| 20 | TCP | FTP data | File Transfer Protocol data channel, used in active mode. | Plain text. Use FTPS or SFTP (SSH, port 22) instead. | File transfer | Registered with IANA |
|---|
| 21 | TCP | FTP | File Transfer Protocol control channel: login and commands. | Plain text. Explicit FTPS upgrades this port with TLS; implicit FTPS uses 990. | File transfer | Registered with IANA |
|---|
| 22 | TCP | SSH | Secure Shell: encrypted remote login, command execution and tunnelling. Also carries SFTP and SCP. | Already encrypted. | Remote access | Registered with IANA |
|---|
| 23 | TCP | Telnet | Unencrypted remote terminal login. | Sends passwords in plain text. Use SSH (22) instead. | Remote access | Registered with IANA |
|---|
| 25 | TCP | SMTP | Simple Mail Transfer Protocol: relaying mail between mail servers. | Can be upgraded with STARTTLS. Mail clients should submit on 587 or 465. | Mail | Registered with IANA |
|---|
| 43 | TCP | WHOIS | Looks up domain and IP address registration records. | Plain text. RDAP, its successor, runs over HTTPS (443). | Network management | Registered with IANA |
|---|
| 53 | TCP/UDP | DNS | Domain Name System: turns names into IP addresses. UDP for most queries, TCP for large answers and zone transfers. | Plain by default. DNS over TLS uses 853; DNS over HTTPS uses 443. | Network management | Registered with IANA |
|---|
| 67 | UDP | DHCP server | Dynamic Host Configuration Protocol: the server listens here to hand out IPv4 addresses. | No encryption. The client side uses 68. | Network management | Registered with IANA |
|---|
| 68 | UDP | DHCP client | The port a DHCP client listens on for the server’s reply. | No encryption. The server side uses 67. | Network management | Registered with IANA |
|---|
| 69 | UDP | TFTP | Trivial File Transfer Protocol: simple transfers, often for network boot and device firmware. | No login and no encryption. Keep it on trusted networks. | File transfer | Registered with IANA |
|---|
| 80 | TCP | HTTP | Hypertext Transfer Protocol: unencrypted web traffic. | Plain text. HTTPS on 443 is the encrypted version. | Web | Registered with IANA |
|---|
| 88 | TCP/UDP | Kerberos | Network authentication used by Active Directory and other single sign-on setups. | Password changes use 464. | Directory | Registered with IANA |
|---|
| 110 | TCP | POP3 | Post Office Protocol version 3: downloads mail from a server. | Plain text by default. POP3S uses 995, or upgrade with STARTTLS. | Mail | Registered with IANA |
|---|
| 111 | TCP/UDP | ONC RPC (rpcbind) | Sun RPC portmapper: tells clients which port an RPC service such as NFS listens on. | No encryption. Normally kept off the public internet. | Network management | Registered with IANA |
|---|
| 119 | TCP | NNTP | Network News Transfer Protocol: reading and posting Usenet articles. | Plain text. NNTPS uses 563. | Messaging | Registered with IANA |
|---|
| 123 | UDP | NTP | Network Time Protocol: keeps clocks in sync. | Plain UDP. Network Time Security (NTS) adds authentication. | Network management | Registered with IANA |
|---|
| 135 | TCP/UDP | Microsoft RPC endpoint mapper | DCE/RPC endpoint mapper: tells Windows clients which port an RPC service listens on. | Normally kept off the public internet. | Network management | Registered with IANA |
|---|
| 137 | UDP | NetBIOS name service | NetBIOS over TCP/IP name resolution on older Windows networks. | Legacy. SMB on 445 does not need it. | Network management | Registered with IANA |
|---|
| 138 | UDP | NetBIOS datagram service | NetBIOS datagram distribution (browsing, messaging) on older Windows networks. | Legacy. Not needed for SMB on 445. | Network management | Registered with IANA |
|---|
| 139 | TCP | NetBIOS session service | SMB file and printer sharing carried over NetBIOS on older Windows networks. | Legacy. Current SMB uses 445 directly. | File transfer | Registered with IANA |
|---|
