Skip to main content
ponderloop

Surface Area Calculator

The surface area of a cylinder with a radius of 3 cm and a height of 10 cm is ≈ 245.044 cm²: ≈ 188.496 cm² for the curved side plus ≈ 56.5487 cm² for the two circular ends, from A = 2πr(r + h). Pick a cube, rectangular prism, sphere, cylinder, cone, square pyramid, triangular prism or hemisphere, choose mm, cm, m, in, ft or yd, and type the dimensions: the calculator gives the total, lateral and base areas, the formula with your numbers, and the total in square meters, feet, centimeters and inches.

Updated Runs in your browser: nothing you enter is uploadedHow this tool works

Round shapes take the radius (half the diameter). Every dimension is in the unit above; the answer is in square units.

Cylinder: radius 3 cm, height 10 cm

Surface area ≈ 245.044 cm²

Lateral area (curved side) (cm²)
≈ 188.496
Base area (2 circles) (cm²)
≈ 56.5487
Total surface area (cm²)
≈ 245.044

The same total in other square units

Square meters (m²)
≈ 0.0245044
Square feet (ft²)
≈ 0.263763
Square inches (in²)
≈ 37.9819

The formulas with your numbers

  • Lateral area: 2πrh = 2 × π × 3 × 10 ≈ 188.496 cm²
  • Two bases: 2πr² = 2 × π × 3² ≈ 56.5487 cm²
  • Total surface area: A = 2πr(r + h) = 2 × π × 3 × (3 + 10) ≈ 245.044 cm²
  • Square meters: 245.044 cm² × 0.0001 m² per cm² ≈ 0.0245044 m²

Surface area formulas for eight solids

Lateral area is the sides without the bases. The last column is the calculator’s own total for each shape’s starting dimensions, in square centimeters.
ShapeDimensionsLateral areaBase areaTotal surface areaExample total (cm²)
Cubeside a4a²2a²6a²96
Rectangular prism (box)length l, width w, height h2h(l + w)2lw2(lw + lh + wh)220
Sphereradius rnone (one curved surface)none4πr²≈ 113.097
Cylinderradius r, height h2πrh2πr²2πr(r + h)≈ 245.044
Conebase radius r, height hπrs, s = √(r² + h²)πr²πr(r + s)≈ 75.3982
Square pyramidbase side a, height h2as, s = √((a/2)² + h²)a²a² + 2as96
Triangular prismtriangle sides a, b, c and length L(a + b + c) × L2B, B from Heron’s formula2B + (a + b + c) × L132
Hemisphereradius r2πr² (curved part)πr² (flat circle)3πr²≈ 84.823

Worked example for every shape

Each line is the calculator’s own working for the dimensions shown, followed by the total in another square unit.
ShapeDimensionsTotal surface area, workedIn square metersIn square feet
Cubeside 4 inA = 6a² = 6 × 4² = 96 in²≈ 0.0619354≈ 0.666667
Rectangular prism (box)length 10, width 5, height 4 inA = 2(lw + lh + wh) = 2 × (10 × 5 + 10 × 4 + 5 × 4) = 220 in²≈ 0.141935≈ 1.52778
Sphereradius 3 mA = 4πr² = 4 × π × 3² ≈ 113.097 m²≈ 113.097≈ 1,217.37
Cylinderradius 1.5, height 7.25 inA = 2πr(r + h) = 2 × π × 1.5 × (1.5 + 7.25) ≈ 82.4668 in²≈ 0.0532043≈ 0.572686
Conebase radius 3, height 8 ftA = πr(r + s) = π × 3 × (3 + 8.544) ≈ 108.8 ft²≈ 10.1078≈ 108.8
Square pyramidbase side 5, height 7 mA = a² + 2as = 5² + 2 × 5 × 7.43303 ≈ 99.3303 m²≈ 99.3303≈ 1,069.18
Triangular prismsides 7, 8, 9, length 2.5 mA = 2B + (a + b + c) × L = 2 × 26.8328 + 24 × 2.5 ≈ 113.666 m²≈ 113.666≈ 1,223.49
Hemisphereradius 2.5 ftA = 3πr² = 3 × π × 2.5² ≈ 58.9049 ft²≈ 5.47244≈ 58.9049

Surface area of a cube, side 1 to 10

Same units as the side, squared: a cube with sides of 3 cm has a surface area of 54 cm², and with sides of 3 ft it has 54 ft². Computed from 6a².
Side aOne face (a²)Lateral area (4a²)Total surface area (6a²)
1146
241624
393654
4166496
525100150
636144216
749196294
864256384
981324486
10100400600

Surface area of a sphere, radius 1 to 10

Computed from 4πr², with π as the double-precision value. The last column is the exact form, a whole number of π.
Radius rDiameterTotal surface area (4πr²)Exact form
12≈ 12.56644π
24≈ 50.265516π
36≈ 113.09736π
48≈ 201.06264π
510≈ 314.159100π
612≈ 452.389144π
714≈ 615.752196π
816≈ 804.248256π
918≈ 1,017.88324π
1020≈ 1,256.64400π

Surface area of a cylinder by radius and height

Total surface area, bases included, from 2πr(r + h). Rows are the radius and columns the height, both in the same length unit; the answer is in that unit squared.
Radius \ heighth = 1h = 2h = 5h = 10h = 20
r = 1≈ 12.5664≈ 18.8496≈ 37.6991≈ 69.115≈ 131.947
r = 2≈ 37.6991≈ 50.2655≈ 87.9646≈ 150.796≈ 276.46
r = 3≈ 75.3982≈ 94.2478≈ 150.796≈ 245.044≈ 433.54
r = 4≈ 125.664≈ 150.796≈ 226.195≈ 351.858≈ 603.186
r = 5≈ 188.496≈ 219.911≈ 314.159≈ 471.239≈ 785.398

