Significant Figures Calculator
Every non-zero digit is significant, and so are the zeros between them; leading zeros never are, and trailing zeros count only when the number has a decimal point: 0.0040500 has 5 significant figures, while 1500 has 2 by the usual convention (the trailing zeros are ambiguous) and 1500. has 4. To round, keep N figures and look at the next digit: 2.345 to 3 sig figs is 2.35 rounding half up and 2.34 rounding half to even. When you calculate, multiplying or dividing keeps the fewest significant figures (4.56 × 1.4 = 6.4), and adding or subtracting keeps the fewest decimal places (12.11 + 18.0 = 30.1). Type a number below to see the rule applied to each digit, the exact rounding, and every step of the arithmetic.
Updated Runs in your browser: nothing you enter is uploadedHow this tool works
Count significant figures
- 0✗ leading
- .
- 0✗ leading
- 0✗ leading
- 4✓ counts
- 0✓ captive
- 5✓ counts
- 0✓ trailing
- 0✓ trailing
5 significant figures
The digits that count are highlighted above.
The rule applied to each digit
- Leading zeros (3): Leading zeros only place the decimal point, so they never count.
- Non-zero digits (2): Non-zero digits always count.
- Captive zero (1): Zeros between non-zero digits (captive zeros) always count.
- Trailing zeros after a decimal point (2): Trailing zeros count when the number has a decimal point: writing them shows the value is known that precisely.
Ambiguous trailing zeros
To say how many zeros were measured, write the number one of these ways:
Round to significant figures
2.345 to 3 significant figures, half up =
2.35
4 significant figures in, 3 significant figures out.
- Scientific notation
- 2.35 × 10⁰
- Round half up
- 2.35
- Round half to even
- 2.34
- Exact tie
- Yes: the dropped digits are exactly 5
- Sig figs in your number
- 4
- Sig figs shown
- 3
- The dropped digits are exactly half a unit of the last kept digit, a tie. Half up gives 2.35; half to even gives 2.34, the neighbour whose last digit is even.
Calculate with significant figures
12.11 + 18.0 =
30.1
Rounded to the fewest decimal places, half up.
- Exact result
- 30.11
- Rule
- Fewest decimal places
- Rounded to
- the tenths place
- Scientific notation
- 3.01 × 10¹
- Sig figs in the answer
- 3
Step by step
- Find the last significant decimal place of each number12.11 ends in the hundredths place (2 decimal places). 18.0 ends in the tenths place (1 decimal place).
- Do the addition exactly12.11 + 18.0 = 30.11.
- Keep the fewest decimal placesThe coarser place is the tenths (from 18.0), so the answer is rounded to the tenths.
- Round to the tenths, half up30.11 rounds to 30.1.
The rules for counting significant figures
| Digits | Example | Significant figures | Rule |
|---|---|---|---|
| Non-zero digits | 123 | 3 | Always count. |
| Captive zeros (between non-zero digits) | 1002 | 4 | Always count. |
| Leading zeros | 0.00123 | 3 | Never count: they only place the decimal point. |
| Trailing zeros after a decimal point | 0.0450 | 3 | Count: writing them shows the precision. |
| Trailing zeros with a decimal point at the end | 1200. | 4 | Count: the point removes the doubt. |
| Trailing zeros, whole number, no decimal point | 1200 | 2 | Placeholders by convention, so they do not count (ambiguous). |
| Scientific notation | 1.200 × 10^3 | 4 | Every digit of the coefficient counts; the power of 10 never does. |
| The number zero | 0 | 1 | Counts as 1; 0.00 also has 1. |
Writing 1500 so the count is clear
| Written as | Significant figures | How it is made clear |
|---|---|---|
| 1500 | 2 | Ambiguous: read as 2 by the textbook convention |
| 1.5 × 10³ | 2 | scientific notation |
| 1.50 × 10³ | 3 | scientific notation |
| 1.500 × 10³ | 4 | scientific notation |
