Skip to main content
ponderloop

Drywall Screw Calculator: How Many Screws Do I Need?

A 20 × 12 ft wall area (240 sq ft, 7.5 sheets of 4 × 8) with framing 16 in on center needs 1 box of 5 lb #6 × 1-1/4 in coarse-thread screws for 1/2 in board: about 1 screw per sq ft is 240 screws, 264 with 10% extra, about 2 lb. The same area as a ceiling, with screws up to 12 in apart, takes 352 screws, and 5/8 in board takes the longer 1-5/8 in screw (2 lb for that ceiling). Rule of thumb: about 32 screws per 4 × 8 sheet on a wall and 43 on a ceiling.

Figures based on the sources listed belowUpdated How we calculate

Extra screws
Ceilings are fastened closer because the board hangs from the screws: the maximum spacing along the framing is 12 in on ceilings and 16 in on walls (GA-216, USG), so a ceiling takes about a third more screws (an estimate).

Already know how many sheets? Enter them here and the length and width above are ignored. Leave 0 to work from the area.
Sets the area of a sheet, for the sheet count and the screws per sheet. The screws per sq ft do not change with the sheet size.
Wider framing means fewer rows of screws. 1/2 in regular board on 24 in ceiling joists can sag unless it is a sag-resistant type; check the board’s label.
The screw has to go about 5/8 in into wood framing: 1-1/4 in for 1/2 in board, 1-5/8 in for 5/8 in board. Two layers take the longer screw in the face layer.
Drywall screws are sold by weight: 1, 5 and 25 lb are the usual boxes.

Buy 1 box.

Buy 1 box

240 sq ft + 10% waste = 264 sq ft

  • Sheets of board: 8 sheets, net area ÷ sheet area, before extra
  • Drywall screws, with extra: 264 screws, about 32 per sheet, up to 16 in apart along the framing
  • Weight if #6 × 1-1/4 in (1/2 in board, estimate): 2 lb, about 238 per lb, your pick
  • Weight if #6 × 1-5/8 in (5/8 in board, estimate): 2 lb, about 215 per lb
How this number is calculated

240 sq ft + 10% waste = 264 sq ft ÷ 1,190 sq ft per box = 1 box

Shopping list

  • Drywall screws (#6 × 1-1/4 in, coarse thread)
  • Drywall screws (#6 × 1-5/8 in, coarse thread)
  • Drywall screw setter bit
  • Drywall screw gun
  • Drywall T-square
  • Fine thread drywall screws for steel studs
Show diagram

Saved projects

No saved projects yet.

Screws per sheet and per 1,000 sq ft

Worked by this calculator before any extra. The wall rates are planning estimates attributed to USG’s handbook, the ceiling rate is the wall rate × 16 ÷ 12 (an estimate). The last three columns are per sheet.
Surface and framingMax screw spacingPer 1,000 sq ftPer 4 × 8 ft sheetPer 4 × 10 ft sheetPer 4 × 12 ft sheet
Wall, framing 16 in16 in1,000324048
Wall, framing 24 in16 in850273441
Ceiling, framing 16 in12 in1,333435364
Ceiling, framing 24 in12 in1,133364554

Screws, pounds and boxes for a number of sheets

Worked by this calculator with 4 × 8 sheets, framing 16 in on center, 10% extra and 5 lb boxes. Pounds are rounded up.
JobScrews with extraPounds of 1-1/4 inPounds of 1-5/8 inBoxes (5 lb, by board)
10 sheets of 1/2 in, walls352221
10 sheets of 5/8 in, ceiling470231
30 sheets of 1/2 in, walls1,056551
30 sheets of 5/8 in, ceiling1,408672
100 sheets of 1/2 in, walls3,52015173

Screws per box by weight (typical)

Typical counts for #6 coarse-thread bugle-head screws; brands vary by 10% or more. An estimate: the box label has the real count.
ScrewPer lb1 lb5 lb25 lb
#6 × 1-1/4 in (1/2 in board)2382381,1905,950
#6 × 1-5/8 in (5/8 in board)2152151,0755,375

Methodology & assumptions

The screw count is the board area times a screw density, plus the extra percentage, rounded up. The board area is the length times the width, minus any doors and windows you add, or, if you enter a sheet count, the sheets times the area of one sheet (32, 40 or 48 sq ft). For walls the density is the one the drywall calculator uses, from USG’s Gypsum Construction Handbook: about 1,000 screws per 1,000 sq ft of board with framing 16 in on center and 850 at 24 in, which is about 32 and 27 per 4 × 8 sheet. The Gypsum Association’s GA-216 and USG’s Sheetrock literature give the maximum screw spacing into wood or steel framing as 16 in on walls and 12 in on ceilings, so the ceiling density here is the wall density × 16 ÷ 12 (43 per 4 × 8 sheet at 16 in framing). That ratio is our estimate from the two maximum spacings and not a table value; the sheet sizes do not change the density. Pounds use typical counts for #6 coarse-thread bugle-head screws: about 238 per lb for 1-1/4 in (the count printed on a retail 1 lb pack) and about 215 per lb for 1-5/8 in (worked from the pack weights of 5,000-count cartons). Brands, coatings and head styles move these by 10% or more, so the box label wins. The length follows the board: 1-1/4 in for 1/2 in board and 1-5/8 in for 5/8 in board, so the screw goes about 5/8 in into wood framing. The result shows the weight for both lengths and takes the boxes from the board thickness you pick. Fire-rated and sound-rated assemblies set their own screw type and spacing in the tested listing (GA-600 lists them), commonly 1-5/8 in Type S screws 12 in apart, and that listing wins over this page. Double-layer work needs the count for each layer: run it once per layer, with the longer screw for the face layer. The count does not cover adhesive-assisted ceilings, steel studs (which take fine-thread Type S screws) or screws for backer board.

