Skip to main content
ponderloop

Roofing Nail Calculator: How Many Nails, Pounds and Boxes?

A 1,500 sq ft roof (15 squares) of architectural shingles nailed 4 to a shingle needs 4 boxes of 5 lb 1-1/4 in roofing nails: 15 squares × 64 shingles × 4 nails = 3,840 nails, 4,224 with 10% extra, about 20 lb in 1-1/4 in nails or 23 lb in 1-1/2 in. With 6 nails per shingle for high wind it is 6,336 nails, 6 boxes. In coil nails (7,200 to a box) the same roof is 1 box, 36 coils of 120. The shingles per square are from the makers’ data sheets; nails per pound are a typical figure, so the box label wins.

Figures based on the sources listed belowUpdated How we calculate

Extra nails

The true area of the sloping roof surface, not the footprint of the house. The roofing shingles calculator turns a footprint and pitch into this area.
Roofers measure in squares: one square is 100 sq ft of roof.
The shingles in a square set the nail count. Architectural shingles are packed about 64 to 66 to the square; 3-tab shingles about 80. Check the wrapper.
Manufacturers call for 4 nails per shingle in a standard application and 6 where wind, slope or local code require it. Check your shingle’s instructions.
Loose roofing nails are sold by weight; coil nails by the box of 7,200 (60 coils of 120).
The nail must go through the shingles and about 3/4 in into a wood deck (or through the sheathing). 1-1/4 in suits most single layers; 1-1/2 in for ridge cap, thicker shingles or a second layer.
Loose roofing nails come in 1 lb, 5 lb and 50 lb boxes.

Eave (and rake) length to add nails for the starter course, at about 4 nails per 3 ft piece (an estimate). Leave 0 to skip.

Ridge and hip length to add nails for the cap, at 2 nails per cap piece with about a 6-2/3 in exposure (GAF Seal-A-Ridge). Cap nails often need to be 1-1/2 in or longer. Leave 0 to skip.

Buy 4 boxes.

Buy 4 boxes

1,500 sq ft + 10% waste = 1,650.00 sq ft

  • Roof area: 15 squares (1,500 sq ft)
  • Nails per square: 256 nails, 64 shingles × 4 nails
  • Roofing nails, with extra: 4,224 nails
  • Weight in 1-1/4 in nails (estimate): 20 lb, about 218 per lb
  • Weight in 1-1/2 in nails (estimate): 23 lb, about 186 per lb
How this number is calculated

1,500 sq ft + 10% waste = 1,650.00 sq ft ÷ 425.78 sq ft per box = 4 boxes

Shopping list

  • Roofing nails (1-1/4 in, galvanized)
  • Roofing nails (1-1/2 in, galvanized)
  • Coil roofing nails (15 degree wire weld)
  • Coil roofing nailer
  • Roofing hammer or hatchet
  • Magnetic nail sweeper

Saved projects

No saved projects yet.

Nails per roofing square by shingle type

Nails = shingles per square × nails per shingle, before the extra percentage. GAF prints 256 and 384 for its 64-shingle squares; the other rows are worked the same way. 3-tab counts are typical.
ShingleShingles per square4 nails each6 nails each
GAF Timberline HDZ, Owens Corning Duration64256384
CertainTeed Landmark66264396
3-tab (typical)80320480

Roofing nails for a roof by size

Architectural shingles at 64 per square, 10% extra, worked by this calculator; pounds are 1-1/4 in nails at about 218 per lb (an estimate).
RoofNails (4 each)Weight (4 each)Nails (6 each)Weight (6 each)
10 squares2,81613 lb4,22420 lb
15 squares4,22420 lb6,33630 lb
20 squares5,63226 lb8,44839 lb
25 squares7,04033 lb10,56049 lb
30 squares8,44839 lb12,67259 lb
40 squares11,26452 lb16,89678 lb

Nails per pound and per box (typical)

Typical counts for 11 gauge roofing nails; a 0.120 in coil nail weighs the same. Head, coating and brand vary by 10% or more: an estimate, and the box label has the real count.
LengthPer lb1 lb5 lb50 lb
1-1/4 in2182181,09010,900
1-1/2 in1861869309,300

Methodology & assumptions

Nails = squares × shingles per square × nails per shingle, where a square is 100 sq ft of roof. Manufacturers’ data sheets print 64 shingles per square for GAF Timberline HDZ (and about 64 for Owens Corning Duration), which at 4 nails per shingle is 256 nails per square and at 6 nails 384; CertainTeed Landmark is rated at about 66 per square, and ordinary 12 × 36 in 3-tab shingles at a 5 in exposure take about 80 (typical: 240 tab slots of 5 × 12 in in a square, three per shingle). Pick the product you buy; the wrapper has the real count. Owens Corning and GAF both allow 4 nails in a standard application and call for 6 where wind, slope or local code require it. Cutouts you enter (a skylight, a chimney) come off the area. The optional starter and ridge fields add nails: 2 per cap piece at about a 6-2/3 in exposure (GAF Seal-A-Ridge instructions), which is 3.6 per foot, and about 4 per 3 ft piece of starter, 1.33 per foot (an estimate; check the starter’s own instructions). The extra percentage is applied to the total and the result is rounded up once. Weight uses the typical count per pound of an 11 gauge (0.120 in) roofing nail: about 218 per lb at 1-1/4 in and 186 at 1-1/2 in, from retail box counts (a 50 lb box of 1-1/4 in nails holds about 10,900 and of 1-1/2 in about 9,300). Head, coating and brand move those counts by 10% or more, so the weight is an estimate. A 0.120 in coil nail weighs the same, and coil nails are sold 7,200 to a box in coils of 120. The nail must be long enough to go through the shingles and about 3/4 in into a wood deck, or through the sheathing: 1-1/4 in does that for a single layer of most shingles, and thicker shingles, ridge cap or a second layer call for 1-1/2 in or more. Corrosion-resistant nails of 11 or 12 gauge with a head at least 3/8 in wide are what the makers name. This page counts shingle nails only: underlayment cap nails, flashing and drip edge fasteners, and nails for a metal roof are separate.