| 1500. | 4 | trailing decimal point |
| 150̅0 | 3 | overbar on the last significant zero |
Round half up and round half to even
| Number | Sig figs | Half up | Half to even |
|---|---|---|---|
| 2.5 | 1 | 3 | 2 |
| 3.5 | 1 | 4 | 4 |
| 2.345 | 3 | 2.35 | 2.34 |
| 2.355 | 3 | 2.36 | 2.36 |
| 0.125 | 2 | 0.13 | 0.12 |
| 2.3451 | 3 | 2.35 | 2.35 |
Significant figures in calculations
| Calculation | Exact result | Rule | Answer |
|---|---|---|---|
| 12.11 + 18.0 | 30.11 | Fewest decimal places | 30.1 |
| 18.0 − 12.11 | 5.89 | Fewest decimal places | 5.9 |
| 1500 + 0.25 | 1500.25 | Fewest decimal places | 1500 |
| 4.56 × 1.4 | 6.384 | Fewest significant figures | 6.4 |
| 0.00230 × 4.5 | 0.01035 | Fewest significant figures | 0.010 |
| 100. ÷ 3.0 | 33.3333333333… | Fewest significant figures | 33 |
| 1 ÷ 3 | 0.333333333333… | Fewest significant figures | 0.3 |
How to count and use significant figures
- Find the first non-zero digit. Everything to its left is a leading zero and is ignored: in 0.0040500 the three zeros before the 4 only place the decimal point.
- Count from there to the last digit that counts. Digits from the first non-zero digit on count, including the captive zero between 4 and 5. The two trailing zeros count because the number has a decimal point, so 0.0040500 has 5 significant figures.
- Check trailing zeros in whole numbers. Without a decimal point, trailing zeros are placeholders: 1500 has 2. Write 1500. or 1.500 × 10³ for 4, or 1.5 × 10³ to make 2 explicit.
- To round, keep N figures and look at the next digit. Below 5 leave the last kept digit alone; above 5 add one; for an exact 5 choose half up or half to even. 2.345 to 3 figures is 2.35 (half up) or 2.34 (half to even).
- In a product or quotient, keep the fewest figures. 4.56 × 1.4 = 6.384 becomes 6.4, because 1.4 has only 2 significant figures.
- In a sum or difference, keep the fewest decimal places. 12.11 + 18.0 = 30.11 becomes 30.1, because 18.0 is only known to the tenths.
Frequently asked questions
- How many significant figures does a number have?
- Count every digit from the first non-zero digit to the last digit that counts. Non-zero digits and zeros between them always count; leading zeros never do; trailing zeros count only when the number has a decimal point. So 123 has 3, 0.00123 has 3, 1002 has 4 and 0.0450 has 3.
- Are trailing zeros significant? What about 1500?
- It depends on the decimal point. After a decimal point they count: 1.500 has 4. In a whole number such as 1500 they are ambiguous, and the usual textbook convention treats them as placeholders, so 1500 has 2. This tool uses that convention and flags the number as ambiguous. To say otherwise, write 1500. (4), 1.50 × 10³ (3), or put an overbar on the last significant zero, as in 150̅0 (3).
- Why do leading zeros not count?
- They only show where the decimal point is. 0.00123 is 1.23 × 10⁻³ in scientific notation, which plainly has 3 figures; changing the unit (1.23 mm to 0.00123 m) must not change how precisely a length is known.
- Do exact numbers have significant figures?
- Counted and defined values are exact: 12 eggs, or 100 cm in 1 m. They have unlimited significant figures, so they never limit an answer. Only measured values do. Type such a number with plenty of figures (for example 12.000000) or leave it out of the comparison when you apply the rule.
- What is the rule for adding and subtracting?
- Round the exact result to the same decimal place as the least precise number, regardless of how many significant figures that leaves: 12.11 + 18.0 = 30.11, rounded to the tenths because of 18.0, is 30.1. The answer to 1500 + 0.25 is 1500, since 1500 is only known to the hundreds.
- What is the rule for multiplying and dividing?
