Circle Calculator
Every measure of a circle follows from its radius: the diameter is d = 2r, the circumference is C = 2πr and the area is A = πr². A circle with a radius of 5 cm has a diameter of 10 cm, a circumference of 31.4159 cm and an area of 78.5398 cm². Enter any one of radius, diameter, circumference or area and the calculator gives the other three, with the formulas worked out using your numbers. Add a central angle and it also finds the arc length, sector area, chord and segment area: 60° on that circle cuts off an arc of 5.23599 cm, a sector of 13.09 cm² and a chord of 5 cm.
Updated Runs in your browser: nothing you enter is uploadedHow this tool works
Radius 5 cm
d = 10 cm · C = 31.4159 cm · A = 78.5398 cm²
- Radius
- 5 cm
- Diameter
- 10 cm
- Circumference
- 31.4159 cm
- Area
- 78.5398 cm²
Arc, sector and chord for the central angle
- Central angle
- 60°
- Arc length
- 5.23599 cm
- Sector area
- 13.09 cm²
- Chord length
- 5 cm
- Segment area
- 2.26465 cm²
- Share of the circle
- 16.6667%
The formulas with your numbers
- r = 5 cm (entered)
- d = 2 × r = 2 × 5 = 10 cm
- C = 2 × π × r = 2 × π × 5 = 31.4159 cm
- A = π × r² = π × 5² = 78.5398 cm²
- Arc length = (θ ÷ 360) × 2 × π × r = (60 ÷ 360) × 2 × π × 5 = 5.23599 cm
- Sector area = (θ ÷ 360) × π × r² = (60 ÷ 360) × π × 5² = 13.09 cm²
- Chord length = 2 × r × sin(θ ÷ 2) = 2 × 5 × sin(30°) = 2 × 5 × 0.5 = 5 cm
- Segment area = (r² ÷ 2) × (θ − sin θ), θ in radians = (5² ÷ 2) × (1.0472 − 0.866025) = 2.26465 cm²
Results are rounded to 6 significant digits; π is used at full precision in the working.
Radius, diameter, circumference and area side by side
| Radius | Diameter | Circumference | Area |
|---|---|---|---|
| 1 | 2 | 6.28319 | 3.14159 |
| 2 | 4 | 12.5664 | 12.5664 |
| 5 | 10 | 31.4159 | 78.5398 |
| 10 | 20 | 62.8319 | 314.159 |
| 12.5 | 25 | 78.5398 | 490.874 |
| 25 | 50 | 157.08 | 1,963.5 |
Arc, sector and chord for common central angles
| Central angle | Share of the circle | Arc length | Sector area | Chord length | Segment area |
|---|---|---|---|---|---|
| 30° | 8.33333% | 5.23599 | 26.1799 | 5.17638 | 1.17994 |
| 45° | 12.5% | 7.85398 | 39.2699 | 7.65367 | 3.91457 |
| 60° | 16.6667% | 10.472 | 52.3599 | 10 | 9.05861 |
| 90° | 25% | 15.708 | 78.5398 | 14.1421 | 28.5398 |
| 120° | 33.3333% | 20.944 | 104.72 | 17.3205 | 61.4185 |
| 180° | 50% | 31.4159 | 157.08 | 20 | 157.08 |
| 270° | 75% | 47.1239 | 235.619 | 14.1421 | 285.619 |
Circle formulas
| Measure | Formula | Result |
|---|---|---|
| Diameter | d = 2r | 10 |
| Circumference | C = 2πr = πd | 31.4159 |
| Area | A = πr² | 78.5398 |
| Radius from the circumference | r = C ÷ 2π | 5 |
| Radius from the area | r = √(A ÷ π) | 5 |
| Arc length | s = (θ ÷ 360) × 2πr | 5.23599 |
| Sector area | (θ ÷ 360) × πr² | 13.09 |
| Chord length | 2r × sin(θ ÷ 2) | 5 |
| Segment area | (r² ÷ 2) × (θ − sin θ), θ in radians | 2.26465 |
How to find the radius, diameter, circumference and area of a circle
- Choose the measure you know. Pick radius, diameter, circumference or area in the first box and type its value. The example is a radius of 5 cm.
- Read the other three. The calculator shows the radius, diameter, circumference and area together: for a radius of 5 cm they are 10 cm, 31.4159 cm and 78.5398 cm² for diameter, circumference and area.
- Add a unit label if you want one. Type cm, in, ft or any label up to 12 characters and it is attached to every length, and squared for every area (cm²). It is only text: the calculator does not convert between units.
- Enter a central angle for a slice of the circle. Type an angle in degrees, from just above 0 up to 360, to get the arc length, sector area, chord and segment area. A 60° angle on the example circle gives an arc of 5.23599 cm.
- Check the working. Under the result, each formula is written out with your numbers substituted, such as C = 2 × π × 5 = 31.4159 cm. Use the copy button to take the results with you.
Frequently asked questions
- How do I find the area of a circle from its diameter?
- Halve the diameter to get the radius, then use A = πr². A diameter of 12 has a radius of 6 and an area of 113.097. Choose “Diameter” in the first box and the calculator does both steps.