| 143 | TCP | IMAP | Internet Message Access Protocol: reads and manages mail on the server. | Plain text by default. IMAPS uses 993, or upgrade with STARTTLS. | Mail | Registered with IANA |
|---|
| 161 | UDP | SNMP | Simple Network Management Protocol: queries to routers, switches, printers and servers. | SNMPv1 and v2c send community strings in plain text. SNMPv3 adds authentication and encryption. | Network management | Registered with IANA |
|---|
| 162 | UDP | SNMP trap | Where a manager receives SNMP traps and notifications sent by devices. | SNMPv3 can authenticate and encrypt notifications. | Network management | Registered with IANA |
|---|
| 179 | TCP | BGP | Border Gateway Protocol: exchanging routes between networks. | Sessions run between explicitly configured neighbours. | Network management | Registered with IANA |
|---|
| 389 | TCP/UDP | LDAP | Lightweight Directory Access Protocol: directory lookups and sign-in, for example against Active Directory. | Plain text unless upgraded with StartTLS. LDAPS uses 636. | Directory | Registered with IANA |
|---|
| 443 | TCP/UDP | HTTPS | HTTP over TLS: encrypted web traffic. TCP for HTTP/1.1 and HTTP/2, UDP (QUIC) for HTTP/3. | Already encrypted. | Web | Registered with IANA |
|---|
| 445 | TCP | SMB | Server Message Block: Windows file and printer sharing, directly over TCP. | SMB 3 can encrypt traffic. Normally kept off the public internet. | File transfer | Registered with IANA |
|---|
| 464 | TCP/UDP | Kerberos password change | Kerberos change-password and set-password service. | Related to Kerberos authentication on 88. | Directory | Registered with IANA |
|---|
| 465 | TCP | SMTPS (submission over TLS) | Mail submission with TLS from the first byte (implicit TLS), registered for this use by RFC 8314. | Encrypted. RFC 8314 prefers it to STARTTLS on 587. | Mail | Registered with IANA |
|---|
| 500 | UDP | IKE (ISAKMP) | Internet Key Exchange: sets up IPsec VPN tunnels. | NAT traversal moves the traffic to 4500. | Remote access | Registered with IANA |
|---|
| 514 | UDP | Syslog | Classic log forwarding. Port 514/TCP is assigned to the remote shell service (rsh), not to syslog. | No encryption. Syslog over TLS uses 6514. | Network management | Registered with IANA |
|---|
| 520 | UDP | RIP | Routing Information Protocol, versions 1 and 2. | Legacy distance-vector routing protocol. | Network management | Registered with IANA |
|---|
| 546 | UDP | DHCPv6 client | The port a DHCPv6 client listens on. | IPv6 counterpart of 68. The server side uses 547. | Network management | Registered with IANA |
|---|
| 547 | UDP | DHCPv6 server | The port DHCPv6 servers and relays listen on. | IPv6 counterpart of 67. The client side uses 546. | Network management | Registered with IANA |
|---|
| 563 | TCP | NNTPS | Network News Transfer Protocol over TLS. | Encrypted version of 119. | Messaging | Registered with IANA |
|---|
| 587 | TCP | SMTP submission | Mail clients hand outgoing mail to their provider’s server here (RFC 6409), normally after signing in. | Upgraded with STARTTLS. Implicit TLS alternative: 465. | Mail | Registered with IANA |
|---|
| 631 | TCP | IPP | Internet Printing Protocol, used by CUPS and network printers. | Encrypted variant (IPPS) uses TLS on the same port. | Other | Registered with IANA |
|---|
| 636 | TCP | LDAPS | LDAP directory queries and sign-in over TLS from the first byte. | Encrypted version of 389. | Directory | Registered with IANA |
|---|
| 853 | TCP/UDP | DNS over TLS / QUIC | Encrypted DNS: TCP for DNS over TLS (RFC 7858), UDP for DNS over QUIC (RFC 9250). | Already encrypted. | Network management | Registered with IANA |
|---|
| 873 | TCP | rsync | rsync file synchronisation daemon. | The daemon protocol is not encrypted. Running rsync over SSH (22) is the usual alternative. | File transfer | Registered with IANA |
|---|
| 989 | TCP | FTPS data (implicit TLS) | FTP data channel for implicit FTPS. | Explicit FTPS starts on port 21 instead. | File transfer | Registered with IANA |
