Skip to main content
ponderloop

Pressure Converter

32 psi is about 2.20632 bar, which is 220.632 kPa or 2.17747 atm. To change psi to bar, multiply by 0.0689476; to change bar to psi, multiply by 14.5038. Every factor comes from an exact definition (1 atm = 101,325 Pa, 1 bar = 100,000 Pa, 1 psi = 1 lbf per square inch, with 1 lbf = 4.4482216152605 N) and the converter works through pascals with exact fractions, rounding only the answer. Its mmHg and inHg are the conventional ones, 133.322387415 Pa and 3,386.388640341 Pa.

Updated Runs in your browser: nothing you enter is uploadedHow this tool works

Type 32, 1,013.25 or 2.5e5. A negative value is fine for a reading below atmospheric pressure.

32 psi ≈ 2.20632 bar

1 psi ≈ 0.06894757293 bar · 1 bar ≈ 14.50377377 psi

The same pressure in every unit

pascal (Pa)
≈ 220,632 Pa
kilopascal (kPa)
≈ 220.632 kPa
megapascal (MPa)
≈ 0.220632 MPa
bar
≈ 2.20632 bar
millibar (mbar)
≈ 2,206.32 mbar
hectopascal (hPa)
≈ 2,206.32 hPa
standard atmosphere (atm)
≈ 2.17747 atm
torr
≈ 1,654.88 torr
millimeter of mercury (mmHg)
≈ 1,654.88 mmHg
inch of mercury (inHg)
≈ 65.1527 inHg
kilogram-force per square centimeter (kgf/cm²)
≈ 2.24982 kgf/cm²

The working

  1. Pascals per unit: 1 psi ≈ 6,894.75729317 Pa and 1 bar = 100,000 Pa.
  2. Into pascals: 32 psi × 6,894.75729317 ≈ 220,632.2334 Pa.
  3. Out of pascals: 220,632.2334 Pa ÷ 100,000 ≈ 2.20632 bar.

Definitions used

  • 1 psi = 1 pound-force per square inch = 0.45359237 kg × 9.80665 m/s² ÷ (0.0254 m)², exact from the definitions of the pound, standard gravity and the inch.
  • 1 bar = 100,000 pascals exactly.

Pressure units and their exact value in pascals

Each unit with the number of pascals in one of it, as the converter holds it. A leading ≈ marks a value that never ends in decimal and is cut at 15 digits.
UnitSymbolPascals in one unitDefinition used
pascalPa11 pascal = 1 newton per square meter, the SI unit of pressure.
kilopascalkPa1,0001 kilopascal = 1,000 pascals exactly.
megapascalMPa1,000,0001 megapascal = 1,000,000 pascals exactly.
barbar100,0001 bar = 100,000 pascals exactly.
millibarmbar1001 millibar = 0.001 bar = 100 pascals exactly, the same as 1 hectopascal.
hectopascalhPa1001 hectopascal = 100 pascals exactly, the same as 1 millibar.
standard atmosphereatm101,3251 standard atmosphere = 101,325 pascals exactly.
pound-force per square inchpsi≈ 6,894.757293168361 psi = 1 pound-force per square inch = 0.45359237 kg × 9.80665 m/s² ÷ (0.0254 m)², exact from the definitions of the pound, standard gravity and the inch.
torrtorr≈ 133.3223684210531 torr = 1/760 of a standard atmosphere = 101,325 ÷ 760 pascals exactly.
millimeter of mercurymmHg133.3223874151 mmHg is the conventional millimeter of mercury, 133.322387415 pascals exactly (mercury at 13,595.1 kg/m³, standard gravity 9.80665 m/s²).
inch of mercuryinHg3,386.3886403411 inHg is the conventional inch of mercury, 25.4 conventional mmHg = 3,386.388640341 pascals exactly.
kilogram-force per square centimeterkgf/cm²98,066.51 kgf/cm² = 9.80665 newtons ÷ 0.0001 m² = 98,066.5 pascals exactly, also called the technical atmosphere.

