Skip to main content
ponderloop

Half-Life Calculator

With a half-life of 5 days, 100 g decays to 18.9465 g after 12 days: that is 2.4 half-lives, so 18.9465% is left. Pick what to solve for (the remaining quantity, the initial quantity, the elapsed time or the half-life) and the calculator also gives the decay constant (0.138629 per day), the mean lifetime (7.21348 days) and the time to fall to any level, here 16.6096 days to reach 10%. A doubling-time switch covers exponential growth.

Updated Runs in your browser: nothing you enter is uploadedHow this tool works

Solve for

Same formula with the exponent’s sign flipped: N(t) = N₀ × 2^(t / T).

Any label (g, mg, atoms, cells): it is only echoed back.

N(t) = 100 g × (1/2)^(12 days / 5 days) =

18.9465 g

12 days is 2.4 half-lives of 5 days: 18.9465 g of the initial 100 g is left, which is 18.9465%.

Initial quantity
100 g
Remaining quantity
18.9465 g
Elapsed time
12 days
Half-life
5 days
Half-lives elapsed (t / T)
2.4
Fraction remaining N(t) / N₀
0.189465
Percent remaining
18.9465%
Percent decayed
81.0535%
Decay constant λ = ln 2 / T
0.138629 per day
Decay constant in SI
1.60451 × 10⁻⁶ s⁻¹
Mean lifetime τ = 1 / λ
7.21348 days
Time to fall to 10%
16.6096 days

Step by step

  1. Half-lives elapsed: n = t / T = 12 / 5 = 2.4.
  2. Fraction remaining: (1/2)^n = (1/2)^2.4 = 0.189465.
  3. N(t) = N₀ × 0.189465 = 100 g × 0.189465 = 18.9465 g.
  4. Decay constant λ = ln 2 / T = 0.693147 / 5 days = 0.138629 per day; mean lifetime τ = 1 / λ = 7.21348 days.

Precision and assumptions

  • Calculated in double precision (about 15 to 16 significant digits) and shown to 6 significant figures.
  • The model gives the expected amount for a large sample. It never reaches exactly zero, and it does not depend on the starting amount.

Fraction left after 0 to 10 half-lives

Exact values: after k half-lives the fraction left is 1/2^k, an exact decimal, so nothing is rounded.
Half-livesFraction leftDecimalPercent leftPercent decayed
011100%0%
11/20.550%50%
21/40.2525%75%
31/80.12512.5%87.5%
41/160.06256.25%93.75%
51/320.031253.125%96.875%
61/640.0156251.5625%98.4375%
71/1280.00781250.78125%99.21875%
81/2560.003906250.390625%99.609375%
91/5120.0019531250.1953125%99.8046875%
101/10240.00097656250.09765625%99.90234375%

How many half-lives to reach a level

Half-lives needed = log₂(100 / p) and mean lifetimes needed = ln(100 / p) for p percent left, shown to 6 significant figures.
Percent leftPercent decayedHalf-lives neededMean lifetimes needed
90%10%0.1520030.105361
75%25%0.4150370.287682
50%50%10.693147
25%75%21.38629
10%90%3.321932.30259
1%99%6.643864.60517

Worked examples

Each line is run through the calculator; the quantity and times are made-up samples.
QuestionFormula with the numbersAnswer
How much is left after 12 days?N(t) = 100 g × (1/2)^(12 days / 5 days)18.9465 g
How much was there at the start?N₀ = 12.5 g ÷ (1/2)^(15 days / 5 days)100 g
How long until 80 mg becomes 5 mg?t = 4 hours × log₂(80 mg / 5 mg)16 hours
What half-life takes 100 g to 37 g in 10 days?T = 10 days ÷ log₂(100 g / 37 g)6.97154 days
Half-life in hours, time in daysN(t) = 100 g × (1/2)^(1 day / 2 hours)0.0244141 g
How long until 1% is left with a 30-year half-life?N(t) = 100 g × (1/2)^(1 year / 30 years)199.316 years
Cells doubling every 20 minutes, after 3 hoursN(t) = 1,000 cells × 2^(3 hours / 20 minutes)512,000 cells
What doubling time takes 1,000 to 5,000 in 6 hours?T = 6 hours ÷ log₂(5,000 cells / 1,000 cells)2.58406 hours

