Fraction, Decimal and Percent Converter
3/8 is 0.375 as a decimal and 37.5% as a percent: divide 3 by 8 for the decimal, then multiply by 100 for the percent. Type any one of a fraction (3/8 or a mixed number like 1 3/8), a decimal (0.375, or 0.(3) for a repeating one) or a percent (37.5%) and the converter shows the other two exactly, with the fraction in lowest terms, the mixed number and whether the decimal ends or repeats. A fraction such as 1/3 never ends, so it is written 0.(3) = 33.(3)%: the digits in brackets repeat forever, found by long division rather than rounded.
Updated Runs in your browser: nothing you enter is uploadedHow this tool works
Read as the fraction 3/8
3/8 = 0.375 = 37.5%
The decimal ends after 3 places: the denominator 8 = 2^3 has no prime factors except 2 and 5.
- Fraction
- 3/8
- Decimal
- 0.375
- Percent
- 37.5%
- Decimal type
- Ends after 3 places
The working, step by step
- Simplify: GCD(3, 8) = 1, so 3/8 is already in lowest terms.
- Divide the top by the bottom: 3/8 = 3 ÷ 8 = 0.375.
- The decimal ends: the denominator 8 = 2^3 has no prime factors except 2 and 5, so long division reaches remainder 0 after 3 digits.
- Multiply by 100: 3/8 × 100 = 75/2 = 37.5%.
Fractions from 1/2 to 1/16 as decimals and percents
| Fraction | Decimal | Percent | Decimal type |
|---|---|---|---|
| 1/2 | 0.5 | 50% | Ends after 1 place |
| 1/3 | 0.(3) | 33.(3)% | Repeats |
| 1/4 | 0.25 | 25% | Ends after 2 places |
| 1/5 | 0.2 | 20% | Ends after 1 place |
| 1/6 | 0.1(6) | 16.(6)% | Repeats |
| 1/7 | 0.(142857) | 14.(285714)% | Repeats |
| 1/8 | 0.125 | 12.5% | Ends after 3 places |
| 1/9 | 0.(1) | 11.(1)% | Repeats |
| 1/10 | 0.1 | 10% | Ends after 1 place |
| 1/11 | 0.(09) | 9.(09)% | Repeats |
| 1/12 | 0.08(3) | 8.(3)% | Repeats |
| 1/13 | 0.(076923) | 7.(692307)% | Repeats |
| 1/14 | 0.0(714285) | 7.(142857)% | Repeats |
| 1/15 | 0.0(6) | 6.(6)% | Repeats |
| 1/16 | 0.0625 | 6.25% | Ends after 4 places |
Thirds, sixths and eighths as decimals and percents
| Fraction | Decimal | Percent | Percent to 2 places |
|---|---|---|---|
| 1/3 | 0.(3) | 33.(3)% | 33.33% |
| 2/3 | 0.(6) | 66.(6)% | 66.67% |
| 1/6 | 0.1(6) | 16.(6)% | 16.67% |
| 5/6 | 0.8(3) | 83.(3)% | 83.33% |
| 1/8 | 0.125 | 12.5% | 12.50% |
| 3/8 | 0.375 | 37.5% | 37.50% |
| 5/8 | 0.625 | 62.5% | 62.50% |
| 7/8 | 0.875 | 87.5% | 87.50% |
Common percents as fractions and decimals
| Percent | Fraction | Decimal | Mixed number |
|---|---|---|---|
| 5% | 1/20 | 0.05 | 1/20 |
| 10% | 1/10 | 0.1 | 1/10 |
| 12.5% | 1/8 | 0.125 | 1/8 |
| 20% | 1/5 | 0.2 | 1/5 |
| 25% | 1/4 | 0.25 | 1/4 |
| 33.(3)% | 1/3 | 0.(3) | 1/3 |
| 37.5% | 3/8 | 0.375 | 3/8 |
| 40% | 2/5 | 0.4 | 2/5 |
| 50% | 1/2 | 0.5 | 1/2 |
| 60% | 3/5 | 0.6 | 3/5 |
| 62.5% | 5/8 | 0.625 | 5/8 |
| 66.(6)% | 2/3 | 0.(6) | 2/3 |
| 75% | 3/4 | 0.75 | 3/4 |
| 80% | 4/5 | 0.8 | 4/5 |
| 87.5% | 7/8 | 0.875 | 7/8 |
| 100% | 1 | 1 | 1 |
| 125% | 5/4 | 1.25 | 1 1/4 |
| 150% | 3/2 | 1.5 | 1 1/2 |
Worked examples: any form in, all three out
| You enter | Read as | Fraction | Decimal | Percent | Mixed number |
|---|---|---|---|---|---|
| 3/8 | fraction 3/8 | 3/8 | 0.375 | 37.5% | 3/8 |
| 1 3/8 | mixed number 1 3/8 | 11/8 | 1.375 | 137.5% | 1 3/8 |
| 0.375 | decimal 0.375 | 3/8 | 0.375 | 37.5% | 3/8 |
| 37.5% | percent 37.5% | 3/8 | 0.375 | 37.5% | 3/8 |
| 0.(3) | repeating decimal 0.(3) | 1/3 | 0.(3) | 33.(3)% | 1/3 |
| 0.1(6) | repeating decimal 0.1(6) | 1/6 | 0.1(6) | 16.(6)% | 1/6 |
| 125% | percent 125% | 5/4 | 1.25 | 125% | 1 1/4 |
| 7/12 | fraction 7/12 | 7/12 | 0.58(3) | 58.(3)% | 7/12 |
How long the repeating block of 1/n gets
| Fraction | Decimal | Digits before the block | Block length |
|---|---|---|---|
| 1/3 | 0.(3) | 0 | 1 digit |
| 1/6 | 0.1(6) | 1 | 1 digit |
