Skip to main content
ponderloop

Hours Calculator

Adding 8:30, 7:45, 8:15, 7:30, 6h 20m and 1.5 hours, then taking off a 0:30 break, gives 39:20, which is ≈ 39.33 decimal hours (2,360 minutes, or 1 day, 15 hours, 20 minutes). To add hours and minutes by hand, add the minutes and the hours separately and carry every 60 minutes into one hour. Multiplying works the same way once the duration is in minutes: 7:30 × 5 = 37:30, or 37.5 hours. This tool adds and subtracts lengths of time; to add hours to a clock time use the time calculator, and for start and end times use the timesheet calculator.

Updated Runs in your browser: nothing you enter is uploadedHow this tool works

One duration per line: 7:45, 2h 30m, 90m or 1.5 (a plain number is hours). Put - in front of a line to subtract it. 1:30 is one and a half hours; 1.30 is 1.3 hours.

8:30 + 7:45 + 8:15 + 7:30 + 6:20 + 1:30 − 0:30 = 39:20

Total 39:20

≈ 39.33 decimal hours, 2,360 minutes (1 day, 15 hours, 20 minutes)

Hours and minutes (h:mm)
39:20
Decimal hours
≈ 39.33
Total minutes
2,360
Days and hours
1 day, 15 hours, 20 minutes
Entries counted
7

The working

  1. Write each entry in minutes: 8:30 = 510 min, 7:45 = 465 min, 8:15 = 495 min, 7:30 = 450 min, 6h 20m = 380 min, 1.5 = 90 min, 0:30 = 30 min.
  2. Add them, taking off the entries that follow a minus sign: 2,360 minutes in all.
  3. Divide by 60: 2,360 ÷ 60 is 39 with 20 left over, so 39 hours 20 minutes, written 39:20.
  4. Decimal hours: 2,360 ÷ 60 ≈ 39.33.

Each entry

#EntryCounts asRunning total
18:30+8:308:30
27:45+7:4516:15
38:15+8:1524:30
47:30+7:3032:00
56h 20m+6:2038:20
61.5+1:3039:50
70:30−0:3039:20

Minutes to decimal hours

Decimal hours = minutes ÷ 60, rounded to 2 decimal places. Every minute from 1 to 60 is listed, as two blocks side by side.
MinutesDecimal hoursMinutesDecimal hours
10.02310.52
20.03320.53
30.05330.55
40.07340.57
50.08350.58
60.1360.6
70.12370.62
80.13380.63
90.15390.65
100.17400.67
110.18410.68
120.2420.7
130.22430.72
140.23440.73
150.25450.75
160.27460.77
170.28470.78
180.3480.8
190.32490.82
200.33500.83
210.35510.85
220.37520.87
230.38530.88
240.4540.9
250.42550.92
260.43560.93
270.45570.95
280.47580.97
290.48590.98
300.5601

Common weekly totals and the daily hours behind them

Each row is the calculator’s own answer. A ≈ marks a daily figure that is not a whole number of minutes and has been rounded to the nearest minute.
Hours per week (h:mm)Decimal hoursMinutes per weekPer day, 5 daysPer day, 4 days
20:00201,2004:005:00
24:00241,4404:486:00
30:00301,8006:007:30
32:00321,9206:248:00
35:00352,1007:008:45
37:3037.52,2507:30≈ 9:23
40:00402,4008:0010:00
44:00442,6408:4811:00
45:00452,7009:0011:15
48:00482,8809:3612:00
50:00503,00010:0012:30
60:00603,60012:0015:00

Multiply and divide examples

Each row is the calculator’s own answer in the multiply or divide mode. A ≈ marks a result that is not a whole number of minutes and has been rounded to the nearest minute.
CalculationResult (h:mm)Decimal hoursMinutes
7:30 × 537:3037.52,250
8:15 × 541:1541.252,475
0:45 × 129:009540
1:20 × 34:004240
6:40 × 640:00402,400
40:00 ÷ 58:008480
37:30 ÷ 57:307.5450
10:00 ÷ 33:20≈ 3.33200
1:00 ÷ 7≈ 0:090.15≈ 9