Pressure conversion table

One unit of each row converted into each column, to 6 significant digits (a leading ≈ marks a rounded value). A millibar is the same as a hectopascal.
1 unit ofPakPabaratmpsimmHginHg
Pa10.0010.00001≈ 9.86923 × 10⁻⁶≈ 0.000145038≈ 0.00750062≈ 0.0002953
kPa1,00010.01≈ 0.00986923≈ 0.145038≈ 7.50062≈ 0.2953
MPa1,000,0001,00010≈ 9.86923≈ 145.038≈ 7,500.62≈ 295.3
bar100,0001001≈ 0.986923≈ 14.5038≈ 750.062≈ 29.53
hPa1000.10.001≈ 0.000986923≈ 0.0145038≈ 0.750062≈ 0.02953
atm101,325101.3251.013251≈ 14.6959≈ 760≈ 29.9213
psi≈ 6,894.76≈ 6.89476≈ 0.0689476≈ 0.0680461≈ 51.7149≈ 2.03602
torr≈ 133.322≈ 0.133322≈ 0.00133322≈ 0.00131579≈ 0.0193368≈ 1≈ 0.0393701
mmHg≈ 133.322≈ 0.133322≈ 0.00133322≈ 0.00131579≈ 0.01933681≈ 0.0393701
inHg≈ 3,386.39≈ 3.38639≈ 0.0338639≈ 0.0334211≈ 0.49115425.41
kgf/cm²98,066.598.06650.980665≈ 0.967841≈ 14.2233≈ 735.559≈ 28.959

psi to kPa, bar and atm

Common pressures in psi converted by the tool, to 6 significant digits.
psikPabaratmmmHg
5≈ 34.4738≈ 0.344738≈ 0.34023≈ 258.575
10≈ 68.9476≈ 0.689476≈ 0.68046≈ 517.149
14.7≈ 101.353≈ 1.01353≈ 1.00028≈ 760.209
15≈ 103.421≈ 1.03421≈ 1.02069≈ 775.724
20≈ 137.895≈ 1.37895≈ 1.36092≈ 1,034.3
25≈ 172.369≈ 1.72369≈ 1.70115≈ 1,292.87
30≈ 206.843≈ 2.06843≈ 2.04138≈ 1,551.45
32≈ 220.632≈ 2.20632≈ 2.17747≈ 1,654.88
35≈ 241.317≈ 2.41317≈ 2.38161≈ 1,810.02
40≈ 275.79≈ 2.7579≈ 2.72184≈ 2,068.6
50≈ 344.738≈ 3.44738≈ 3.4023≈ 2,585.75
60≈ 413.685≈ 4.13685≈ 4.08276≈ 3,102.9
80≈ 551.581≈ 5.51581≈ 5.44368≈ 4,137.19
100≈ 689.476≈ 6.89476≈ 6.8046≈ 5,171.49
120≈ 827.371≈ 8.27371≈ 8.16552≈ 6,205.79
150≈ 1,034.21≈ 10.3421≈ 10.2069≈ 7,757.24
200≈ 1,378.95≈ 13.7895≈ 13.6092≈ 10,343

bar to psi, kPa and kgf/cm²

Common pressures in bar converted by the tool, to 6 significant digits.
barpsikPaMPakgf/cm²
0.5≈ 7.25189500.05≈ 0.509858
1≈ 14.50381000.1≈ 1.01972
1.5≈ 21.75571500.15≈ 1.52957
2≈ 29.00752000.2≈ 2.03943
2.5≈ 36.25942500.25≈ 2.54929
3≈ 43.51133000.3≈ 3.05915
4≈ 58.01514000.4≈ 4.07886
5≈ 72.51895000.5≈ 5.09858
6≈ 87.02266000.6≈ 6.1183
8≈ 116.038000.8≈ 8.15773
10≈ 145.0381,0001≈ 10.1972
16≈ 232.061,6001.6≈ 16.3155
100≈ 1,450.3810,00010≈ 101.972
200≈ 2,900.7520,00020≈ 203.943

One standard atmosphere and one bar in every unit

The two reference pressures most often converted, to 6 significant digits. The atmosphere is 760 torr but a hair under 760 conventional mmHg.
Unit1 atm equals1 bar equals
Pa101,325100,000
kPa101.325100
MPa0.1013250.1
bar1.013251
mbar1,013.251,000
hPa1,013.251,000
atm1≈ 0.986923
psi≈ 14.6959≈ 14.5038
torr760≈ 750.062
mmHg≈ 760≈ 750.062
inHg≈ 29.9213≈ 29.53
kgf/cm²≈ 1.03323≈ 1.01972