| 1/7 | 0.(142857) | 0 | 6 digits |
| 1/11 | 0.(09) | 0 | 2 digits |
| 1/13 | 0.(076923) | 0 | 6 digits |
| 1/17 | 0.058823529411… | 0 | 16 digits |
| 1/19 | 0.052631578947… | 0 | 18 digits |
| 1/23 | 0.043478260869… | 0 | 22 digits |
| 1/29 | 0.034482758620… | 0 | 28 digits |
| 1/97 | 0.010309278350… | 0 | 96 digits |
How to convert between fractions, decimals and percents
- Type one of the three. Enter a fraction (3/8, or a mixed number like 1 3/8), a decimal (0.375, or 0.(3) for a repeating one) or a percent (37.5%). The converter reads a % sign as a percent, a bar as a fraction and anything else as a decimal; the menu next to the box overrides that.
- Fraction to decimal. Divide the top by the bottom: 3/8 is 3 ÷ 8 = 0.375. If the division never reaches a remainder of 0, the decimal repeats, like 1/6 = 0.1(6).
- Decimal to fraction. Count the digits after the point and write the digits over 1 followed by that many zeros: 0.375 = 375/1000, then divide the top and bottom by their greatest common divisor to get 3/8. A repeating decimal such as 0.1(6) uses the shift-and-subtract trick and gives 1/6.
- Fraction or decimal to percent. Multiply by 100: 0.375 × 100 = 37.5%, and 1/3 × 100 = 33.(3)%. Going the other way, divide the percent by 100: 37.5% is 37.5/100 = 3/8.
- Read the repeating block. Digits in brackets repeat forever: 0.(142857) is 0.142857142857… and equals 1/7. The result panel names the block, its length and how many digits come before it.
Frequently asked questions
- How do you convert a fraction to a decimal and a percent?
- Divide the numerator by the denominator for the decimal, then multiply the decimal by 100 for the percent. For 3/8: 3 ÷ 8 = 0.375, and 0.375 × 100 = 37.5%. To work it exactly, multiply the fraction itself by 100: 3/8 × 100 = 75/2 = 37.5%. A mixed number is converted as a whole: 1 3/8 is 11/8 = 1.375 = 137.5%.
- How do you convert a decimal to a fraction?
- Write the digits after the point over 1 followed by as many zeros, then simplify. 0.375 has three digits after the point, so it is 375/1000, and dividing both by their greatest common divisor, 125, gives 3/8. In the same way 0.72 is 72/100 = 18/25. A decimal with a whole part keeps it: 2.5 is 5/2, or 2 1/2 as a mixed number.
- How do you convert a percent to a fraction?
- A percent is a number out of 100, so write it over 100 and simplify: 37.5% is 37.5/100, which is 375/1000 once the decimal point is cleared, or 3/8 in lowest terms. 125% is 5/4, or 1 1/4 as a mixed number, and a percent with a fraction in it works too: 12 1/2% is 1/8. Percents over 100% come out as improper fractions or mixed numbers.
- How can I tell whether a fraction gives an ending or a repeating decimal?
- Reduce the fraction first, then look at the denominator. If its only prime factors are 2 and 5, the decimal ends; any other prime factor makes it repeat. The denominator 8 = 2³ gives 0.375, but 12 = 2² × 3 keeps a 3, so 1/12 = 0.08(3). Reducing matters: 6/16 looks like it could go either way, but it is 3/8, which is 0.375 and ends. The number of digits before the repeating block is the larger of the powers of 2 and 5 in the denominator: 2 for 1/12.
- How is a repeating decimal turned into a fraction?
- Shift the point past one block and past none, then subtract so the repeating part cancels. For 0.1(6), let x = 0.1666…: 100x = 16.666… and 10x = 1.666…, so 90x = 15 and x = 15/90 = 1/6. For 0.(142857) the block is six digits, so 999999x = 142857 and x = 142857/999999 = 1/7. The converter shows these steps under the result.
- Is 0.999… equal to 1?
- Yes. 0.(9) means 0.999… with the nines going on forever. With x = 0.(9), 10x − x = 9, so x = 9/9 = 1. Typed into the converter, 0.(9) returns 1 = 1 = 100%. A finite 0.999 is not the same: it is 999/1000.