Time formats the hours calculator reads

Type any of these on a line of its own. Each row shows what the calculator makes of it.
You typeRead as (h:mm)Decimal hoursNotes
7:457:457.75Hours and minutes
0:450:450.75Under an hour
:450:450.75Minutes only, with the colon
7.757:457.75Decimal hours: a plain number is hours
7.75h7:457.75Decimal hours with a unit
7h 45m7:457.75Hours and minutes with units
7 hrs 45 mins7:457.75Units can be spelled out
1 hour and 15 minutes1:151.25The word “and” is allowed
1h301:301.5Hours then minutes with no second unit
90m1:301.5Minutes
1d 2h26:0026Days count as 24 hours
1.301:181.3A decimal: 1.3 hours, not 1:30
1:301:301.5One hour and 30 minutes
-0:30−0:30−0.5A minus sign subtracts the entry

Hours worked between a start and an end time, minus an unpaid break

Each row subtracts the start from the end as durations (for example 17:45 − 8:15) and then takes off the unpaid break, using the calculator’s own sum. The clock times are examples, on a 24-hour clock within one day. A shift that crosses midnight is not covered by this subtraction.
Start to endUnpaid breakHours worked (h:mm)Decimal hoursMinutes
8:15 to 17:450:309:009540
9:00 to 17:000:307:307.5450
7:00 to 15:300:457:457.75465
8:00 to 16:301:007:307.5450
6:30 to 14:450:158:008480
10:00 to 18:300:308:008480
9:15 to 17:200:457:20≈ 7.33440
7:45 to 12:15None4:304.5270

Weekly hours from daily totals, against a 40-hour week

Each row adds the daily durations listed and compares the total with 40:00. A minus sign means the week is short of 40 hours. The days are examples, not a pay rule: how overtime is counted depends on your employer and your location.
WeekDaily hoursWeek total (h:mm)Decimal hoursAgainst 40:00
Five 8-hour days8:00, 8:00, 8:00, 8:00, 8:0040:00400:00
A week of 7:30 to 8:15 days7:45, 8:00, 8:15, 7:30, 7:3039:0039−1:00
A long week9:30, 8:45, 8:15, 9:00, 7:3043:00433:00
Three full days and a half day8:30, 8:30, 8:30, 4:0029:3029.5−10:30
Six uneven days6:15, 7:20, 5:50, 8:05, 7:40, 3:3038:40≈ 38.67−1:20

Decimal hours to hours and minutes

A plain number is read as decimal hours: the part after the point is multiplied by 60 to get minutes. Where that does not come to a whole number of minutes, the calculator rounds to the nearest minute, as the last column says.
You typeHours and minutesMinutesWhole minutes?
0.10:066Exact
0.250:1515Exact
0.330:2020Rounded to the nearest minute
0.50:3030Exact
0.660:4040Rounded to the nearest minute
0.750:4545Exact
1.11:0666Exact
1.251:1575Exact
7.337:20440Rounded to the nearest minute
8.258:15495Exact
8.68:36516Exact
37.537:302,250Exact

Long totals in days and hours

Durations do not wrap at 24 hours; the calculator also writes a long total as days and hours, taking a day as 24 hours.
Total (h:mm)Days and hoursMinutes
24:001 day1,440
36:001 day, 12 hours2,160
48:002 days2,880
100:004 days, 4 hours6,000
168:007 days10,080
720:0030 days43,200
2080:0086 days, 16 hours124,800

How to add hours and minutes

  1. Write every duration as hours:minutes. Put each length of time in the form h:mm, for example 7:45, 8:30, 6:20. A decimal such as 8.25 hours is 8 hours and 15 minutes (8:15), because 0.25 × 60 = 15.
  2. Add the minutes and carry. Add the minutes column: 45 + 30 + 20 = 95. Every 60 minutes makes one hour, so 95 minutes is 1 hour and 35 minutes: write 35 and carry 1 hour.
  3. Add the hours. Add the hours column and the carried hour: 7 + 8 + 6 + 1 = 22. The total is 22:35.
  4. Subtract a break or an earlier total. To take off 0:45, subtract the minutes, borrowing an hour (60 minutes) if you need to: 22:35 − 0:45 = 21:50. In the calculator, put a minus sign in front of the line.
  5. Convert to decimal hours if you need to. Divide the total minutes by 60: 1,310 ÷ 60 ≈ 21.83 hours. Payroll systems usually want this form.