Pressure conversion worked examples

Each row is the converter’s own answer. The working multiplies by the pascals in the “from” unit and divides by the pascals in the “to” unit.
ConvertWorkingAnswer
32 psi to bar32 × 6,894.757293 ÷ 100,000≈ 2.20632 bar
1 bar to psi1 × 100,000 ÷ 6,894.757293≈ 14.5038 psi
101.325 kPa to atm101.325 × 1,000 ÷ 101,325= 1 atm
760 mmHg to kPa760 × 133.3223874 ÷ 1,000≈ 101.325 kPa
29.92 inHg to hPa29.92 × 3,386.38864 ÷ 100≈ 1,013.21 hPa
2.5 kgf/cm² to bar2.5 × 98,066.5 ÷ 100,000≈ 2.45166 bar
10 MPa to psi10 × 1,000,000 ÷ 6,894.757293≈ 1,450.38 psi
1013.25 hPa to inHg1013.25 × 100 ÷ 3,386.38864≈ 29.9213 inHg

How to convert a pressure from one unit to another

  1. Type the pressure. Enter the number in the Pressure box, for example 32. Thousands commas, a decimal comma, a minus sign and exponents such as 2.5e5 are read.
  2. Choose the two units. Pick the unit you have under From and the unit you want under To. The example converts 32 psi to bar. Swap units reverses the direction and keeps the number.
  3. Read the answer and the list. The result appears at once: 32 psi ≈ 2.20632 bar. Below it the same pressure is shown in every other unit, and the working shows the two pascal factors it used.
  4. Set the rounding. Results are rounded to 6 significant digits by default. Choose 3 to 12 digits, or all digits, to match your source: ≈ 2.21 bar at 3 digits, ≈ 2.206322334 bar at 10.
  5. Do it by hand. Multiply by the pascals in the “from” unit and divide by the pascals in the “to” unit: 32 × 6,894.757293 ÷ 100,000 ≈ 2.20632 bar.

