Skip to main content
ponderloop

Decimal Hours Converter

7:45 is 7.75 hours: 45 minutes is 0.75 hours, because 465 minutes ÷ 60 = 7.75 hours. To go back, multiply the decimal part by 60: 0.1 hours is 0:06 (a tenth of an hour is 6 minutes) and 0.25 hours is 0:15. Pick a payroll increment (the nearest 15, 6 or 5 minutes) to see how rounding moves a time and by how much; the working is shown under the result.

Updated Runs in your browser: nothing you enter is uploadedHow this tool works

Type hours and minutes as 7:45 or 7h 45m. Minutes run from 00 to 59; hours can be any size, such as 37:30.

7:45 = 7.75 hours

465 minutes ÷ 60 = 7.75 hours.

Decimal hours
7.75
Hours and minutes
7:45
Total minutes
465
Exact fraction of an hour
31/4

The working

  1. 7:45 is 7 hours and 45 minutes: 7 × 60 + 45 = 465 minutes.
  2. Decimal hours are minutes ÷ 60: 465 ÷ 60 = 7.75 hours.

Minutes to decimal hours, 1 to 60 minutes

Every minute of an hour as a decimal, rounded half up to two places, with the exact fraction of an hour.
MinutesDecimal hoursExact fraction of an hour
10.021/60
20.031/30
30.051/20
40.071/15
50.081/12
60.101/10
70.127/60
80.132/15
90.153/20
100.171/6
110.1811/60
120.201/5
130.2213/60
140.237/30
150.251/4
160.274/15
170.2817/60
180.303/10
190.3219/60
200.331/3
210.357/20
220.3711/30
230.3823/60
240.402/5
250.425/12
260.4313/30
270.459/20
280.477/15
290.4829/60
300.501/2
310.5231/60
320.538/15
330.5511/20
340.5717/30
350.587/12
360.603/5
370.6237/60
380.6319/30
390.6513/20
400.672/3
410.6841/60
420.707/10
430.7243/60
440.7311/15
450.753/4
460.7723/30
470.7847/60
480.804/5
490.8249/60
500.835/6
510.8517/20
520.8713/15
530.8853/60
540.909/10
550.9211/12
560.9314/15
570.9519/20
580.9729/30
590.9859/60
601.001

Hours and minutes to decimal hours, common times

Each row is the converter’s own answer for the time in the first column.
Hours:minutesTotal minutesDecimal hours
0:1010≈ 0.17
0:2020≈ 0.33
0:45450.75
1:30901.50
6:50410≈ 6.83
7:454657.75
8:20500≈ 8.33
37:302,25037.50
40:002,40040.00

Payroll rounding table: nearest quarter hour (15 minutes)

Minutes past the hour on a time, and the mark each rounds to (the nearest 15 minutes (a quarter hour)). A tie rounds up. 60 means the next whole hour.
Minutes past the hourRounds to (minutes)Decimal hours added
0–700.00
8–22150.25
23–37300.50
38–52450.75
53–59601.00

Payroll rounding table: nearest tenth of an hour (6 minutes)

Minutes past the hour on a time, and the mark each rounds to (the nearest 6 minutes (a tenth of an hour)). A tie rounds up. 60 means the next whole hour.
Minutes past the hourRounds to (minutes)Decimal hours added
0–200.00
3–860.10
9–14120.20
15–20180.30
21–26240.40
27–32300.50
33–38360.60
39–44420.70
45–50480.80
51–56540.90
57–59601.00

Payroll rounding table: nearest 5 minutes

Minutes past the hour on a time, and the mark each rounds to (the nearest 5 minutes). A tie rounds up. 60 means the next whole hour.
Minutes past the hourRounds to (minutes)Decimal hours added
0–200.00
3–750.08
8–12100.17
13–17150.25
18–22200.33
23–27250.42
28–32300.50
33–37350.58
38–42400.67
43–47450.75
48–52500.83
53–57550.92
58–59601.00

How rounding changes a sample week

Five sample shift lengths. Each shift is rounded on its own; the last row is the total of the five. Unrounded, the week is 40:02.
ShiftExactNearest 15 minNearest 6 minNearest 5 min
7:527.877:45 (7.75)7:54 (7.90)7:50 (7.83)
8:078.128:00 (8.00)8:06 (8.10)8:05 (8.08)
7:587.978:00 (8.00)8:00 (8.00)8:00 (8.00)
8:218.358:15 (8.25)8:24 (8.40)8:20 (8.33)
7:447.737:45 (7.75)7:42 (7.70)7:45 (7.75)
Week40:02 (40.03)39:45 (39.75)40:06 (40.10)40:00 (40.00)

How to convert hours and minutes to decimal hours

  1. Turn the time into minutes. Multiply the hours by 60 and add the minutes. 7:45 is 7 hours and 45 minutes: 7 × 60 + 45 = 465 minutes.
  2. Divide by 60. Decimal hours are total minutes ÷ 60. 465 ÷ 60 = 7.75.
  3. Go the other way by multiplying by 60. To convert decimal hours back, keep the whole hours and multiply the decimal part by 60: Minutes are decimal hours × 60: 0.25 × 60 = 15 minutes.
  4. Round to your payroll increment if you need to. Divide the minutes by the increment, round to the nearest whole number and multiply back: 7:53 is 7 hours and 53 minutes: 7 × 60 + 53 = 473 minutes.