Frequently asked questions

How do you add hours and minutes?
Add the minutes together and the hours together, then carry: every 60 minutes becomes one more hour. For 7:45 + 8:30 + 6:20, the minutes are 45 + 30 + 20 = 95, which is 1 hour and 35 minutes, and the hours are 7 + 8 + 6 + 1 carried = 22, so the total is 22:35. In the calculator, type one duration per line (or 7:45 + 8:30 on one line) and read the total.
How do I convert hours and minutes to decimal hours?
Divide the minutes by 60 and add the result to the hours. 7:20 is 7 + 20 ÷ 60 ≈ 7.33 hours, and 0:15 = 0.25, 0:30 = 0.5, 0:45 = 0.75. The calculator shows the decimal form of every total, with a ≈ when it is rounded, and lets you choose from 1 to 4 decimal places.
Why is 1:30 not the same as 1.30?
A colon separates hours from minutes, a point starts a decimal. 1:30 is one hour and 30 minutes, which is 1.5 hours. 1.30 is 1.3 hours, which is 1:18 (78 minutes). The calculator reads a plain number as decimal hours, so type 1:30 or 1h 30m for an hour and a half, or 1.5.
How do I subtract hours and minutes?
Put a minus sign in front of the line you want to take off, or write it between two durations with spaces: 9:15 - 2:40. By hand, subtract the minutes first and borrow an hour (60 minutes) when the top number is smaller: 15 is less than 40, so 9:15 becomes 8 hours and 75 minutes, and 75 − 40 = 35 minutes, 8 − 2 = 6 hours. The result is 6:35 (395 minutes). A total below zero is shown with a minus sign.
What if the total is more than 24 hours?
Durations do not wrap at 24 hours. 12:00, 13:30 and 10:00 add up to 35:30, which the calculator also writes as 1 day, 11 hours, 30 minutes. A duration is a length of time, not a time of day, so there is no midnight to cross; 8:00 + 8:00 + 8:00 = 24:00 is simply three 8-hour days. To work out how long an overnight shift lasted from its start and end times, or the clock time that is a number of hours from now, use the timesheet calculator or the time calculator.
How do I multiply or divide hours and minutes?
Turn the duration into minutes, multiply or divide, and turn the result back into hours and minutes. 7:30 is 450 minutes, and × 5 is 2,250 minutes, which is 37:30. Choose “Multiply or divide a duration” in the calculator: 8:15 × 2.5 = 20:38, and 40:00 ÷ 5 = 8:00. A result that is not a whole number of minutes is rounded to the nearest minute and the page says so.
How do I work out hours worked per week?
Enter each day’s hours on its own line and, if breaks are unpaid, the break with a minus sign. For 7:45 + 8:00 + 8:15 + 7:30 + 7:30, the week is 39:00, 39 decimal hours. A 40-hour week is 2,400 minutes and 8:00 a day over five days. If you have start and end times instead of lengths, the timesheet calculator does that subtraction for you.
How do I convert decimal hours to minutes?
Multiply the decimal part by 60. 0.25 hours is 15 minutes, 0.5 is 30 and 0.75 is 45; tenths of an hour are 0.1 = 6 min, 0.2 = 12 min, 0.3 = 18 min. Type a decimal such as 8.25 on a line and the calculator shows it as 8:15. A decimal that does not come to a whole number of minutes, such as 7.33 hours (7.33 × 60 = 439.8 minutes), is rounded to the nearest minute and shown as 7:20.
How many hours are there between 8:15 and 17:45, minus a lunch break?
Subtract the start from the end and then the break, as durations: 17:45 − 8:15 is 9:30, and taking off a 0:30 lunch leaves 9:00, which is 9 decimal hours. In the calculator, type 17:45, then -8:15 and -0:30 on separate lines. Times are read on a 24-hour clock, so write 5:45 pm as 17:45, and a shift that runs past midnight needs a different approach because the end is earlier than the start.
How many hours over 40 did I work this week?
Add the days, then subtract 40:00. For 9:30, 8:45, 8:15, 9:00, 7:30 the week is 43:00 and 43:00 − 40:00 is 3:00. A negative answer means you are short of 40 hours. Whether hours above 40 count as overtime, and what they pay, depends on your employer, your contract and your location, so this only gives the arithmetic.
How do I add up two weeks of hours?
Add the two weekly totals the same way as days: 39:00 and 43:00 make 82:00 (82 decimal hours). Type each daily or weekly total on its own line, up to 1,000 lines, and the total does not wrap at 24 hours or at 40.
How many hours is a full-time year?
At 40 hours a week for 52 weeks, 40:00 × 52 = 2,080:00, or 2,080 hours, which is 86 days, 16 hours. That ignores holidays, leave and any weeks that are not worked, so your own count will be lower.
How is this different from the time calculator and the timesheet calculator?
This one adds up lengths of time you already have, such as 7:45 or 2h 30m, and multiplies or divides them. The time calculator starts from a date and clock time (what time is it 72 hours from now?) and handles daylight saving. The timesheet calculator starts from clock times (a shift from 9:00 to 17:30 with a break) and works out the hours for each day and the week, with optional pay and overtime. A range such as 9:00-17:30 is not a duration, so this calculator tells you to use the timesheet calculator for it.
Does it handle seconds, or round to the nearest quarter hour?
No to both. Every total is a whole number of minutes, and seconds such as 1:30:15 are not read. The calculator does not round the total to 5, 6 or 15 minutes either, because pay-rounding rules differ between employers; the timesheet calculator has rounding options for that. Only the decimal-hours display is rounded, to the number of places you choose.
Is anything I type sent anywhere?
No. The durations are worked out in your browser and are not sent anywhere.