How to find the surface area of a 3D shape

  1. Pick the shape and the unit. Choose the solid that matches the object and the length unit you measured in: millimeters, centimeters, meters, inches, feet or yards. Use the same unit for every dimension.
  2. Measure the dimensions. Enter the side of a cube, the length, width and height of a box, or the radius of anything round. A radius is half the diameter, so a can that is 6 cm across has a radius of 3 cm.
  3. Read the total. The total appears as you type. For the example cylinder it is ≈ 245.044 cm², worked as A = 2πr(r + h) = 2 × π × 3 × (3 + 10) ≈ 245.044 cm².
  4. Look at the parts. The lateral area (≈ 188.496 cm² for the example) covers the sides and the base area (≈ 56.5487 cm²) covers the ends, so you can leave a part out for an open top or a bottom that is not painted or wrapped.
  5. Convert if you need another unit. The same total is also listed in square meters, feet, centimeters and inches: the example is ≈ 0.0245044 m² or ≈ 0.263763 ft².

Frequently asked questions

How do I find the surface area of a cylinder?
Add the curved side and the two circular ends: A = 2πrh + 2πr², which factors to 2πr(r + h). With r = 1.5 in and h = 7.25 in the side is ≈ 68.3296 in² and the two ends are ≈ 14.1372 in², so the total is ≈ 82.4668 in². If you only know the diameter, halve it to get r.
What is the difference between lateral and total surface area?
Lateral area is the area of the sides only; total surface area adds the bases. A 10 × 5 × 4 in box has a lateral area of 120 in² (the four sides) and 100 in² of top and bottom, so its total is 220 in². A sphere has no separate bases, so its lateral and total area are the same surface.
How do I find the surface area of a sphere?
Use A = 4πr², which is four times the area of the sphere’s widest circle. For r = 3 m, A = 4 × π × 3², which is ≈ 113.097 m². Enter the radius, not the diameter: using the diameter by mistake makes the answer 4 times too big.
How do I find the surface area of a cone?
Find the slant height first, s = √(r² + h²), then add the curved side πrs to the base πr². With r = 3 ft and h = 4 ft, s = 5 ft, the side is ≈ 47.1239 ft², the base is ≈ 28.2743 ft², and the total is ≈ 75.3982 ft². Use the vertical height h, not the slanted edge, as the input.
How do I find the surface area of a square pyramid?
The base is a square, a², and each of the four faces is a triangle with base a and height equal to the slant height s = √((a/2)² + h²). With a = 6 m and h = 4 m, s = 5 m, the four faces add up to 60 m², the base is 36 m², and the total is 96 m².
Does a hemisphere’s surface area include the flat base?
The total surface area of a solid hemisphere does: the curved half-sphere 2πr² plus the flat circle πr² makes 3πr². With r = 3 cm that is ≈ 56.5487 cm² plus ≈ 28.2743 cm², a total of ≈ 84.823 cm². For a hollow bowl or dome, use only the curved part.
How do I work out the surface area of an open box or open cylinder?
Take the total and subtract the open face. A cylinder with r = 3 cm and h = 10 cm has a total of ≈ 245.044 cm²; with one end open you subtract one base (π × 3², which is ≈ 28.2743 cm²), leaving ≈ 216.77 cm². The lateral and base rows of the calculator give the parts to add or leave out.
Why does the triangular prism ask for three sides?
The lateral area needs the whole perimeter of the triangle, a + b + c, and the two ends need the triangle’s area, which Heron’s formula finds from the three sides without a height. With sides 7, 8 and 9 m and a length of 2.5 m the ends are ≈ 53.6656 m² and the three rectangles 60 m², so the total is ≈ 113.666 m². The longest side must be shorter than the other two added together.
Why is surface area in square units, and how do I convert it?
An area is a length times a length, so it is in square units, such as cm² or ft², and the conversion factor is squared as well: 1 ft = 12 in, so 1 ft² = 144 in². The 10 × 5 × 4 in box above has 220 in², which is ≈ 1.52778 ft². The calculator lists the total in m², ft², cm² and in² for you; the factors come from the exact definition of the inch, foot and yard.

How it works

Dimensions are read as plain positive numbers (1,250.5 is accepted) in the unit you choose and must be at most 1,000,000. The total, lateral and base areas use the standard formulas in the tables above. The cone and pyramid first find the slant height with the Pythagorean theorem, and the triangular prism finds its triangle’s area with Heron’s formula, so it must be a real triangle. A hemisphere is a half sphere (2πr²) plus its flat circle (πr²), and a cylinder or prism’s lateral area is its perimeter times its length. The maths is real-valued (π and square roots), so it runs in IEEE double-precision arithmetic, about 15 to 16 significant digits; only the display is rounded, to six significant digits, and a result shown with ≈ is rounded. The total is converted through square meters with exact factors: an inch is exactly 0.0254 m, a foot 0.3048 m and a yard 0.9144 m, so a square foot is 0.09290304 m² and a square inch 0.00064516 m². The calculator treats solids as perfect geometric shapes: it does not add allowances for wall thickness, overlap, seams, waste or rounded edges, and the answer is the outside area only.

Sources

More: Geometry and measurementAll math & numbersAll toolsHome & DIY calculators