- How do I find the radius from the area?
- Divide the area by π and take the square root: r = √(A ÷ π). An area of 100 gives a radius of 5.6419, a diameter of 11.2838 and a circumference of 35.4491.
- How do I find the radius from the circumference?
- Divide the circumference by 2π: r = C ÷ 2π. A circumference of 100 gives a radius of 15.9155 and an area of 795.775. A string 100 long, pulled into a circle, would enclose that area.
- What is the difference between circumference and area?
- The circumference is the distance around the circle, a length, so it has the unit of the radius (cm). The area is the surface inside, measured in squared units (cm²). For a radius of 5 cm the circumference is 31.4159 cm and the area is 78.5398 cm². Doubling the radius doubles the circumference but quadruples the area.
- What are arc length, sector area and chord?
- Take two radii a central angle θ apart. The arc is the curved part of the circle between them, the sector is the pizza slice between the two radii and the arc, and the chord is the straight line joining the two ends of the arc. For a radius of 10 and a 90° angle the arc is 15.708, the sector area is 78.5398 and the chord is 14.1421.
- What is the segment area?
- The segment is the part of the circle cut off by the chord, the sector minus the triangle formed by the two radii and the chord. For a radius of 10 and a 90° angle it is 28.5398. A 180° angle cuts the circle into two halves: the chord is the diameter (20) and the segment is half the area (157.08).
- Do I enter the angle in degrees or radians?
- Degrees. To use radians, multiply by 180 ÷ π: 1 radian is about 57.2958 degrees, and π radians is 180 degrees. The calculator shows the angle in radians inside the segment working.
- Which value of π does the calculator use?
- The full double-precision value of π, about 3.141592653589793, so no rounding creeps in until the last step. Results are shown to 6 significant digits: a radius of 5 gives an area of 78.5398, not 78.5 or 78.54 as you would get with π ≈ 3.14 or 3.1416.
- Does the unit label convert anything?
- No. It is only text attached to the answers: lengths get the label as typed and areas get it squared (78.5398 cm² for the example). Use the same unit for everything you type, or convert first with a unit converter.
- What happens with very small angles and very big circles?
- Radii from 0.000000001 to 1,000,000,000,000 are accepted. Very large or very small results switch to e-notation, such as 4.43041e-7 for the segment of a 1-degree angle on a radius of 1. The segment area uses a series for small angles so it keeps its digits instead of losing them to subtraction.
How it works
The radius comes first: it is the entered value, half the diameter, the circumference divided by 2π, or the square root of the area divided by π. Then d = 2r, C = 2πr and A = πr². For a central angle θ in degrees the arc length is (θ ÷ 360) × 2πr, the sector area is (θ ÷ 360) × πr², the chord is 2r × sin(θ ÷ 2), and the segment area is the sector minus the triangle, (r² ÷ 2) × (θ − sin θ) with θ in radians; for angles under about 2.9 degrees the θ − sin θ term is computed from its series θ³ ÷ 6 − θ⁵ ÷ 120 + θ⁷ ÷ 5040 to avoid cancellation. A full 360 degrees has a chord of 0 and a segment equal to the whole circle. Arithmetic uses JavaScript floating point (double precision) with the exact π constant; only the display is rounded, once, to 6 significant digits, with thousands commas and e-notation below 0.0001 or from 1,000,000,000,000. The formulas written under the result substitute the rounded figures that are displayed, so a last digit can differ by one from re-doing the arithmetic by hand with them. The input accepts a plain number, thousands commas (1,234.5) or an exponent (1.5e3), and must be greater than 0. The unit label is text only: lengths show it as typed and areas show it squared. Everything runs in your browser and nothing you type is sent anywhere.
Sources
More free tools
- Triangle CalculatorSolve a triangle from SSS, SAS, ASA, AAS or SSA (both ambiguous solutions) or a right triangle: sides, angles, area, heights and type, with the working.
- Slope CalculatorSlope from rise and run as percent, degrees and ratio (1:12). Convert 2% or 20% slope to degrees and find the drop over 10 ft. Feet, inches or metric.
- Surface Area CalculatorTotal, lateral and base surface area of a cube, box, sphere, cylinder, cone, pyramid, triangular prism or hemisphere, with your numbers in the formula.
- Distance and Midpoint CalculatorDistance between two points in 2D or 3D in exact radical form like 5√2 plus decimal, the midpoint as fractions, slope and line equation, with a plot.
- Area CalculatorPick a shape (rectangle, triangle, circle, trapezoid, ellipse, polygon, ring and more) and get its area and perimeter, with the formula and working.
- Pythagorean Theorem CalculatorFind the hypotenuse or a missing leg from any two sides, with area, angles and altitude. Test 3-4-5 right angles and find rectangle or screen diagonals.
- Square Footage CalculatorCalculate the square footage of a room from its length and width, with fields to subtract closets or other cutouts. A 12 × 14 ft room is 168 sq ft.
More: Geometry and measurementAll math & numbersAll toolsHome & DIY calculators