|---|
| 990 | TCP | FTPS control (implicit TLS) | FTP control channel for implicit FTPS. | Encrypted version of 21. | File transfer | Registered with IANA |
|---|
| 993 | TCP | IMAPS | Reading and managing mail on the server over TLS from the first byte. | Encrypted version of 143. | Mail | Registered with IANA |
|---|
| 995 | TCP | POP3S | Downloading mail from the server over TLS from the first byte. | Encrypted version of 110. | Mail | Registered with IANA |
|---|
| 1080 | TCP | SOCKS proxy | SOCKS proxy for relaying TCP connections. | SOCKS5 itself does not encrypt the traffic it relays. | Other | Registered with IANA |
|---|
| 1194 | TCP/UDP | OpenVPN | OpenVPN tunnels, usually over UDP. | Encrypted with TLS. | Remote access | Registered with IANA |
|---|
| 1433 | TCP | Microsoft SQL Server | Default instance of Microsoft SQL Server. | TLS encryption is a server and client setting on the same port. | Database | Registered with IANA |
|---|
| 1434 | UDP | SQL Server Browser | Tells clients which port a named SQL Server instance listens on. | Only needed for named instances. | Database | Registered with IANA |
|---|
| 1521 | TCP | Oracle Database listener | Default listener port of Oracle Database. | TLS is configured separately in the Oracle listener. | Database | Commonly used |
|---|
| 1701 | UDP | L2TP | Layer 2 Tunneling Protocol, used for VPNs. | No encryption of its own. Usually paired with IPsec (L2TP/IPsec). | Remote access | Registered with IANA |
|---|
| 1723 | TCP | PPTP | Point-to-Point Tunneling Protocol VPN control channel. | Obsolete and considered insecure. Avoid it for new setups. | Remote access | Registered with IANA |
|---|
| 1812 | UDP | RADIUS authentication | RADIUS sign-in requests, used for Wi-Fi, VPN and network device access. | Accounting uses 1813. | Network management | Registered with IANA |
|---|
| 1813 | UDP | RADIUS accounting | RADIUS accounting records (session start, stop and usage). | Authentication uses 1812. | Network management | Registered with IANA |
|---|
| 1883 | TCP | MQTT | Lightweight publish and subscribe messaging, common for IoT devices. | Plain text. MQTT over TLS uses 8883. | Messaging | Registered with IANA |
|---|
| 1900 | UDP | SSDP (UPnP discovery) | Simple Service Discovery Protocol: finds UPnP devices on the local network. | Local network discovery; no encryption. | Network management | Registered with IANA |
|---|
| 2049 | TCP/UDP | NFS | Network File System: mounting remote directories as if they were local. | NFSv4 needs only TCP 2049. Older versions also use 111 and helper services. | File transfer | Registered with IANA |
|---|
| 2181 | TCP | Apache ZooKeeper | Default client port of Apache ZooKeeper, a coordination service used by several distributed systems. | Keep it on private networks. | Other | Commonly used |
|---|
| 2375 | TCP | Docker daemon (unencrypted) | Docker Engine remote API without TLS. | No authentication: never expose it. The TLS version uses 2376. | Other | Commonly used |
|---|
| 2376 | TCP | Docker daemon (TLS) | Docker Engine remote API protected with TLS client certificates. | Encrypted version of 2375. | Other | Commonly used |
|---|
| 2379 | TCP | etcd client | Client API of etcd, the key-value store used by Kubernetes. | etcd supports TLS on the same port. | Database | Commonly used |
|---|
| 2380 | TCP | etcd peer | Communication between etcd cluster members. | etcd supports TLS on the same port. | Database | Commonly used |
|---|
| 3000 | TCP | JavaScript dev server | Default for many local dev servers, including Create React App and Next.js. | Development use. No encryption by default. | Web | Commonly used |
|---|
| 3128 | TCP | Squid proxy | Default HTTP proxy port of the Squid caching proxy. | Proxy traffic is plain text unless the proxy is configured for TLS. | Web | Commonly used |
|---|
