Skip to main content
ponderloop

Chain Link Fence Calculator: Fabric, Posts, Rail and Fittings

A 100 ft chain link fence, 4 ft tall, with one 4 ft gate and 2 corners needs 3 rolls of 50 ft fabric (with 5% extra), 6 terminal posts, 8 line posts (at most 10 ft apart), 5 top rails of 21 ft, 8 tension bars, 24 tension bands (3 per bar), 8 brace bands, 8 rail end cups, 6 post caps, 8 loop caps, about 80 tie wires and 96 ft of tension wire.

Figures based on the sources listed belowUpdated How we calculate

Extra fabric

Each gate opening needs a terminal post on both sides, and splits the line into separate stretches of fabric.

Post to post. A walk gate is often 36–48 in; a drive gate is much wider. The gate is bought with its own fabric, so the opening is taken off the fabric run.

Each corner is a terminal post with two sets of tension bars, bands and rail ends.

Typical: a tie about every 12 in up each line post.

Typical: a tie about every 24 in along the top rail.
Tension wire keeps the bottom edge straight and stiff. Many fences use it; it is optional.

Buy 3 rolls.

Buy 3 rolls

96 linear ft + 5% waste = 100.80 linear ft

  • Terminal posts (ends, corners, gate posts): 6 posts
  • Line posts: 8 posts (spaced at most 10 ft)
  • Top rail (21 ft sticks, swedged ends): 5 sticks
  • Tension bars: 8 bars
  • Tension bands: 24 bands, 3 per bar
  • Brace bands: 8 bands
  • Rail end cups: 8 cups
  • Post caps (terminal posts): 6 caps
  • Loop caps (line posts): 8 caps
  • Tie wires (line posts and top rail): 80 ties
  • Bottom tension wire: 96 ft

Low

$240.00

Expected

$390.00

High

$660.00

Includes 4.80 linear ft waste

How this number is calculated

96 linear ft + 5% waste = 100.80 linear ft ÷ 50 linear ft per roll = 3 rolls

Next step in your project

Shopping list

  • Chain link fence fabric (50 ft roll)
  • Chain link fence tension bands and bars
  • Chain link top rail (21 ft)
  • Fence tie wires
  • Fence stretcher (come-along) and tension bar tool
  • Fast-setting concrete mix (50 lb)
Show diagram

Saved projects

No saved projects yet.

Tension bands by fence height

Bands per tension bar = fence height in ft less one, at least 3 (Hoover Fence). An end or gate post has one bar; a corner post has two, so it takes double.
Fence heightBands, end or gate postBands, corner post
3 ft36
4 ft36
5 ft48
6 ft510
7 ft612
8 ft714

Fabric, posts and rail by fence length

A straight run with one 4 ft gate and no corners, 5% extra fabric, worked by this calculator. Add terminal posts, bars, bands and caps for each corner.
Fence lengthRolls, 4 ft fabricTerminal postsLine postsTop rail sticksRolls, 6 ft fabricLine posts, 6 ftTie wires, 4 ft
50 ft14431439
100 ft34853880
150 ft44148414129
200 ft541810518170
300 ft742815728260

Methodology & assumptions

The fence is treated as one line. Fabric is the length less the gate openings (a gate is bought as a frame with its own fabric), plus the extra you choose, divided by the 50 ft roll and rounded up; rolls weave together, so the whole run is counted at once. Terminal posts are the 2 end posts, 2 gate posts for each gate and 1 post for each corner. Between terminals the line is split into (corners + gates + 1) equal stretches, and each stretch gets line posts at no more than 10 ft apart: ceil(stretch ÷ 10) − 1 posts. Real stretches are rarely equal, so a layout with one short and one long run can need a post more or fewer. Fabric is fastened to each end or gate post with one tension bar and to each corner with two, the same hook-ups that carry the rail end cups and brace bands (one of each per hook-up). Each tension bar takes one band fewer than the fence is feet tall, never fewer than 3: 3 for a 4 ft fence, 4 for 5 ft, 5 for 6 ft, and so double those at a corner, which has two bars. Every terminal post gets a post cap and every line post a loop cap for the top rail. Top rail comes in 21 ft sticks with one swedged end that telescopes into the next; about 6 in is lost at each joint, so a stick covers about 20.5 ft of fence (an estimate, and offcuts are reused). Tie wires are counted at one about every 12 in up each line post and about every 24 in along the top rail, both adjustable above, and the tension wire at the length of the fabric run. Post concrete, gate hardware, truss rods and hog rings are not counted here; use the fence post concrete calculator for the bags. Lengths in the results show in m under the metric toggle.

