Skip to main content
ponderloop

Depreciation Calculator

An asset that costs $50,000.00 with a $5,000.00 salvage value and a 5-year life depreciates $9,000.00 a year on a straight-line basis: $45,000.00 in all, taking the book value from $50,000.00 down to $5,000.00. Other methods spread the same $45,000.00 differently: double declining balance charges $20,000.00 in year 1 and sum-of-the-years’ digits $15,000.00. Enter the cost, salvage value and useful life in whole years, pick a method, and the calculator gives the annual depreciation, accumulated depreciation and book value for every year, a side-by-side comparison of all five methods and a CSV download; the first year is a full year, as partial first years are not supported. These are accounting definitions, an estimate for planning and not tax or accounting advice.

Updated Runs in your browser: nothing you enter is uploadedHow this tool works

The asset is treated as in service for the whole of year 1: a partial first year is not supported. Amounts are rounded to the cent.

Annual depreciation $9,000.00

$45,000.00 depreciated over 5 years: book value falls from $50,000.00 to $5,000.00.

Method
Straight-line
Depreciable base (cost − salvage)
$45,000.00
Useful life
5 years
Annual depreciation
$9,000.00
Annual rate
20%
Book value after year 1
$41,000.00
Total (accumulated) depreciation
$45,000.00
Book value after year 5
$5,000.00

Each year’s exact share is rounded down to the cent and the leftover cents go to the years with the largest remainders (ties to the earlier year), so every year is within one cent of its exact share and the charges add up to the depreciable base exactly.

An estimate using accounting definitions, not tax or accounting advice.

Depreciation schedule

Straight-line: depreciation, accumulated depreciation and book value by year.
YearDepreciationAccumulated depreciationBook value
1$9,000.00$9,000.00$41,000.00
2$9,000.00$18,000.00$32,000.00
3$9,000.00$27,000.00$23,000.00
4$9,000.00$36,000.00$14,000.00
5$9,000.00$45,000.00$5,000.00

All methods side by side

Year 1, final-year and total depreciation under each method, for the same cost, salvage value and life.
MethodYear 1Final yearTotal depreciation
Straight-line$9,000.00$9,000.00$45,000.00
Declining balance (150%)$15,000.00$7,005.00$45,000.00
Double declining balance$20,000.00$1,480.00$45,000.00
Sum-of-the-years’ digits$15,000.00$3,000.00$45,000.00
Units of production$10,800.00$7,200.00$45,000.00

Eight worked examples

Each row is an asset run through the calculator with one method: year 1, year 2 and final-year depreciation and the total over the life. The first year is a full year; amounts are exact to the cent.
Asset and inputsMethodYear 1Year 2Final yearTotal depreciation
Delivery van: $38,000.00 cost, $4,000.00 salvage, 6 yearsStraight-line$5,666.67$5,666.67$5,666.66$34,000.00
Laptop: $1,800.00 cost, $200.00 salvage, 3 yearsDouble declining balance$1,200.00$400.00$0.00$1,600.00
Office furniture, no salvage: $12,000.00 cost, $0.00 salvage, 10 yearsStraight-line$1,200.00$1,200.00$1,200.00$12,000.00
Packaging machine: $85,000.00 cost, $10,000.00 salvage, 8 yearsDeclining balance (150%)$15,937.50$12,949.22$9,869.30$75,000.00
Server rack, with the switch: $8,000.00 cost, $0.00 salvage, 5 yearsDouble declining balance (switching to straight-line)$3,200.00$1,920.00$864.00$8,000.00
Printing press: $120,000.00 cost, $15,000.00 salvage, 7 yearsSum-of-the-years’ digits$26,250.00$22,500.00$3,750.00$105,000.00
Delivery truck, by miles driven: $64,000.00 cost, $9,000.00 salvage, 5 yearsUnits of production$14,000.00$13,000.00$5,000.00$55,000.00
Café equipment, cents that do not divide: $15,750.50 cost, $1,250.25 salvage, 7 yearsStraight-line$2,071.47$2,071.47$2,071.46$14,500.25

Depreciation by year for an asset that costs $50,000.00 with a $5,000.00 salvage value and a 5-year life

