Screen PPI Calculator
Pixels per inch (PPI) is √(width² + height²) ÷ diagonal, so a 2560 × 1440 screen with a 27-inch diagonal is 108.8 PPI, with a dot pitch of 0.233 mm. The same 27 inches at 3840 × 2160 is 163.2 PPI. Screen B is 1.5× as sharp as screen A: 50% more pixels per inch, 2.25× as many per square inch. Beyond 31.6 in (80.3 cm) the 2560 × 1440 pixels blend together for 20/20 vision (1 arcminute). Enter any resolution and diagonal below, or pick a typical display.
Updated Runs in your browser: nothing you enter is uploadedHow this tool works
Worked out in your browser. Leave screen B empty to look at one screen. The scale (device pixel ratio) is optional.
Pixel density and screen details
108.8 PPI vs 163.2 PPI
Screen B is 1.5× as sharp as screen A: 50% more pixels per inch, 2.25× as many per square inch.
| Detail | Screen A | Screen B |
|---|---|---|
| Pixel density | 108.8 PPI | 163.2 PPI |
| Pixels per centimeter | 42.8 PPCM | 64.2 PPCM |
| Dot pitch | 0.233 mm | 0.156 mm |
| Resolution | 2560 × 1440 | 3840 × 2160 |
| Total pixels | 3,686,400 (3.69 MP) | 8,294,400 (8.29 MP) |
| Diagonal | 27 in (68.58 cm) | 27 in (68.58 cm) |
| Width | 23.53 in (59.77 cm) | 23.53 in (59.77 cm) |
| Height | 13.24 in (33.62 cm) | 13.24 in (33.62 cm) |
| Aspect ratio | 16:9 | 16:9 |
| Nearest common ratio | 16:9 (the same ratio) | 16:9 (the same ratio) |
| Pixels blend beyond | 31.6 in (80.3 cm) | 21.1 in (53.5 cm) |
| Device pixel ratio | 1 | 1.5 |
| Viewport in CSS pixels | 2,560 × 1,440 | 2,560 × 1,440 |
| CSS pixels per inch | 108.8 | 108.8 |
| Formula | √(2560² + 1440²) ÷ 27 = 108.8 | √(3840² + 2160²) ÷ 27 = 163.2 |
PPI of common monitor sizes
| Resolution | Diagonal | Pixel density | Dot pitch | Pixels blend beyond |
|---|---|---|---|---|
| 1920 × 1080 | 24 in | 91.8 PPI | 0.277 mm | 37.5 in (95.1 cm) |
| 1920 × 1080 | 27 in | 81.6 PPI | 0.311 mm | 42.1 in (107 cm) |
| 1920 × 1080 | 32 in | 68.8 PPI | 0.369 mm | 49.9 in (126.8 cm) |
| 2560 × 1440 | 24 in | 122.4 PPI | 0.208 mm | 28.1 in (71.3 cm) |
| 2560 × 1440 | 27 in | 108.8 PPI | 0.233 mm | 31.6 in (80.3 cm) |
| 2560 × 1440 | 32 in | 91.8 PPI | 0.277 mm | 37.5 in (95.1 cm) |
| 3840 × 2160 | 24 in | 183.6 PPI | 0.138 mm | 18.7 in (47.6 cm) |
| 3840 × 2160 | 27 in | 163.2 PPI | 0.156 mm | 21.1 in (53.5 cm) |
| 3840 × 2160 | 32 in | 137.7 PPI | 0.184 mm | 25 in (63.4 cm) |
PPI of typical phones, laptops, tablets and TVs
| Display | Pixel density | Dot pitch | Typical scale | Viewport in CSS pixels |
|---|---|---|---|---|
| 6.1 in phone, 2532 × 1170 | 457.3 PPI | 0.056 mm | 3 | 844 × 390 |
| 6.7 in phone, 2796 × 1290 | 459.6 PPI | 0.055 mm | 3 | 932 × 430 |
| 13.3 in laptop, 2560 × 1600 | 227 PPI | 0.112 mm | 2 | 1,280 × 800 |
| 14 in laptop, 1920 × 1200 | 161.7 PPI | 0.157 mm | 1 | 1,920 × 1,200 |