How to calculate chain link fence materials

  1. Measure the line. Measure the total fence length, gate openings included, and decide the fabric height. Count the gates and the corners.
  2. Find the terminal posts. Terminal posts = 2 ends + 2 for each gate + 1 for each corner. Each end or gate post has one tension bar and each corner has two.
  3. Space the line posts. Divide the run between terminals into equal stretches no longer than 10 ft apart; line posts are the spaces less one in each stretch.
  4. Count fabric and rail. Fabric = run (length less gates) plus extra, divided by 50 ft and rounded up. Top rail = run divided by about 20.5 ft per 21 ft stick.
  5. Count the fittings. Bands = bars × (height in feet less one, at least 3). One brace band and one rail end cup per bar. Post caps on terminals, loop caps on line posts, ties every 12 in on line posts and 24 in on the rail.

Worked examples

ProjectResult
100 ft fence, 4 ft tall, one 4 ft gate, 2 corners3 rolls, 6 terminal posts, 8 line posts, 5 rails, 24 tension bands
200 ft fence, 6 ft tall, two 4 ft gates, 4 corners5 rolls, 10 terminal posts, 14 line posts, 10 rails, 70 tension bands
50 ft straight run, 5 ft tall, no gate, no corners, no tension wire2 rolls, 2 terminal posts, 4 line posts, 3 rails, 8 tension bands

Frequently asked questions

How many rolls of chain link fabric do I need?
Fabric comes in 50 ft rolls. Take the gate openings off the fence length (a gate comes with its own fabric), add a few percent for trimming at the posts, and divide by 50, rounding up. For 100 ft with one 4 ft gate and 5% extra, that is 96 × 1.05 ÷ 50 = 2.02, so 3 rolls. Rolls are woven together, so a partial roll left over can be used elsewhere on the same fence. Pick the roll height to match the fence height.
How far apart should chain link line posts be?
No more than 10 ft apart, center to center. The Home Depot guide calls for a line post within every 10 ft run, and fence specifications that follow ASTM F567 use 10 ft as the maximum. Divide each stretch between terminal posts into equal spaces of 10 ft or less. Closer spacing, such as 8 ft, makes a stiffer fence in wind.
What is the difference between terminal posts and line posts?
Terminal posts carry the pull of the stretched fabric and sit at the ends, corners and either side of a gate, so they are thicker and set deeper. Line posts sit between them to hold up the top rail and fabric and are lighter. Terminal posts get post caps; line posts get loop caps that the top rail slides through.
How many tension bands per terminal post?
One fewer than the fence height in feet, and never fewer than three, on each tension bar: 3 for a 4 ft fence, 4 for 5 ft and 5 for 6 ft (Hoover Fence). An end post or gate post has one bar. A corner post has two, so it takes double: 6, 8 and 10 for 4, 5 and 6 ft fences, which matches the Home Depot guide. Space them evenly, with the bolt heads on the outside of the fence.
How many tension bars do I need?
One for each end post and each gate post, and two for each corner post, because the fabric ends on both sides of a corner. Each bar is threaded through the end of the fabric and held to the post with the tension bands.
What are brace bands and rail end cups for?
A rail end cup closes the end of the top rail where it meets a terminal post, and a brace band wraps the post just above the tension bands to hold the cup. Count one of each for every end or gate post and two for every corner post, matching the tension bars. Some manuals count the cups at end and corner posts only; a gate post usually gets one as well.
How many tie wires do I need?
Fabric is tied to each line post about every 12 in and to the top rail about every 24 in (Home Depot and Lowe’s installation guides), so a 4 ft fence takes 4 ties per line post and 1 per 2 ft of rail. The terminal posts need none, since tension bands hold the fabric there. The calculator rounds up and leaves the spacings editable; a few spares are cheap. Aluminum ties are sold in bags of 100 or more.
Do I need tension wire?
It is optional but common. A bottom tension wire runs the length of the fabric between the terminal posts and is tied to the bottom of the fabric, which keeps the edge straight and stops animals pushing under it. It needs the same footage as the fabric run. Choose "Leave out" in the calculator if you are skipping it.
How much top rail do I need?
Top rail comes in 21 ft sticks with a swedged end that slips into the next stick. About 6 in goes into each joint, so a stick covers roughly 20.5 ft (an estimate). A 96 ft run needs 96 ÷ 20.5 = 4.7, so 5 sticks. Cut sticks at the terminal posts and use the offcuts on other runs. Gate openings take no rail.

Handy tools

Related calculators