiplying by π. 45° = π/4 rad ≈ 0.7853981634 rad. Also 90° = π/2 rad ≈ 1.570796327 rad and 180° = π rad ≈ 3.141592654 rad. The converter shows the exact multiple of π and the decimal side by side.
How do you convert radians to degrees?
Multiply the radians by 180/π. When the radians are a multiple of π the π cancels and the degrees are exact: π/6 rad = 30° and 3π/4 rad = 135°. A plain decimal needs the value of π: 1 rad = 180/π° ≈ 57.29577951°.
How many degrees are in a radian, and how many radians in a full circle?
One radian is 180/π degrees, 180/π° ≈ 57.29577951°. A full turn is 360° = 2π rad, which is 2π rad ≈ 6.283185307 rad as a decimal, because the circumference of a circle is 2π times its radius and one radian is the angle whose arc is one radius long.
What is a gradian (grad or gon)?
A gradian divides a right angle into 100 parts, so a full turn is 400 grad: 90° = 100 grad, and 1 grad = 0.9°. It is also called a gon. To convert degrees to gradians multiply by 10/9; to convert gradians to degrees multiply by 0.9.
How many arcminutes and arcseconds are in a degree?
A degree has 60′ and 3,600″; an arcminute has 60″. In radians one arcsecond is π/648000 rad ≈ 0.000004848136811 rad, and one arcminute is π/10800 rad ≈ 0.0002908882087 rad. These are the minute and second of arc, not of time.
What is the difference between a milliradian and a NATO mil?
A milliradian is exactly 1/1,000 of a radian, so a full turn is 2000π mrad ≈ 6,283.185 mrad. The NATO mil divides the turn into 6,400 mil instead, so that a right angle is a round 1,600 mil: 1 mil = 0.05625° and 1 mil = 5π/16 mrad ≈ 0.9817477042 mrad. A NATO mil is therefore a little smaller than a milliradian, so a scope or compass should say which one it uses.
How do you convert degrees, minutes and seconds to decimal degrees?
Add the degrees, the minutes divided by 60 and the seconds divided by 3,600. For 40° 26′ 46″ that is 40 + 26/60 + 46/3600, so 40° 26′ 46″ ≈ 40.44611111°. Choose DMS under From and type the angle in any common notation: 40° 26′ 46″, 40d 26m 46s, 40 26 46.5 or 40:26:46. Minutes and seconds must be below 60, and only the last number may have decimals; put a minus sign in front, or a capital S or W after, for a negative angle.
How do you convert decimal degrees to degrees, minutes and seconds?
Keep the whole degrees, multiply the fractional part by 60 for the minutes, keep the whole minutes, and multiply what is left by 60 for the seconds. 40.446111° = 40° 26′ 45.9996″. The seconds are rounded to the number of decimals that goes with the significant digits you chose, and a rounding up carries into the minutes and degrees: 29.99999999° ≈ 30° 0′ 0″.
Why are radians written as multiples of π?
Because π is the ratio of a circle’s circumference to its diameter, an angle that is a simple fraction of a turn is a simple multiple of π radians: π/6, π/4, π/3, π/2. A decimal such as 0.785398 rad hides that pattern and is only an approximation, since π never ends. The exact form is the one textbooks use.
Is the conversion exact, and how many digits of π does it use?
Between degrees, gradians, turns, arcminutes, arcseconds and NATO mils every factor is an exact fraction, such as 160/9 NATO mils per degree, so nothing is rounded until the answer is displayed. Radians are kept as an exact multiple of π, and a decimal is computed from π to 100 decimal places with whole-number arithmetic, far more than the 30 significant digits you can ask for: 180/π° ≈ 57.2957795130823208767981548141°.
How are negative angles and angles over 360° handled?
They convert like any other angle and keep their sign: −725° is −145π/36 rad and ≈ −2.013888889 turn. Because an angle that differs by a whole number of turns points the same way, the result list adds the same direction inside one turn when the angle is outside 0° to 360°: 355° for −725°. A limit of 10^15 in the chosen unit keeps the arithmetic exact.
What is the difference between a turn and a revolution?
Nothing: both mean one full rotation, 360° = 2π rad. The converter calls it a turn. A quarter turn is 90°, a half turn 180°, and 1,296,000″ make one turn.

How it works

Every unit is a rational multiple of a turn, and the radian is 1/(2π) of a turn. The converter therefore keeps an angle as a coefficient times a power of π: 45° is 45 × (π/180) rad, exactly π/4 rad, and one plain radian is 180/π degrees. Sizes in radians: degree π/180, gradian π/200, turn 2π, arcminute π/10,800, arcsecond π/648,000, NATO mil π/3,200 (a turn of 6,400 mils), milliradian 1/1,000 (no π). Converting multiplies by the ratio of two sizes, so conversions among degree-like units are exact fractions, a multiple of π appears only when the radian side has no π, and converting back always returns the starting value. A decimal needs π as digits: 100 decimals of π are stored (3.14159265358979323846264338327950288419716939937510…, the decimal expansion of π; the unit tests recompute them with Machin’s formula) and every sum is whole-number BigInt arithmetic, never floating point, so the result is correct to far more than the 30 significant digits offered. Results are rounded half away from zero; ≈ marks a rounded value and values below 10⁻⁶ or from 10¹⁵ up are written in scientific notation. The definitions follow the SI Brochure and NIST SP 811: the radian is the coherent SI unit of plane angle, 1° = (π/180) rad, 1′ = 1/60 of a degree and 1″ = 1/60 of a minute; the gradian (gon) is 1/400 of a turn; the NATO mil is 1/6,400 of a turn, while the true milliradian is 1/1,000 of a radian, so the two differ and are offered as separate units. Degrees, minutes and seconds are read as degrees + minutes ÷ 60 + seconds ÷ 3,600; minutes and seconds must be below 60, only the last number may have decimals, a leading minus or a capital S or W makes the angle negative, and a decimal-degree answer is split into degrees, minutes and seconds with the seconds rounded and any carry passed up. Angles up to 10^15 of the chosen unit and numbers of up to 30 digits are accepted.

Sources

All convertersAll toolsHome & DIY calculators