Shoe Size Conversion Guide: US, UK and EU Sizes Explained
Why US, UK and EU shoe sizes differ: a barleycorn is 1/3 inch, a Paris point is 2/3 cm. Measure your foot, convert it exactly, and why brands vary.
A foot 26 cm long is 10.236 inches, 39 Paris points or 30.709 barleycorns. Those are the two size steps that shoe scales are counted in: UK and US sizes advance by one barleycorn (exactly one third of an inch), and continental European sizes by one Paris point (exactly two thirds of a centimeter). The two steps are different lengths, so there is no single fixed offset that turns one scale into the other. The length conversion is exact, but the number printed on a shoe depends on the brand’s last and allowance, so treat any size you convert as approximate, give or take half a size.
Why the scales differ
Shoe sizes are not measured in a standard length unit. They count steps of a small unit from a starting point chosen by each scale’s tradition, and the steps are not equal:
| Step | Definition | Millimeters | Inches |
|---|---|---|---|
| 1 barleycorn (UK and US size step) | 1/3 inch | 8.4667 | 0.33333 |
| 1/2 barleycorn (half size) | 1/6 inch | 4.2333 | 0.16667 |
| 10 barleycorns | 3 1/3 inches | 84.667 | 3.3333 |
| 1 Paris point (EU size step) | 2/3 cm | 6.6667 | 0.26247 |
| 1/2 Paris point (half size) | 1/3 cm | 3.3333 | 0.13123 |
| 10 Paris points | 6 2/3 cm | 66.667 | 2.6247 |
One barleycorn is exactly 1.27 Paris points (127/100), and one Paris point is 0.7874 of a barleycorn. The scales therefore drift apart as the foot gets longer: across ten UK or US sizes you pass through 12.7 Paris points, 2.7 more than ten EU sizes. A foot 4 cm longer adds 4.72 barleycorns but 6 Paris points. This is why converting by adding a fixed number never stays right across the whole range.
How to measure your foot
Stand on a sheet of paper with your heel against a wall, mark the tip of your longest toe, and measure from the wall to the mark with a ruler. Measure both feet and use the longer one. Record it in centimeters (or millimeters) or in inches. The inch is defined as exactly 2.54 cm, so the conversion between the two is exact: multiply inches by 2.54 for centimeters, or divide centimeters by 2.54 for inches. For a refresher on that step, see the centimeters to inches guide.
Foot length in every unit
The table converts a foot length in centimeters into millimeters, inches, barleycorns and Paris points. A leading ≈ means the value is rounded to 5 significant digits.
| Foot length (cm) | Millimeters | Inches | Barleycorns (UK/US steps) | Paris points (EU steps) |
|---|---|---|---|---|
| 22 | 220 | ≈ 8.6614 | ≈ 25.984 | 33 |
| 23 | 230 | ≈ 9.0551 | ≈ 27.165 | 34.5 |
| 24 | 240 | ≈ 9.4488 | ≈ 28.346 | 36 |
| 25 | 250 | ≈ 9.8425 | ≈ 29.528 | 37.5 |
| 25.5 | 255 | ≈ 10.039 | ≈ 30.118 | 38.25 |
| 26 | 260 | ≈ 10.236 | ≈ 30.709 | 39 |
| 26.5 | 265 | ≈ 10.433 | ≈ 31.299 | 39.75 |
| 27 | 270 | ≈ 10.63 | ≈ 31.89 | 40.5 |
| 28 | 280 | ≈ 11.024 | ≈ 33.071 | 42 |
| 29 | 290 | ≈ 11.417 | ≈ 34.252 | 43.5 |
| 30 | 300 | ≈ 11.811 | ≈ 35.433 | 45 |
Because a Paris point is 2/3 cm, the Paris-point count is simply the length in centimeters times 1.5. Barleycorns are inches times 3, or centimeters times 1.1811. These are foot lengths, not shoe sizes: a shoe is longer than the foot inside it, so the label on the box is usually a different number from the step count of your foot, and by how much depends on the brand.
If your measurement is in inches, this table gives the same values the other way round:
| Foot length (in) | Centimeters | Millimeters | Barleycorns | Paris points |
|---|---|---|---|---|
| 9 | 22.86 | 228.6 | 27 | 34.29 |
| 9.5 | 24.13 | 241.3 | 28.5 | 36.195 |
| 10 | 25.4 | 254 | 30 | 38.1 |
| 10.5 | 26.67 | 266.7 | 31.5 | 40.005 |
| 11 | 27.94 | 279.4 | 33 | 41.91 |
| 11.5 | 29.21 | 292.1 | 34.5 | 43.815 |
Worked examples
Example 1: a 26 cm foot. In inches, 26 ÷ 2.54 = 10.236 (exactly 1300/127). In Paris points, 26 × 1.5 = 39. In barleycorns, 26 ÷ 2.54 × 3 = 30.709.
Example 2: a foot of 10 inches. 10 × 2.54 = 25.4 cm, or 254 mm. That is 30 barleycorns exactly and 38.1 Paris points.
Example 3: a chart that lists 270 mm. Some boxes and charts give a length in millimeters or centimeters rather than a size number, often called a Mondopoint size. It is a foot length, so it converts directly: 270 mm is 10.63 inches, 31.89 barleycorns or 40.5 Paris points.
Why brands still vary
The exact lengths above settle what a step is, not what size a particular shoe carries. A size label also depends on the length the scale starts from and on the allowance a maker builds in beyond the foot, and both differ between brands, lasts, men’s, women’s and children’s scales, countries and eras. So the same foot can be a different label in two brands, and sometimes in two styles from one brand. A half size is only 4.23 mm in UK and US terms and 3.33 mm in EU terms, which is less than the variation you will see between makers.
That is why this guide does not print a chart pairing US, UK and EU numbers. Any such chart would be right for some shoes and wrong for others. Use these steps:
- Measure your longer foot in centimeters or inches.
- Convert it to the unit the brand’s size chart uses.
- Find that length on the brand’s own chart, and choose the nearest size.
- If two sizes are close, check the brand’s fit notes or try both.
Using the converter
The shoe size converter takes a length in millimeters, centimeters, meters, inches or feet and shows it in all those units plus barleycorns and Paris points, using the exact definitions above and rounding only for display. For other lengths, such as room measurements or a height, the general length converter covers the common units.
Every value in this guide was computed with Python’s exact fractions, using the same exact unit definitions as the converter (1 inch = 2.54 cm, 1 barleycorn = 1/3 inch, 1 Paris point = 2/3 cm) and the converter’s rounding rule (5 significant digits, half up). The numbers were copied from the script’s output, not from the converter at runtime.
Updated 2026-11-04