The $45,000.00 depreciable base spread over 5 years by each method. Declining balance uses a 150% factor; units of production uses the example units. Every column adds up to the same total.
YearStraight-lineDeclining balance (150%)Double declining balanceSum-of-the-years’ digitsUnits of production
1$9,000.00$15,000.00$20,000.00$15,000.00$10,800.00
2$9,000.00$10,500.00$12,000.00$12,000.00$9,900.00
3$9,000.00$7,350.00$7,200.00$9,000.00$9,000.00
4$9,000.00$5,145.00$4,320.00$6,000.00$8,100.00
5$9,000.00$7,005.00$1,480.00$3,000.00$7,200.00

Book value at the end of each year

The same asset: what is left on the books after each year's depreciation, from $50,000.00 down to $5,000.00. Faster methods fall sooner.
YearStraight-lineDeclining balance (150%)Double declining balanceSum-of-the-years’ digitsUnits of production
1$41,000.00$35,000.00$30,000.00$35,000.00$39,200.00
2$32,000.00$24,500.00$18,000.00$23,000.00$29,300.00
3$23,000.00$17,150.00$10,800.00$14,000.00$20,300.00
4$14,000.00$12,005.00$6,480.00$8,000.00$12,200.00
5$5,000.00$5,000.00$5,000.00$5,000.00$5,000.00

Year 1 depreciation by useful life

The same $50,000.00 cost and $5,000.00 salvage value with a different life. Units of production is left out because it depends on the units you enter.
Useful lifeStraight-lineDeclining balance (150%)Double declining balanceSum-of-the-years’ digits
3 years$15,000.00$25,000.00$33,333.33$22,500.00
4 years$11,250.00$18,750.00$25,000.00$18,000.00
5 years$9,000.00$15,000.00$20,000.00$15,000.00
7 years$6,428.58$10,714.29$14,285.71$11,250.00
10 years$4,500.00$7,500.00$10,000.00$8,181.82

Sum of the years’ digits by useful life

Year 1 takes the full life as a fraction of the sum of the digits 1 to n, which is n(n + 1) ÷ 2. The last column applies it to the example's $45,000.00 depreciable base.
Useful lifeSum of the digitsYear 1 fractionYear 1 depreciation
3 years63/6$22,500.00
4 years104/10$18,000.00
5 years155/15$15,000.00
6 years216/21$12,857.14
8 years368/36$10,000.00
10 years5510/55$8,181.82

Double declining balance with and without the switch to straight-line

$10,000.00 asset, no salvage value, 5 years. With the switch on, the schedule changes to straight-line in year 4, the first year it gives a larger charge.
YearWithout the switchWith the switchBook value with the switch
1$4,000.00$4,000.00$6,000.00
2$2,400.00$2,400.00$3,600.00
3$1,440.00$1,440.00$2,160.00
4$864.00$1,080.00$1,080.00
5$1,296.00$1,080.00$0.00

How to calculate depreciation

  1. Enter the cost and salvage value. Type what the asset cost to get it ready for use, and what you expect it to be worth at the end of its life. Leave the salvage value blank for zero.
  2. Enter the useful life. Type the useful life as a whole number of years, from 1 to 50. The first year is treated as a full year.
  3. Pick a method. Choose straight-line, declining balance (150% or 200%), double declining balance, sum-of-the-years’ digits or units of production. For declining balance you can switch to straight-line when it gives a larger charge.
  4. For units of production, add the units. Type the total units the asset is expected to produce, and the units produced each year: one figure to use every year, or one per year.
  5. Read the schedule and the comparison. The result shows the annual depreciation, accumulated depreciation and book value for every year, and a table that compares all five methods. Download the schedule as a CSV or copy the results.