| 15.6 in laptop, 1920 × 1080 | 141.2 PPI | 0.18 mm | 1 | 1,920 × 1,080 |
| 15.6 in laptop, 3840 × 2160 | 282.4 PPI | 0.09 mm | 2 | 1,920 × 1,080 |
| 11 in tablet, 2388 × 1668 | 264.8 PPI | 0.096 mm | 2 | 1,194 × 834 |
| 55 in 4K TV | 80.1 PPI | 0.317 mm | 2 | 1,920 × 1,080 |
| 65 in 4K TV | 67.8 PPI | 0.375 mm | 2 | 1,920 × 1,080 |
Pixel density and the distance where pixels blend
| Pixel density | Dot pitch | Pixels blend beyond |
|---|---|---|
| 50 PPI | 0.508 mm | 5.7 ft (1.75 m) |
| 72 PPI | 0.353 mm | 47.7 in (121.3 cm) |
| 96 PPI | 0.265 mm | 35.8 in (91 cm) |
| 110 PPI | 0.231 mm | 31.3 in (79.4 cm) |
| 150 PPI | 0.169 mm | 22.9 in (58.2 cm) |
| 220 PPI | 0.115 mm | 15.6 in (39.7 cm) |
| 300 PPI | 0.085 mm | 11.5 in (29.1 cm) |
| 460 PPI | 0.055 mm | 7.5 in (19 cm) |
How to calculate the PPI of a screen
- Enter the resolution. Type the width and height in pixels, for example 2560 × 1440, or pick a typical display from the preset list.
- Enter the diagonal. Type the diagonal screen size and choose inches or centimeters. 27 inches is 68.58 cm.
- Read the density. The PPI is √(2560² + 1440²) ÷ 27 = 108.8. The table also gives the dot pitch, physical width and height, aspect ratio, megapixels and the distance where pixels blend.
- Compare a second screen. Fill in screen B to see how much sharper one screen is than the other. Screen B is 1.5× as sharp as screen A: 50% more pixels per inch, 2.25× as many per square inch.
Frequently asked questions
- How do I calculate PPI from resolution and screen size?
- Divide the diagonal resolution in pixels by the diagonal size in inches: PPI = √(width² + height²) ÷ diagonal. For 2560 × 1440 on 27 inches, √(2560² + 1440²) ÷ 27 = 108.8. For a diagonal in centimeters, divide by 2.54 first.
- What is the PPI of a 27-inch 4K monitor?
- A 27-inch 3840 × 2160 monitor is 163.2 PPI, with a dot pitch of 0.156 mm. A 27-inch 2560 × 1440 monitor is 108.8 PPI, so 4K is 1.5 times as dense.
- What is the PPI of 1080p at 24 inches, and 4K at 32 inches?
- A 24-inch 1920 × 1080 monitor is 91.8 PPI and a 32-inch 3840 × 2160 monitor is 137.7 PPI. The table above lists all nine common monitor combinations.
- What is dot pitch, and how does it relate to PPI?
- Dot pitch is the distance between the centers of neighboring pixels, in millimeters: 25.4 ÷ PPI. A 108.8 PPI screen has a dot pitch of 0.233 mm; the denser 163.2 PPI screen has 0.156 mm. Smaller pitch means finer detail.
- At what distance can I no longer see individual pixels?
- For 20/20 vision, which resolves about 1 arcminute, pixels blend beyond dot pitch ÷ tan(1 arcminute). That is 31.6 in (80.3 cm) for the 2560 × 1440 example, 21.1 in (53.5 cm) for 3840 × 2160, and only 7.5 in (19.1 cm) for a typical 6.1-inch phone. Many people see a little finer than this, so treat it as an estimate rather than a hard limit.
