Why a 1 TB Drive Shows as 931 GB: Decimal vs Binary Units
A 1 TB drive holds 10^12 bytes, which is 931.32 GiB. The gap is 1000 versus 1024 per step, not missing space. Full table of KB, MB, GB and TB.
A drive sold as 1 TB holds exactly 1,000,000,000,000 bytes, and 1,000,000,000,000 ÷ 1,073,741,824 = 931.32 when you count in gibibytes (GiB). Nothing is missing. The seller counted in powers of 1000, and your computer counted in powers of 1024, so the same bytes produce two different-looking numbers. The gap is 7.37% per gigabyte step and grows with every prefix.
Two systems, two meanings of “giga”
The prefixes kilo, mega, giga and tera are SI prefixes, defined in the SI Brochure as powers of 1000. So a gigabyte (GB) is 1,000,000,000 bytes. Computer memory, however, is built in powers of two, so for decades “kilobyte” was also used for 1024 bytes. To end the ambiguity, IEC 80000-13 defines separate binary prefixes, and NIST’s reference on prefixes for binary multiples lists them too.
| Decimal (SI) | Bytes | Binary (IEC) | Bytes |
|---|---|---|---|
| kilobyte (kB) | 1000 | kibibyte (KiB) | 1024 |
| megabyte (MB) | 1,000,000 | mebibyte (MiB) | 1,048,576 |
| gigabyte (GB) | 1,000,000,000 | gibibyte (GiB) | 1,073,741,824 |
| terabyte (TB) | 1,000,000,000,000 | tebibyte (TiB) | 1,099,511,627,776 |
| petabyte (PB) | 10^15 | pebibyte (PiB) | 1,125,899,906,842,624 |
Written as formulas: decimal is 1000^n and binary is 1024^n, where n is 1 for kilo, 2 for mega, 3 for giga, 4 for tera and 5 for peta. Notice the “bi” in the binary names and the lowercase “k” in kB versus the capital K in KiB.
How big is the gap?
The ratio between each pair is 1.024 raised to the power n. The gap shows up in two directions, depending on which way you ask:
| Prefix | Binary unit is bigger by | The same bytes read as fewer units by |
|---|---|---|
| kilo (KB vs KiB) | 2.40% | 2.34% |
| mega (MB vs MiB) | 4.86% | 4.63% |
| giga (GB vs GiB) | 7.37% | 6.87% |
| tera (TB vs TiB) | 9.95% | 9.05% |
| peta (PB vs PiB) | 12.59% | 11.18% |
At the giga level, a gibibyte (1,073,741,824 bytes) is 7.37% larger than a gigabyte (1,000,000,000 bytes). That is where the 7.37% figure comes from. Put the other way, a number of bytes that you call 100 GB measures only 93.13 GiB, which is 6.87% fewer units. The percentage is different depending on which unit you take as the base, because 1 ÷ 1.0737 is 0.9313.
Common drive sizes, in GB and in GiB
Every row is capacity in bytes divided by 2^30 (1,073,741,824):
| Advertised (decimal) | Bytes | Shown in GiB |
|---|---|---|
| 32 GB | 32,000,000,000 | 29.80 |
| 128 GB | 128,000,000,000 | 119.21 |
| 256 GB | 256,000,000,000 | 238.42 |
| 500 GB | 500,000,000,000 | 465.66 |
| 512 GB | 512,000,000,000 | 476.84 |
| 1 TB | 1,000,000,000,000 | 931.32 |
| 2 TB | 2,000,000,000,000 | 1,862.65 |
A 2 TB drive is 1.82 TiB, since 2 × 10^12 ÷ 2^40 = 1.819. For a 1 TB drive the gap is 1000 − 931.32 = 68.68 GiB: not lost, just counted in a bigger unit.
Worked example: 1 TB step by step
- Write 1 TB as bytes: 1 × 1000^4 = 1,000,000,000,000.
- Write 1 GiB as bytes: 1024^3 = 1,073,741,824.
- Divide: 1,000,000,000,000 ÷ 1,073,741,824 = 931.3225…
- The result is 931.32 GiB. In tebibytes it is 1,000,000,000,000 ÷ 1,099,511,627,776 = 0.9095 TiB.
Some operating systems report capacity in binary units but still print the label “GB”, which is why the on-screen number is 931 GB while the box says 1 TB. Other systems show decimal units and match the box. The same drive can therefore look different on two computers, though the byte count is identical. Where a screen says GiB or TiB, it is using the IEC names correctly.
Quick conversion rules
- Advertised GB to GiB: divide by 1.073741824, or multiply by 0.9313.
- Advertised TB to TiB: divide by 1.099511627776, or multiply by 0.9095.
- GiB to advertised GB: multiply by 1.073741824.
- Rough mental check: subtract about 7% from a GB figure, 9% from a TB figure, to get GiB or TiB.
Why the difference still exists
Computer memory is addressed in powers of two, so memory sizes are naturally binary: 16 GiB is 17,179,869,184 bytes. Storage makers and network engineers use the decimal SI meaning, which matches how every other SI prefix works, so a 100 Mbit/s link is 100,000,000 bits per second. Mixing the two conventions, often under the same label, is what creates the confusion.
Try it
To check any size yourself, open the Data Storage Converter, enter a value such as 1 with the unit TB, and choose GiB as the target. The converter handles bits, bytes, the decimal units (kB to PB) and the binary units (KiB to PiB) with exact integer ratios, so you can see the same byte count in both systems side by side.
Updated 2026-11-02