How to Add and Subtract Time: Hours, Minutes and Decimals
Add hours and minutes by carrying 60, subtract by borrowing 60, handle midnight, and turn 7:45 into 7.75 decimal hours. Worked examples and rounding.
2:45 plus 3:50 is 6:35: add the minutes (45 + 50 = 95), carry 60 of them into one hour, and add the hours (2 + 3 + 1). Subtraction is the same idea in reverse, borrowing 60 minutes when the top minutes are smaller. The only real difference from ordinary arithmetic is that minutes roll over at 60, not 100, which is also why 7:45 is 7.75 hours and not 7.45.
Adding hours and minutes
Add the minutes first. If the total is 60 or more, subtract 60 and add 1 to the hours. Then add the hours.
| Sum | Minutes step | Hours step | Result |
|---|---|---|---|
| 2:45 + 3:50 | 45 + 50 = 95 = 1 h 35 min | 2 + 3 + 1 = 6 | 6:35 |
| 1:40 + 2:35 + 0:50 | 40 + 35 + 50 = 125 = 2 h 5 min | 1 + 2 + 0 + 2 = 5 | 5:05 |
To avoid carrying mistakes, convert to minutes: 1:40 + 2:35 + 0:50 is 100 + 155 + 50 = 305 minutes, and 305 ÷ 60 is 5 remainder 5, so 5:05.
Subtracting with borrowing
If the minutes you are taking away are larger than the minutes you start with, borrow one hour and add 60 to the minutes.
9:15 − 4:40. The minutes do not work (15 is less than 40), so borrow: 9:15 becomes 8 h 75 min. Then 75 − 40 = 35 and 8 − 4 = 4, giving 4:35. In minutes it is 555 − 280 = 275, which is 4:35.
A shift that crosses midnight
A start of 22:30 and an end of 06:15 looks like a negative number, because 6:15 is smaller than 22:30. Add 24 hours to the end time first: 06:15 becomes 30:15, and 30:15 − 22:30 = 7:45.
Adding to a clock time works the same way: 22:30 plus 3:00 is 25:30, which is 1:30 on the next day. The time-between-times calculator applies this rule for you when the end time is earlier than the start.
Totalling a week of shifts
Compute each shift as end minus start, take off the unpaid break, then add the days. This example assumes a 30-minute unpaid break on every shift, and the Friday shift runs overnight into Saturday.
| Day | Start | End | Elapsed | Worked (less 0:30) | Decimal hours |
|---|---|---|---|---|---|
| Mon | 08:57 | 17:12 | 8:15 | 7:45 | 7.75 |
| Tue | 09:03 | 17:48 | 8:45 | 8:15 | 8.25 |
| Wed | 08:52 | 16:37 | 7:45 | 7:15 | 7.25 |
| Thu | 09:10 | 17:34 | 8:24 | 7:54 | 7.90 |
| Fri | 22:15 | 06:40 | 8:25 | 7:55 | 7.9167 |
| Total | 39:04 | 39.0667 |
In minutes, 465 + 495 + 435 + 474 + 475 = 2,344, and 2,344 ÷ 60 is 39 remainder 4. The total is 39 hours 4 minutes, not 39.04 hours. A frequent mistake is typing each shift as 7.45, 8.15 and so on and adding them like decimals: that gives 37.84, which is more than an hour short. The hours calculator totals durations like these in one go, and a timesheet calculator lays out a full week with breaks.
Minutes to decimal hours
Payroll and invoicing usually need hours as a decimal. Divide the minutes by 60.
| Minutes | Decimal hours |
|---|---|
| 5 | 0.0833 |
| 10 | 0.1667 |
| 15 | 0.25 |
| 20 | 0.3333 |
| 30 | 0.5 |
| 45 | 0.75 |
So 7:45 is 7 + 45 ÷ 60 = 7.75 hours. The trap is reading the digits after the colon as the decimal part. 7.45 hours is 7 hours and 0.45 × 60 = 27 minutes, which is 7:27. Going the other way, 125 minutes is 2:05, or 125 ÷ 60 = 2.0833 hours. Five, 10 and 20 minutes do not convert cleanly, so keep four decimals until the final step. The decimal hours converter goes in both directions.
Rounding to the nearest 5, 6 or 15 minutes
Some timekeeping systems round each shift to a fixed step: 5 minutes, 6 minutes (a tenth of an hour, so durations come out as clean decimals like 7.8) or 15 minutes. The step is a policy choice of the system in use. This example rounds each shift’s worked time to the nearest step, halfway points up, using the week above.
| Day | Exact | Nearest 5 | Nearest 6 | Nearest 15 |
|---|---|---|---|---|
| Mon | 7:45 | 7:45 | 7:48 | 7:45 |
| Tue | 8:15 | 8:15 | 8:18 | 8:15 |
| Wed | 7:15 | 7:15 | 7:18 | 7:15 |
| Thu | 7:54 | 7:55 | 7:54 | 8:00 |
| Fri | 7:55 | 7:55 | 7:54 | 8:00 |
| Week | 39:04 | 39:05 | 39:12 | 39:15 |
Tuesday shows the halfway rule: 495 minutes is 82.5 tenths of an hour, so it rounds up to 83 tenths, or 8:18. At an example rate of $20.00 an hour, the exact week is $781.33, rounding to 5 minutes gives $781.67, to 6 minutes $784.00 and to 15 minutes $785.00. Rounding each clock-in and clock-out instead of each shift’s length gives different totals again, so compare like with like.
What a time and date calculator adds
A clock-time calculator works on durations and times of day, and it knows nothing about calendars. A date calculator also moves across days, weeks, months and years.
| Question | Answer |
|---|---|
| 36 hours is how many days? | 1 day 12 hours |
| 8 November 2026 plus 45 days | Wednesday 23 December 2026 |
| 8 November 2026 plus 6 weeks | Sunday 20 December 2026 |
| 8 November 2026 to 1 January 2027 | 54 days (7 weeks 5 days) |
To add days or weeks to a date, use the add days to date calculator, and to count the days between two dates, use the days between dates calculator. For hours and minutes, the time calculator handles the carrying shown above.
One limit applies to every clock-time method here: they assume each hour is 60 minutes on a fixed clock. If daylight saving time starts or ends during a shift, elapsed time differs from the clock difference. A 22:00 to 06:00 shift on the night of 31 October to 1 November 2026 in New York spans 9 hours, not 8, because the clocks go back one hour.
Quick checks
- Minutes above 59 in an answer mean you forgot to carry.
- Never add hh.mm values as decimals.
- Keep exact minutes through the whole week and round once, at the end, unless a rule says otherwise.
Every figure here was reproduced in Python with whole minutes, exact fractions, datetime and zoneinfo.
For whole days, weeks and months between two dates, see how to calculate the days between two dates.
Updated 2026-11-08