How to calculate roofing nails

  1. Find the roof area in squares. Use the true area of the sloping roof, not the footprint, and divide by 100 sq ft for squares. The roofing shingles calculator gives it from the footprint and pitch.
  2. Find the shingles per square. About 64 for GAF and Owens Corning architectural shingles, 66 for CertainTeed Landmark, 80 for 3-tab. Check the wrapper.
  3. Multiply by nails per shingle. 4 nails in a standard application, 6 for high wind or steep slopes. Nails = squares × shingles per square × nails per shingle.
  4. Add starter, ridge and extra. Add nails for the starter course and the ridge cap (2 per cap piece), then 5 to 10% for misfires and drops.
  5. Convert to pounds, boxes or coils. Divide by about 218 per lb for 1-1/4 in nails or 186 for 1-1/2 in; or by 120 per coil and 7,200 per box for coil nails. Round up.

Worked examples

ProjectResult
1,500 sq ft roof, architectural shingles at 64 per square, 4 nails each, 1-1/4 in hand-drive nails in 5 lb boxes15 squares + 10% → 4 boxes, 4,224 nails, 20 lb
The same roof with 6 nails per shingle for high wind15 squares + 10% → 6 boxes, 6,336 nails, 30 lb
25 squares of 3-tab shingles (80 per square), 4 nails each, 1-1/4 in hand-drive nails in 5 lb boxes25 squares + 10% → 9 boxes, 8,800 nails, 41 lb
The 1,500 sq ft roof with coil nails, 1-1/4 in, boxes of 7,20015 squares + 10% → 1 box, 4,224 nails, 36 coils
30 squares, 6 nails each, 1-1/2 in hand-drive nails in 50 lb boxes30 squares + 10% → 2 box, 12,672 nails, 69 lb
The 1,500 sq ft roof with 150 ft of starter and 40 ft of ridge added (estimate), 5 lb boxes15 squares + 10% → 5 boxes, 4,603 nails, 22 lb
The 1,500 sq ft roof in CertainTeed Landmark (66 per square) with coil nails15 squares + 10% → 1 box, 4,356 nails, 37 coils

Frequently asked questions

How many roofing nails do I need per square?
At 4 nails per shingle, 256 nails for a square of 64 architectural shingles, which is what GAF’s data sheet prints, and 384 at 6 nails. 3-tab shingles run about 80 to a square, so about 320 at 4 nails. A 15 square roof therefore needs 3,840 nails before extra, 4,224 with 10%, about 20 lb of 1-1/4 in nails.
How many roofing nails are in a pound?
For 11 gauge roofing nails, about 218 per pound at 1-1/4 in and about 186 at 1-1/2 in, read from retail box counts (a 50 lb box of 1-1/4 in nails holds about 10,900; of 1-1/2 in about 9,300). Those are typical figures: head size, coating and brand shift them by 10% or more, so read the count on your box. A coil nail of the same 0.120 in wire weighs about the same, so a 7,200 box of 1-1/2 in coil nails is roughly 39 lb.
4 nails or 6 nails per shingle?
Four is the standard application for most architectural shingles. Owens Corning and GAF call for 6 where the slope is steep or where wind or local code require it, and some products need 6 for their top wind rating. Six nails on the 15 square example raises 4,224 nails to 6,336, 4 boxes to 6. Follow the instructions printed on your shingle’s wrapper; they govern your warranty.
How many shingles are in a square?
A square is 100 sq ft of roof. Architectural shingles are packed about 64 to the square (GAF Timberline HDZ, Owens Corning Duration; CertainTeed Landmark lists about 66), 3 bundles to a square for most products, though some premium lines pack 4. Standard 12 × 36 in 3-tab shingles at a 5 in exposure take about 80, also 3 bundles. The wrapper has the exact count, and this calculator lets you choose.
What length of roofing nail do I need?
It must go through the shingles and about 3/4 in into a wood deck, or at least 1/8 in through plywood or OSB. 1-1/4 in is the usual choice for a single layer of standard shingles, 1-1/2 in for thicker shingles, ridge cap or tear-over jobs. Corrosion-resistant steel nails of 11 or 12 gauge with a head at least 3/8 in wide are what shingle makers name. Longer nails weigh more, which is why the result shows both weights.
How many nails go in a box or coil?
Coil roofing nails come 120 to a coil and 7,200 (60 coils) to a box, in 1-1/4 in and 1-1/2 in. The example roof takes 4,224 nails: 36 coils, 1 box. Loose hand-drive nails are sold by weight, in 1, 5 and 50 lb boxes, so the box count is the pounds divided by the box weight. A 5 lb box of 1-1/4 in nails holds about 1,090.
Do I need nails for the starter strip and ridge cap?
Yes, a little. Ridge cap takes 2 nails per piece, so a 40 ft ridge at a 6-2/3 in exposure takes about 144 nails, and a starter course about 4 per 3 ft piece (an estimate). Enter the lengths in the optional fields; the example with 150 ft of starter and 40 ft of ridge goes from 4,224 to 4,603 nails. Ridge cap often needs nails of 1-1/2 in or more, so buy some of those.
Is the nail weight exact?
No. The pounds are the nail count divided by a typical count per pound, rounded up, and real nails differ by brand. Use it to decide how much to buy, add a box if the roof is near a boundary, and note that nails are cheap beside the shingles: a few leftover nails are better than a trip back mid-job.

Related calculators