| 3260 | TCP | iSCSI | Block storage over IP networks (iSCSI targets). | Authentication (CHAP) is optional; use isolated storage networks. | Other | Registered with IANA |
|---|
| 3268 | TCP | LDAP global catalog | Active Directory global catalog queries across all domains in a forest. | Encrypted version uses 3269. | Directory | Commonly used |
|---|
| 3269 | TCP | LDAP global catalog over TLS | Active Directory global catalog over TLS. | Encrypted version of 3268. | Directory | Commonly used |
|---|
| 3306 | TCP | MySQL | MySQL and MariaDB client connections. | TLS is a server setting on the same port. The X Protocol uses 33060. | Database | Registered with IANA |
|---|
| 3389 | TCP/UDP | RDP | Remote Desktop Protocol for Windows desktops. TCP, with optional UDP transport. | Keep it off the public internet: use a VPN or Remote Desktop Gateway. | Remote access | Registered with IANA |
|---|
| 3690 | TCP | Subversion (svnserve) | Subversion server protocol (svn://). | Not encrypted by itself. Use svn+ssh or HTTPS. | Other | Registered with IANA |
|---|
| 4200 | TCP | Angular dev server | Default of the Angular CLI development server (ng serve). | Development use. No encryption by default. | Web | Commonly used |
|---|
| 4321 | TCP | Astro dev server | Default of the Astro development server. | Development use. No encryption by default. | Web | Commonly used |
|---|
| 4500 | UDP | IPsec NAT traversal | IPsec traffic and IKE when a NAT device sits between the peers. | Companion of 500. | Remote access | Registered with IANA |
|---|
| 5060 | TCP/UDP | SIP | Session Initiation Protocol: sets up voice and video calls. | Plain text. SIP over TLS uses 5061. | Messaging | Registered with IANA |
|---|
| 5061 | TCP | SIP over TLS | SIP signalling over TLS. | Encrypted version of 5060. | Messaging | Registered with IANA |
|---|
| 5173 | TCP | Vite dev server | Default of the Vite development server. | Development use. No encryption by default. | Web | Commonly used |
|---|
| 5222 | TCP | XMPP client | Chat clients connecting to an XMPP (Jabber) server. | Upgraded with STARTTLS. | Messaging | Registered with IANA |
|---|
| 5269 | TCP | XMPP server | XMPP servers talking to each other. | Upgraded with STARTTLS. | Messaging | Registered with IANA |
|---|
| 5353 | UDP | mDNS | Multicast DNS: resolves .local names on the local network (Bonjour, Avahi). | Local network only. | Network management | Registered with IANA |
|---|
| 5432 | TCP | PostgreSQL | PostgreSQL client connections. | TLS is a server setting on the same port. | Database | Registered with IANA |
|---|
| 5601 | TCP | Kibana | Default web interface port of Kibana. | Plain HTTP unless TLS is configured. | Web | Commonly used |
|---|
| 5671 | TCP | AMQPS | AMQP 0-9-1 and 1.0 over TLS. | Encrypted version of 5672. | Messaging | Registered with IANA |
|---|
| 5672 | TCP | AMQP | Advanced Message Queuing Protocol, used by RabbitMQ and other brokers. | Plain by default. AMQPS uses 5671. | Messaging | Registered with IANA |
|---|
| 5900 | TCP | VNC | Remote Frame Buffer (VNC) remote desktop, first display. Further displays use 5901 and up. | The session is not encrypted by the basic protocol. Tunnel it through SSH or a VPN. | Remote access | Registered with IANA |
|---|
| 5984 | TCP | CouchDB | Apache CouchDB HTTP API. | Plain HTTP unless TLS is configured. | Database | Commonly used |
|---|
| 5985 | TCP | WinRM (HTTP) | Windows Remote Management, used by PowerShell remoting. | HTTPS version uses 5986. | Remote access | Registered with IANA |
|---|
| 5986 | TCP | WinRM (HTTPS) | Windows Remote Management over TLS. | Encrypted version of 5985. | Remote access | Registered with IANA |
|---|
| 6379 | TCP | Redis | Default port of the Redis in-memory data store. | Plain by default. TLS is available from Redis 6. | Database | Commonly used |
|---|
| 6443 | TCP | Kubernetes API server | Default secure port of the Kubernetes API server. | Served over HTTPS. | Other | Commonly used |