- Why is 33.33% not exactly one third?
- Because 33.33% ends and one third does not. 33.33% is 3333/10000, a little under 1/3, whose exact percent is 33.(3)%. Use 33.(3)% or write the fraction when exactness matters, and round only at the end. The converter shows both: 1/3 = 0.(3) = 33.(3)%, and a rounded line such as “≈ 33.33%” for reading.
- How long can the repeating block be?
- For a fraction in lowest terms with denominator n, the block has at most n − 1 digits, because long division can only meet n − 1 different non-zero remainders before one repeats. Some denominators reach that limit: 1/7 has a block of 6 digits (0.(142857)), 1/17 a block of 16 digits (0.(0588235294117647)) and 1/97 a block of 96 digits. Others are much shorter: 1/11 has a block of 2 digits (0.(09)) and 1/13 a block of 6 digits (0.(076923)). The converter searches up to 300 digits and says so when a block is longer than that.
- Can I type 0.333… with dots?
- Yes. A decimal ending in three dots or an ellipsis is read with its last digit repeating, so 0.333… is 0.(3) = 1/3. Without the dots, 0.333 is the ending decimal 333/1000. For a block of more than one digit put it in brackets, as in 0.(142857), so there is no doubt about which digits repeat.
- What about negative numbers and whole numbers?
- Put a minus sign in front: −3/8 = −0.375 = −37.5%. The sign applies to all three forms. A whole number is a fraction over 1, so choosing Fraction and typing 4 gives 4 = 4 = 400%. Zero is 0 = 0 = 0% and has no sign.
- Which tool should I use for tape-measure fractions or for fraction arithmetic?
- To round a decimal length to the nearest 1/16 or 1/32 of an inch, use the decimal to fraction converter. To add, subtract, multiply or divide fractions, use the fraction calculator. To find a percentage of a number or a percent change, use the percentage calculator or the percent change calculator. This page is for the exact equivalents of one number in all three forms.
- How big a number can I enter?
- Each number in a fraction or percent can have up to 30 digits, and a decimal up to 120 digits, enough to paste back the block of 96 digits that the converter prints for 1/97. All arithmetic uses whole-number fractions, so there is no floating-point error and nothing is rounded except the lines marked ≈.
How it works
Every number is held as an exact fraction of two whole numbers, never as a binary floating-point number. A fraction a/b or mixed number w a/b is read as (w × b + a)/b; a decimal with k digits after the point is its digits over 10^k; a repeating decimal x = w.f(r), with k digits in f and m in r, satisfies 10^(k+m)x − 10^k x = (the digits w f r) − (the digits w f), so x is that difference over 10^k × (10^m − 1); a percent p% is p/100. Each result is reduced to lowest terms by dividing top and bottom by their greatest common divisor (Euclid’s algorithm). The decimal of a fraction is found by long division, remembering the remainder after each digit: a remainder of 0 means the decimal ends, and a remainder that comes round again means the digits since it first appeared repeat forever, so the block is exact, not a rounding. Because there are only n − 1 non-zero remainders for a denominator n, the block has at most n − 1 digits. The decimal ends exactly when the denominator, in lowest terms, has no prime factor except 2 and 5; the number of digits before the repeating block is the larger of the powers of 2 and 5 in the denominator, and the block length is the multiplicative order of 10 modulo what is left of the denominator. The percent is the value multiplied by 100 and expanded the same way. Detection: a % sign means percent, a / means fraction (or a mixed number when a whole number and a space come first), anything else is a decimal; three dots or an ellipsis after a decimal repeats its last digit. Limits: up to 30 digits in each number of a fraction or percent, 120 in a decimal, and a search of 300 digits for the repeating block (a longer block is reported as such and its first 16 digits shown). Lines marked ≈ are rounded displays; everything else is exact. The page was checked against independent values from Python’s fractions module and integer arithmetic.
Sources
More free tools
- Percent Change CalculatorPercent increase or decrease from an old to a new value, a number raised or cut by x%, the original value, percentage points, chained changes and CAGR.
- Decimal to Fraction ConverterTurn a decimal like 0.375 or 0.1(6) into an exact fraction, or round inches to the nearest 1/16 or 1/32 on a tape measure, with the working shown.
- Fraction CalculatorAdd, subtract, multiply and divide fractions and mixed numbers like 2 3/8 + 1 5/16, simplify, and convert to decimals, with every step shown.
- Percentage CalculatorWork out X% of Y, what percent X is of Y, percentage change, a % increase or decrease, and the original before a discount, with the formula shown.
- Ratio & Proportion CalculatorSolve a/b = c/d for x by cross-multiplication with the steps shown, simplify a ratio like 6:9:15, or split a total in a ratio such as 120 in 2:3:5.
- Number to Words ConverterWrite any number in words: digits, decimals, negatives, check amounts and ordinals, with optional British “and”. Exact up to 66 digits.
More: Percent, fractions and arithmeticAll math & numbersAll toolsHome & DIY calculators