- Keep as many significant figures as the factor with the fewest. 4.56 × 1.4 = 6.384, which is 6.4 because 1.4 has 2. A quotient that never ends is cut where the rule says: 1 ÷ 3 = 0.3.
- Should I round half up or half to even?
- They agree unless the dropped digits are exactly 5. Introductory textbooks, such as OpenStax Chemistry 2e §1.5, usually teach rounding a 5 up. NIST SP 811 and ASTM E29 send an exact tie to the even digit, so that ties do not always push results the same way. 2.345 to 3 figures is 2.35 by the first and 2.34 by the second. Check which one your course or standard asks for; half up is the default here.
- Why does 2.675 round to 2.68 here when other tools give 2.67?
- Spreadsheets and programming languages store 2.675 as a binary float that is a hair below 2.675, so float-based rounding can return 2.67. This tool keeps the digits as typed and works in exact decimal arithmetic: 2.675 to 3 figures is 2.68 half up, and 2.68 half to even (the 7 is odd, so the tie goes up). A tie like 2.665 shows the difference: 2.67 half up, 2.66 half to even.
- Should I round at every step of a long calculation?
- No. Carry at least one extra digit through the middle of a calculation and round once at the end, otherwise rounding errors pile up. The step-by-step view shows the exact result before it rounds, so you can see what a single rounding at the end gives.
- Is my number sent anywhere?
- No. Counting, rounding and arithmetic all run in your browser. What you type stays on your device, and the page only records that the tool was used, never the numbers.
How it works
Each number is read as a digit string and a power of ten, never as a floating-point value, by the same parser as the scientific notation converter on this site. The digits are labelled in order: zeros before the first non-zero digit are leading; zeros between non-zero digits are captive; zeros after the last non-zero digit are trailing, and they count only if the number was typed with a decimal point. A power of ten typed in E or × 10^n form is never counted. Whole numbers with trailing zeros, no decimal point and no exponent are flagged as ambiguous and counted by the textbook convention that the zeros are placeholders (1.5 × 10³ has 2; writing the point or more digits of a scientific-notation coefficient makes more count). Rounding keeps N figures, or every digit down to a chosen place, and looks at the dropped digits: below half rounds down, above half rounds up, and an exact half is a tie decided by half up (away from zero) or half to even (to the neighbour with an even last digit). Addition and subtraction are done exactly on aligned digits and rounded to the coarser decimal place of the two inputs; multiplication is exact and rounded to the fewer significant figures; a quotient is computed to twenty digits with a marker for the remainder, so a tie is never invented. Exact (counted or defined) numbers have unlimited figures and are not modelled separately. Everything runs in your browser and nothing you type is sent anywhere.
Sources
- OpenStax Chemistry 2e, §1.5 Measurement Uncertainty, Accuracy, and Precision (significant figures)
- NIST Special Publication 811, Guide for the Use of the International System of Units (SI): rounding numbers
- ASTM E29, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
- Significant figures, Wikipedia
More free tools
- Rounding CalculatorRound a number to decimal places, a place value (tens, hundreds) or the nearest 0.05 or 5, with half up, banker’s, half down, floor and ceiling modes.
- Number to Words ConverterWrite any number in words: digits, decimals, negatives, check amounts and ordinals, with optional British “and”. Exact up to 66 digits.
- Unit ConverterConvert length, area, volume, weight and temperature with exact factors, plus cubic yards, tons and bags for gravel, soil, sand and concrete.
- Scientific Notation ConverterConvert any number to scientific, E and engineering notation or back to standard form, round to significant figures, and count the sig figs you typed.
- Logarithm and Exponent CalculatorCalculate log of any base, ln, log10 and log2, antilogs and b^x, and solve b^x = y, with exact answers shown as fractions and steps.
- Permutation and Combination CalculatorCalculate nPr and nCr, with or without repetition: exact big results, digit count, scientific notation, the formula worked out and a list of arrangements.
More: Algebra and number theoryAll math & numbersAll toolsHome & DIY calculators