Typical half-lives of well-known nuclides

Typical values, rounded: the half-life column is rounded and the other two columns are worked out from it. For precise decay data use a nuclear data table.
NuclideHalf-life (typical, rounded)Mean lifetime τTime to fall to 1%
Technetium-99m6 hours8.65617 hours39.8631 hours
Radon-2223.8 days5.48224 days25.2467 days
Iodine-1318.02 days11.5704 days53.2837 days
Cobalt-605.27 years7.603 years35.0131 years
Tritium (hydrogen-3)12.3 years17.7451 years81.7194 years
Caesium-13730 years43.2809 years199.316 years
Carbon-145,730 years8,266.64 years38,069.3 years
Radium-2261,600 years2,308.31 years10,630.2 years
Uranium-2384,470,000,000 years6,448,850,000 years29,698,000,000 years

Time units the calculator converts

Exact lengths used for the conversion; a year is the Julian year of 365.25 days.
UnitSecondsDays
seconds11.15741 × 10⁻⁵
minutes606.94444 × 10⁻⁴
hours3,6000.0416667
days86,4001
weeks604,8007
years31,557,600365.25

How to calculate a half-life or decayed amount

  1. Choose what to solve for. Pick the remaining quantity, the initial quantity, the elapsed time or the half-life. That field is hidden because the calculator fills it in.
  2. Enter the other three values. Type numbers such as 100, 2.5 or 1e-3. Commas are ignored. Type any quantity unit you like (g, mg, atoms) and it is only echoed back.
  3. Set the time units. Choose seconds, minutes, hours, days, weeks or years for the elapsed time and for the half-life separately; they are converted exactly before dividing.
  4. Read the result. The headline is the value you solved for. Below it are the half-lives elapsed, the fraction and percent left, the decay constant, the mean lifetime and the time to reach your target level.
  5. Switch to growth if needed. Tick the growth box to use a doubling time instead of a half-life: the same formula with the exponent’s sign flipped.