Frequently asked questions

Why is 1:30 equal to 1.5 and not 1.30?
Because the part after the colon counts minutes, out of 60, while the part after a decimal point counts tenths and hundredths, out of 10 and 100. Thirty minutes is half of an hour, 30 ÷ 60 = 0.50, so 1:30 is 1.50 hours. Writing 1.30 would mean one hour and thirty hundredths of an hour, which is 1:18.
How do I convert hours and minutes to decimal hours?
Divide the minutes by 60 and add the result to the hours. For 7:45: 45 ÷ 60 = 0.75, and 7 + 0.75 = 7.75. The converter does the same for any size of time: 37:30 is 37.50 hours.
How do I convert decimal hours to hours and minutes?
Keep the whole hours and multiply the decimal part by 60. 0.25 hours is 0:15 (0.25 × 60 = 15 minutes), and 0.1 hours is 0:06. If the minutes do not come out whole, the converter shows the exact minutes and rounds the hours and minutes to the nearest minute.
Is 7.30 hours the same as 7:30?
No, and it is a common mistake on time cards. 7:30 is 7.50 hours, while 7.3 hours is 7:18 (0.30 × 60 = 438 minutes). Check whether a total is written in hours:minutes or in decimal hours before you add it to anything.
Why does 20 minutes show as 0.33 hours?
Twenty minutes is exactly 1/3 of an hour, and one third has no ending as a decimal. At two places it is ≈ 0.33 and at four it is ≈ 0.3333. The converter rounds half up to the places you choose and marks the result with ≈ when it was cut off. How many places to keep is a choice of your payroll system, since the more you keep the smaller the rounding difference.
How does payroll rounding work?
A time is moved to the nearest multiple of an increment. At a quarter hour (15 minutes) 7:53 rounds to 8:00 = 8.00 hours, and 8:07 rounds to 8:00 = 8.00 hours. At a tenth of an hour (6 minutes) 7:50 rounds to 7:48 = 7.80 hours. At 5 minutes 7:23 rounds to 7:25 ≈ 7.42 hours. The converter also shows the change: +7 min (+0.12 h) for the first of those. The sample week table above shows the effect over five shifts: 40:02 unrounded, 39:45 at 15 minutes, 40:06 at 6 minutes and 40:00 at 5 minutes. Which increment your employer uses, and whether rounding is allowed at all, depends on its policy and the law where you work; this page only does the arithmetic.
How much can rounding change a time?
At most half an increment, since a time is moved to the nearest mark. For whole minutes, a time can move down by at most 7 minutes and up by at most 7 minutes at 15 minutes, down 2 and up 3 at 6 minutes, and down 2 and up 2 at 5 minutes. A tie rounds up, which is why 6-minute rounding can add 3 minutes but only remove 2. The ups and downs partly offset over many shifts, but they do not have to cancel.
What if the minutes are 60 or more, or the hours are more than 24?
Hours can be any size, so 37:30 is 37.50 hours. In h:mm the minutes must be 00 to 59; typing 1:75 gives “In h:mm the minutes run from 00 to 59, so “1:75” is not a time. 1 hours and 75 minutes is 2:15.” To convert a number of minutes of any size, use the minutes setting.
How is this different from the timesheet calculator and the time calculator?
This page converts one length of time between h:mm, minutes and decimal hours, shows the whole 1 to 60 minute table and explains payroll rounding step by step. The timesheet calculator works out hours from start and end times, breaks and overtime across a week, and the time calculator adds or subtracts hours and minutes from dates and clock times.
Is anything I type sent anywhere?
No. The value is used only in your browser to work out the result and is not sent anywhere.

How it works

An hour has 60 minutes, so decimal hours = minutes ÷ 60 and minutes = decimal hours × 60. The value you type is read exactly: h:mm and minutes as whole numbers, decimal hours and decimal minutes as a numerator over a power of ten, never as a binary float. A duration is held as a reduced fraction of minutes in BigInt, so 0.1 hour is exactly 6 minutes and 20 minutes is exactly 1/3 of an hour. Decimal hours are shown rounded half up to 2, 3 or 4 places, with ≈ when the decimal does not end at that many places. Hours and minutes are rounded to the nearest whole minute when the minutes are not whole. Payroll rounding moves the total minutes to the nearest multiple of 15, 6 or 5 (a quarter hour, a tenth of an hour, or 5 minutes), a tie going up, and shows the rounded time, its decimal hours and the change. This page does not say whether or how an employer may round time; that depends on company policy and the law where you work. The value is used only in your browser.

Sources

Guides

All dates & timeAll toolsHome & DIY calculators