|---|
| 6514 | TCP | Syslog over TLS | Syslog messages over TLS (RFC 5425). | Encrypted alternative to 514. | Network management | Registered with IANA |
|---|
| 6667 | TCP | IRC | Internet Relay Chat servers, plain text. | TLS usually uses 6697. | Messaging | Commonly used |
|---|
| 6697 | TCP | IRC over TLS | Internet Relay Chat over TLS (RFC 7194). | Encrypted version of 6667. | Messaging | Registered with IANA |
|---|
| 7687 | TCP | Neo4j Bolt | Bolt protocol of the Neo4j graph database. | Encryption is a setting on the same port. | Database | Commonly used |
|---|
| 8000 | TCP | Python and Django dev server | Default of python -m http.server and the Django development server. | Development use. No encryption by default. | Web | Commonly used |
|---|
| 8080 | TCP | HTTP alternate | Alternative HTTP port, common for proxies, application servers and local testing. | Plain text. 8443 is the usual HTTPS counterpart. | Web | Registered with IANA |
|---|
| 8086 | TCP | InfluxDB | HTTP API of the InfluxDB time-series database. | Plain HTTP unless TLS is configured. | Database | Commonly used |
|---|
| 8443 | TCP | HTTPS alternate | Alternative HTTPS port, common for admin consoles and application servers. | Encrypted counterpart of 8080. | Web | Commonly used |
|---|
| 8883 | TCP | MQTT over TLS | MQTT messaging over TLS. | Encrypted version of 1883. | Messaging | Registered with IANA |
|---|
| 8888 | TCP | Jupyter | Default port of Jupyter Notebook and JupyterLab. | Development use. Protect it with the access token. | Web | Commonly used |
|---|
| 9042 | TCP | Cassandra (CQL) | Client port of Apache Cassandra for the Cassandra Query Language. | Encryption is a server setting on the same port. | Database | Commonly used |
|---|
| 9090 | TCP | Prometheus | Web interface and API of the Prometheus monitoring server. | Plain HTTP unless TLS is configured. | Network management | Commonly used |
|---|
| 9092 | TCP | Apache Kafka | Default broker port of Apache Kafka. | Plain text unless TLS listeners are configured. | Messaging | Commonly used |
|---|
| 9100 | TCP | Node Exporter | Default of Prometheus Node Exporter. Many network printers also accept raw print jobs here. | Plain HTTP unless TLS is configured. | Network management | Commonly used |
|---|
| 9200 | TCP | Elasticsearch (HTTP) | REST API of Elasticsearch. | TLS and authentication depend on the Elasticsearch security settings. | Database | Commonly used |
|---|
| 9300 | TCP | Elasticsearch (transport) | Node-to-node transport between Elasticsearch cluster members. | Keep it on private networks. | Database | Commonly used |
|---|
| 9418 | TCP | Git protocol | git:// read-only transport. | No encryption or authentication. HTTPS or SSH are the usual choices. | Other | Registered with IANA |
|---|
| 10250 | TCP | Kubelet API | API of the kubelet agent on each Kubernetes node. | Served over HTTPS. | Other | Commonly used |
|---|
| 11211 | TCP/UDP | Memcached | Default port of the Memcached cache. | No built-in authentication in the default setup. Keep it on private networks. | Database | Commonly used |
|---|
| 15672 | TCP | RabbitMQ management | Web interface and HTTP API of the RabbitMQ management plugin. | Plain HTTP unless TLS is configured. | Messaging | Commonly used |
|---|
| 25565 | TCP | Minecraft (Java Edition) | Default server port of Minecraft Java Edition. | Game traffic. | Other | Commonly used |
|---|
| 27017 | TCP | MongoDB | Default port of MongoDB servers. | TLS is a server setting on the same port. | Database | Commonly used |
|---|
| 33060 | TCP | MySQL X Protocol | MySQL X Protocol, used by the MySQL Shell and X DevAPI. | TLS is a server setting on the same port. | Database | Commonly used |
|---|
| 51820 | UDP | WireGuard | Conventional listen port for WireGuard VPN tunnels; the port is configurable. | Encrypted. Sits in the dynamic range, which IANA does not assign. | Remote access | Commonly used |
|---|