- What is a good PPI for a monitor?
- Around 90 to 110 PPI is common for desktop monitors viewed at arm’s length (a 24-inch 1080p monitor is 91.8 PPI). Text looks noticeably smoother above roughly 140 PPI, which is why 4K at 27 inches (163.2 PPI) and a typical phone (457.3 PPI) look so sharp. Because you sit closer to a phone, what matters is PPI together with distance.
- What is PPI versus DPI?
- PPI counts pixels per inch on a screen or digital image. DPI counts printed ink dots per inch. The two are often confused, and a printer’s DPI says nothing about a screen. For printing, divide an image’s pixel size by the print size in inches to get the PPI it will have on paper.
- What are device pixel ratio and CSS pixels?
- Web pages are laid out in CSS pixels, and the device pixel ratio says how many physical pixels make up one. A 3840 × 2160 screen at a ratio of 1.5 has a 2,560 × 1,440 CSS pixel viewport, and 108.8 CSS pixels per physical inch. The ratio is a setting (or a device default), so it is an input here rather than something computed from the resolution.
- Does the aspect ratio change the PPI?
- Not by itself. PPI depends on the resolution and the diagonal, and the aspect ratio only shapes how that diagonal splits into width and height. The tool assumes square pixels, which is true of almost every screen sold today. It also shows the ratio in lowest terms, for example 16:9 for 2560 × 1440.
How it works
The diagonal in pixels is √(width² + height²), divided by the diagonal in inches (centimeters are divided by 2.54 first, exactly). Dot pitch is 25.4 mm ÷ PPI. The physical width and height are the pixel counts divided by the PPI, which assumes square pixels and measures the visible area, not the bezel. The distance where pixels blend is the dot pitch divided by the tangent of one arcminute, the usual figure for 20/20 acuity; it is the same angle the TV viewing distance calculator uses for its resolution limit. Aspect ratios are reduced with the greatest common divisor, as in the aspect ratio calculator. The device pixel ratio only divides the pixel counts and PPI to give CSS pixel figures. Typical displays in the presets are common retail configurations, not specific products, and their scales are usual defaults. Marketing diagonals are rounded, so a measured panel can differ by a few tenths of an inch. Everything is computed in your browser; nothing you enter is sent anywhere.
Sources
- Pixel density (Wikipedia): PPI, PPCM and the pixel density formula
- Dot pitch (Wikipedia)
- Visual acuity (Wikipedia): the 1 arcminute standard for 20/20 vision
- Window.devicePixelRatio (MDN Web Docs)
- NIST Special Publication 811, Guide for the Use of the International System of Units (1 inch = 2.54 cm exactly)
More free tools
- Aspect Ratio CalculatorFind the aspect ratio of any width and height (1920×1080 is 16:9), resize to a ratio to solve the missing side, or get a screen’s size from its diagonal.
- TV Size and Viewing Distance CalculatorFind the TV size for your seating distance, or the best viewing distance for a TV size, using SMPTE and THX viewing angles, pixel limits and mount height.
- Image ResizerResize and compress JPEG, PNG and WebP images by width, height, percent or longest side, and convert the format. Runs in your browser; nothing is uploaded.
- PX to REM ConverterConvert px to rem, em, pt, % and vw/vh with an editable root font size, see a px to rem table, or paste CSS and convert every px value to rem at once.
- CSS Flexbox GeneratorSet flex-direction, justify-content, align-items, wrap, gap and item grow, shrink and basis, see the layout live, and copy the CSS and HTML.
- Triangle CalculatorSolve a triangle from SSS, SAS, ASA, AAS or SSA (both ambiguous solutions) or a right triangle: sides, angles, area, heights and type, with the working.
More: Geometry and measurementAll math & numbersAll toolsHome & DIY calculators