Frequently asked questions

How do you convert psi to bar?
Multiply the psi value by 0.06894757293. For 32 psi that is about 2.20632 bar. The factor comes from 1 psi ≈ 6,894.75729317 Pa and 1 bar = 100,000 Pa, so 1 psi ≈ 0.06894757293 bar. To go back, multiply bar by 14.50377377.
How many psi are in a bar?
1 bar ≈ 14.5038 psi, and 1 bar ≈ 14.50377377 psi to ten digits. Two bar is about 29.0075 psi and ten bar is about 145.038 psi. In the other direction 1 psi ≈ 0.0689476 bar, or 6.89476 kPa.
How do I convert kPa to psi?
Multiply kilopascals by 0.1450377377: 1 kPa ≈ 0.145038 psi. For example 220 kPa is about 31.9083 psi and 101.325 kPa is about 14.6959 psi, which is one standard atmosphere. Going the other way, 1 psi ≈ 6.89476 kPa.
How many pascals, bar and psi are in one atmosphere?
One standard atmosphere is exactly 101,325 Pa by definition. That is 101.325 kPa, 1.01325 bar, 1,013.25 hPa, about 14.6959 psi, 760 torr and about 29.9213 inHg.
What is the difference between bar and atm?
They are close but not equal. A bar is exactly 100,000 Pa and an atmosphere is exactly 101,325 Pa, so 1 atm = 1.01325 bar and 1 bar ≈ 0.986923 atm. The atmosphere is 1.3% larger, which matters in a gas-law calculation but not when reading a tire gauge.
Are torr and mmHg the same?
Almost. The torr is defined as 1/760 of a standard atmosphere, ≈ 133.322368421053 Pa, while this converter’s mmHg is the conventional millimeter of mercury, exactly 133.322387415 Pa. They differ by about 0.000014%, so 1 atm is exactly 760 torr but about 759.99989 mmHg.
Which definition of mmHg and inHg does the converter use?
The conventional ones: a column of mercury of density 13,595.1 kg/m³ under standard gravity 9.80665 m/s². That gives 1 mmHg = 133.322387415 Pa and 1 inHg (25.4 mmHg) = 3,386.388640341 Pa, both exact. Real mercury barometers vary with temperature and local gravity, so a reading quoted “at 0 °C” or “at 32 °F” can differ slightly from the conventional value; if your source says it uses a different mercury density or temperature, expect a small difference from the numbers here. For reference, 29.92 inHg is about 1,013.21 hPa here.
Is a millibar the same as a hectopascal?
Yes. A millibar is a thousandth of a bar, exactly 100 Pa, and a hectopascal is 100 Pa, so 1 mbar = 1 hPa. Weather maps use either name for the same number: 1 atm is standard sea-level pressure, 1013.25 hPa or 1013.25 mbar. In kPa the same pressure is 101.325 kPa.
What is kgf/cm² and how does it relate to bar?
A kilogram-force per square centimeter is the pressure of a 1 kg-force (9.80665 N) spread over 1 cm², exactly 98,066.5 Pa. It is also called the technical atmosphere. 1 kgf/cm² = 0.980665 bar, so the technical atmosphere is 1.9% smaller than the bar: 1 kgf/cm² ≈ 14.2233 psi, and 2.5 kgf/cm² is about 2.45166 bar.
How exactly is the psi defined?
A pound-force is the force of one avoirdupois pound (exactly 0.45359237 kg) under standard gravity (exactly 9.80665 m/s²), which is 4.4482216152605 N. An inch is exactly 0.0254 m. Dividing, 1 psi = 4.4482216152605 N ÷ 0.00064516 m² ≈ 6,894.75729316836 Pa, and the converter keeps all of it as a fraction.
Does the converter handle gauge and absolute pressure?
It converts the number you type and nothing else, so psig and psia are both just psi to it. Gauge pressure is measured from the surrounding air and absolute pressure from a vacuum, so absolute = gauge + the local atmospheric pressure. Convert the gauge reading first and add the atmosphere in the same unit afterwards: a standard atmosphere is about 14.6959 psi or 1.01325 bar, though the real air pressure at your site varies with weather and altitude.
Can I enter negative or very large pressures?
Yes. A negative value is fine for a gauge reading below atmospheric pressure: −14.7 psi is about −101.353 kPa. Exponent form is read too: 2.5e5 Pa is 2.5 bar and 1e-3 Pa is 0.00001 mbar. Very large and very small results switch to scientific notation, such as about 9.86923 × 10⁻⁶ atm for one pascal.
How many digits of the answer can I trust?
All of them, up to the rounding you chose. The factors are exact and the arithmetic uses whole-number fractions, so the only rounding is the last step. A leading ≈ means the shown digits are a rounding of a longer value, as in 32 psi ≈ 2.20632 bar; no sign means the shown value is exact. Your input is the limit in practice: a gauge reading of 32 psi is not known to 10 digits however many the converter prints.

How it works

Every unit is held as an exact fraction of a pascal built from its definition with BigInt arithmetic, never as a floating-point number. A conversion is value × (pascals per input unit) ÷ (pascals per output unit), computed as one exact fraction and rounded once, half away from zero, to the number of significant digits chosen (or written in full when the result ends in decimal, else 15 digits). A leading ≈ marks a rounded result. The factors: pascal 1; kilopascal 1,000; megapascal 1,000,000; bar 100,000; millibar 100; hectopascal 100; standard atmosphere 101,325; torr 101,325 ÷ 760; pound-force per square inch = 0.45359237 kg × 9.80665 m/s² ÷ (0.0254 m)²; conventional millimeter of mercury = 13,595.1 kg/m³ × 9.80665 m/s² × 0.001 m = 133.322387415 Pa; conventional inch of mercury = 25.4 mmHg; kilogram-force per square centimeter = 9.80665 N ÷ 0.0001 m² = 98,066.5 Pa. Input accepts digits with thousands commas or a decimal comma, a sign, and a power of ten up to ±30 (2.5e5). The tool converts the number you type; it does not know whether a reading is gauge or absolute and does not correct for temperature or altitude.

Sources

  • NIST Special Publication 811, Guide for the Use of the International System of Units (SI): conversion factors for pressure units
  • BIPM, The International System of Units (SI Brochure): the bar and the conventional millimeter of mercury among non-SI units accepted for use with the SI
  • 10th General Conference on Weights and Measures (1954): definition of the standard atmosphere, 101,325 Pa

All convertersAll toolsHome & DIY calculators