Frequently asked questions

How do you calculate half-life?
Use N(t) = N₀ × (1/2)^(t / T), where T is the half-life. Solving for T gives T = t / log₂(N₀ / N(t)). For the example, 100 g falling to 18.9465 g in 12 days gives T = 5 days. A quick sanity check: the quantity halves every T, so after 2.4 half-lives the fraction left is 0.189465.
How do I find the amount remaining after some time?
Divide the elapsed time by the half-life to get the number of half-lives n, then multiply the initial amount by (1/2)^n. N(t) = 100 g × (1/2)^(12 days / 5 days) = 18.9465 g. The elapsed time and half-life can be in different units (N(t) = 100 g × (1/2)^(1 day / 2 hours) = 0.0244141 g), because both are converted to seconds first.
How do I find the initial amount from what is left?
Reverse the formula: N₀ = N(t) ÷ (1/2)^(t / T). If 12.5 g is left after 15 days with a 5 days half-life, that is 3 half-lives, so the amount at the start was 100 g. Choose “Initial quantity” under Solve for.
How long does it take to decay to a given percent?
The time to fall to p percent is T × log₂(100 / p). With a 5-day half-life it takes 16.6096 days to reach 10%, which is 3.32193 half-lives. The target field in the calculator gives this time for any level, and the table of half-lives to reach a level lists 90%, 75%, 50%, 25%, 10% and 1%.
How many half-lives until almost nothing is left?
After 3 half-lives 1/8 is left (12.5%). After 10 half-lives 1/1024 is left, which is 0.0009765625 as a decimal or 0.09765625%. Falling to 1% takes 6.64386 half-lives. The fraction never reaches zero in the model, so “almost nothing” depends on the level you care about.
What are the decay constant and the mean lifetime?
The decay constant is λ = ln 2 / T, the fraction lost per unit of time at the start, and the mean lifetime is τ = 1 / λ = T / ln 2, which is about 1.4427 times the half-life. For a 5-day half-life, λ = 0.138629 per day and τ = 7.21348 days. The same decay can be written N(t) = N₀ × e^(−λt), and after one mean lifetime about 36.8% remains while after one half-life exactly 50% remains.
Does the half-life depend on how much I start with?
No. In exponential decay every amount loses the same fraction in the same time, so a larger sample takes exactly as long to halve as a smaller one. The model describes the expected amount of a large sample: it never reaches exactly zero, although a real sample of whole atoms eventually has none left.
How do I use the calculator for growth and doubling time?
Tick the growth box. The formula becomes N(t) = N₀ × 2^(t / T), with T the doubling time. For 1,000 cells doubling every 20 minutes, after 3 hours there are 512,000 cells (9 doublings). Going the other way, T = 6 hours ÷ log₂(5,000 g / 1,000 g) gives a doubling time of 2.58406 hours. For money, the rule of 72 calculator estimates doubling time from an interest rate.
How does the calculator convert time units?
Each time is converted to seconds with exact factors: a minute is 60 s, an hour 3,600 s, a day 86,400 s, a week 604,800 s and a year the Julian year of 365.25 days, 31,557,600 s. The number of half-lives is the ratio of the two times in seconds, so N(t) = 100 g × (1/2)^(1 day / 2 hours) is worked out as 12 half-lives. A calendar year of 365 days would be 0.068% shorter, which shifts any result that counts years by about that much.
How does radiocarbon-style dating use this formula?
An age comes from the fraction left: t = T × log₂(N₀ / N). With a half-life of 5,730 years and 25% left, t = 5,730 years × log₂(100 % / 25 %) = 11,460 years, which is exactly two half-lives. Real radiocarbon dating also needs calibration for changes in atmospheric carbon over time, which this calculator does not do.
What else decays exponentially?
Any first-order process has a half-life: the voltage across a discharging capacitor falls as e^(−t / RC), so it halves after RC × ln 2 ≈ 0.693147 × RC; the excess temperature of a cooling object follows Newton’s law of cooling; and a first-order chemical reaction has t½ = ln 2 / k. Enter the half-life of whichever process you have, and the quantity label is only echoed.
How precise are the results?
Calculations use double-precision floating point, about 15 to 16 significant digits, and results are shown to 6 significant figures. Unit conversions are exact, and when the number of half-lives is a whole number to within one part in a trillion it is treated as exact, so the fraction shows as 1/8 rather than a long float tail. Inputs above 1,000 half-lives are refused because the result no longer fits a double.

How it works

The calculator uses the exponential decay law N(t) = N₀ × 2^(−t / T), equivalent to N₀ × e^(−λt) with λ = ln 2 / T, and for growth N(t) = N₀ × 2^(t / T). The elapsed time and the half-life are converted to seconds with exact factors (a year is the Julian year of 365.25 days) and divided to get the number of half-lives n. The remaining and initial quantities follow from 2^(−n); the elapsed time and the half-life are found with a base-2 logarithm, n = log₂(N₀ / N), then t = n × T or T = t / n. The mean lifetime is T / ln 2. Arithmetic is IEEE double precision, shown to 6 significant figures; the tables of fractions after 0 to 10 half-lives are exact (BigInt powers of 5 and 10), and the half-lives to reach a level use Math.log2 and Math.log. The quantity unit is a text label that is only echoed. The page describes a mathematical model of a large sample and is not guidance for handling any material.

Sources

More: Algebra and number theoryAll math & numbersAll toolsHome & DIY calculators