How it works

Each entry is read as an exact decimal count of minutes, never as a binary float: 1.1 hours is 66 minutes, not 66.00000000000001. h:mm means hours × 60 + minutes with the minutes from 0 to 59; a plain number or a number with h is decimal hours (× 60); units give days × 1,440, hours × 60 and minutes × 1, and a part may be a decimal (1.5h 10m is 100 minutes). A decimal entry is rounded half up to a whole minute, and the calculator says how many were. A leading + or − sets the sign of an entry; entries on one line can be separated by a comma, a plus sign or a minus sign with a space before it, and a hyphen glued to a number (9:00-17:30) is treated as a start–end range and reported, not subtracted. The total is the integer sum of the signed minutes. Hours and minutes are the size of the total divided by 60, as whole hours and a remainder, with the minus sign put back when the total is negative; days and hours divide the same size by 1,440 minutes. Decimal hours = total minutes ÷ 60, computed with integer arithmetic and rounded half up to the places you choose (1 to 4); a ≈ means the figure was rounded. In multiply and divide mode the duration stays an exact decimal and the product (or quotient) is rounded to a whole minute once, at the end: 6:40 × 6 gives 40:00. The conversions rest on 1 hour = 60 minutes and 1 day = 24 hours. Up to 1,000 entries are used and the table lists the first 100. The tables on this page call these same functions when the page is built. The start-and-end table subtracts the start time from the end time as durations and then the unpaid break, which is correct inside one day on a 24-hour clock; the weekly table adds each day and subtracts 40:00; and the decimal-hours table shows where a decimal is rounded to the nearest minute. Everything runs in your browser and nothing you type is sent anywhere.

Sources

Guides

All dates & timeAll toolsHome & DIY calculators