How to calculate how many drywall screws you need

  1. Get the area, or the sheet count. Enter the length and width of the walls or ceiling in feet, minus large openings, or just enter the number of sheets you are hanging and pick the sheet size.
  2. Pick wall or ceiling. Walls take screws up to 16 in apart along the framing, ceilings up to 12 in, so a ceiling takes about a third more.
  3. Pick the framing spacing and the board thickness. Framing 16 in on center takes about 1 screw per sq ft of wall, 24 in about 0.85. 1/2 in board takes a 1-1/4 in screw, 5/8 in board a 1-5/8 in screw.
  4. Add extra. Add about 10% for stripped heads, dropped screws and screws that miss the framing. Round up to whole screws.
  5. Convert to pounds and boxes. Divide the screws by the count per pound (about 238 for 1-1/4 in, 215 for 1-5/8 in) and divide the pounds by the box weight, rounding up.

Worked examples

ProjectResult
20 × 12 ft of wall, 1/2 in board, framing 16 in on center, 5 lb boxes of 1-1/4 in screws240 sq ft + 10% → 1 box, 264 screws, 2 lb
The same area as a ceiling, 1/2 in board (screws up to 12 in apart)240 sq ft + 10% → 1 box, 352 screws, 2 lb
The same wall with framing 24 in on center240 sq ft + 10% → 1 box, 225 screws, 1 lb
30 sheets of 4 × 8 on walls, 1/2 in board, framing 16 in on center960 sq ft + 10% → 1 boxes, 1,056 screws, 5 lb
30 sheets of 4 × 8 on a ceiling, 5/8 in board, 1-5/8 in screws960 sq ft + 10% → 2 boxes, 1,408 screws, 7 lb
60 × 24 ft of wall in 4 × 12 sheets of 5/8 in board, 25 lb box1,440 sq ft + 10% → 1 box, 1,584 screws, 8 lb

Frequently asked questions

How many screws per sheet of drywall?
About 32 on a wall and 43 on a ceiling for a 4 × 8 sheet with framing 16 in on center. USG’s handbook rate is about 1,000 screws per 1,000 sq ft of board with 16 in framing and 850 at 24 in (27 per sheet). Ceilings take more because the maximum spacing along the framing is 12 in, against 16 in on walls. Online guides range from about 30 to 70 per sheet, so treat any single figure as an estimate and see the table on this page.
How far apart should drywall screws be?
Into wood or steel framing, the maximum spacing for screws is 12 in on ceilings and 16 in on walls, per USG and the Gypsum Association’s GA-216. Nails are closer (7 in on ceilings and 8 in on walls). Keep screws about 3/8 in from the edges and ends of a sheet, and set each just below the paper surface without breaking it. A fire-rated assembly sets its own spacing, often 12 in, so follow the tested listing for it.
How many drywall screws are in a pound?
For #6 × 1-1/4 in coarse-thread screws, about 238 per pound (a 5 lb box is about 1,190). For #6 × 1-5/8 in, about 215 per pound, worked from the weight of 5,000-screw cartons. These are typical counts: head style, coating and brand shift them by 10% or more, so read the box. The 264 screws of the example weigh about 1.1 lb.
What length drywall screw do I need?
1-1/4 in for 1/2 in board and 1-5/8 in for 5/8 in board, so the screw reaches about 5/8 in into wood framing. For two layers, use the longer screw in the face layer (1-5/8 in for two layers of 1/2 in board, 2-1/4 in for two layers of 5/8 in). Steel studs take fine-thread screws, and wood takes coarse thread. The result shows pounds for both common lengths so you can compare them.
How many screws for a 4 × 12 sheet or a 4 × 10 sheet?
The density is per square foot, so the count follows the area: 48 on a 4 × 12 wall sheet and 40 on a 4 × 10 (framing 16 in on center), 64 and 53 on a ceiling. Enter a sheet count and pick the sheet size to get the total for a job. 30 sheets of 4 × 8 on walls take 1,056 screws with 10% extra.
How many boxes of drywall screws do I need?
Divide the screws you need, with extra, by the screws in a box. A 5 lb box of 1-1/4 in screws holds about 1,190, enough for roughly 33 wall sheets with 10% extra, and a 5 lb box of 1-5/8 in about 1,075. The 20 × 12 ft example takes 1 box; 30 sheets takes 1, and a 1,440 sq ft wall of 5/8 in board in 25 lb boxes takes 1. Bulk buckets are cheaper per pound for a whole house.
Do ceilings take more screws than walls?
Yes. The board hangs from the screws, so the maximum spacing is tighter: 12 in on ceilings, 16 in on walls. That is about a third more screws per sheet by this calculator’s estimate: 320 against 240 for the same 240 sq ft, before extra. On a ceiling, 1/2 in board on joists 24 in apart can sag unless it is a sag-resistant type, and many installers add adhesive or use 5/8 in board there.
Does this include screws for joint compound or tape?
No. Taping needs no screws, only compound and tape: use the joint compound calculator for those, and the drywall calculator for the sheets. This page counts screws into wood or steel framing for the board you enter. Screws for backer board, deck boards or fixtures are different fasteners.

Related calculators