Frequently asked questions

What is depreciation, and what does the salvage value do?
Depreciation spreads the cost of an asset over the years it is used, instead of charging it all in the year it was bought. The salvage value is what you expect to recover at the end, so only the difference, the depreciable base, is written off: $50,000.00 cost minus $5,000.00 salvage is $45,000.00 over 5 years. The book value is the cost minus the depreciation so far, and it never goes below the salvage value.
How do I calculate straight-line depreciation?
Divide the depreciable base by the useful life: (cost − salvage) ÷ years. For an asset that costs $50,000.00 with a $5,000.00 salvage value and a 5-year life that is $45,000.00 ÷ 5 = $9,000.00 a year, a rate of 20% of the base each year. With no salvage value the same asset would depreciate $10,000.00 a year.
What is double declining balance depreciation?
It charges a fixed rate, twice the straight-line rate, on the book value at the start of each year. With a 5-year life the rate is 2 ÷ 5 = 40%, so year 1 is $50,000.00 × 40% = $20,000.00, and later years shrink as the book value falls: $20,000.00, $12,000.00, $7,200.00, $4,320.00, $1,480.00. The salvage value is not in the rate; it only stops the schedule, so the book value ends exactly on $5,000.00.
When should I switch from declining balance to straight-line?
Declining charges get smaller every year, while straight-line over the years that remain stays level. The switch option changes to straight-line in the first year it gives a larger charge. For a $10,000.00 asset with no salvage value over 5 years, double declining balance charges $4,000.00, $2,400.00, $1,440.00, $864.00, $1,296.00 without the switch, and $4,000.00, $2,400.00, $1,440.00, $1,080.00, $1,080.00 with it, switching in year 4. Either way the total is $10,000.00.
What is the difference between 150% and 200% declining balance?
The factor sets the rate: factor ÷ life of the opening book value. For the example, 150% is 30% and charges $15,000.00 in year 1; 200% is 40% and charges $20,000.00. A higher factor moves more of the cost into the early years. 200% declining balance is the same as double declining balance.
How does sum-of-the-years’ digits depreciation work?
Add the digits 1 to the life: for 5 years that is 15. Year 1 takes 5/15 of the depreciable base, year 2 takes 4/15, and so on down to 1/15. For the example that is $15,000.00, $12,000.00, $9,000.00, $6,000.00, $3,000.00. It is front-loaded like declining balance, but it is a fixed schedule that always ends exactly on the salvage value.
When is units-of-production depreciation used?
When wear follows use rather than time: a machine counted in hours or a vehicle in miles. The depreciation per unit is the depreciable base ÷ the total expected units, $0.18 per unit for $45,000.00 over 250,000 units, and each year takes its units times that amount, $10,800.00, $9,900.00, $9,000.00, $8,100.00, $7,200.00 for the example units. If the yearly units add up to more than the total, the extra units are not depreciated; if they fall short, the book value stays above salvage ($27,500.00 in a short-usage case).
Does the calculator handle a partial first year?
No. It treats the asset as in service for the whole of year 1 and for a whole number of years of useful life (1 to 50). If your asset went into service part-way through the year, a common accounting approach is to prorate the first year by the months in service and carry the rest into an extra final year; this tool does not do that, so use the schedule as a starting point and adjust it by hand.
How are cents rounded so the schedule adds up?
Straight-line, sum-of-the-years’ digits and units of production floor each year's exact share to the cent and give the leftover cents to the years with the largest remainders (ties to the earlier year), so every year is within one cent of its exact share. For $1,000.00 over 3 years the charges are $333.34, $333.33, $333.33. Declining balance rounds each year's charge half up to the cent and lets the final year take whatever is left, so the book value always ends exactly on the salvage value.
Which method gives the largest depreciation in year 1?
Among the four methods that depend only on time, double declining balance never charges less in year 1, and for the example it charges the most: $20,000.00, against $15,000.00 for sum-of-the-years’ digits, $15,000.00 for 150% declining balance, $10,800.00 for units of production with the example units and $9,000.00 for straight-line (units of production depends on the units you enter). The total over the whole life is the same $45,000.00 under every method; only the timing of the expense differs.
Is this tax depreciation?
No. It uses the accounting definitions of the five methods and no tax-law tables, rates, conventions or limits. Tax depreciation follows its own rules, which differ by country and change over time, and the book depreciation you report can differ from the amount you deduct. This is an estimate for planning, not tax or accounting advice; ask an accountant or your tax authority before relying on it.
What if the life is one or two years, or the salvage value is zero?
A one-year life charges the whole base in year 1 under every method ($45,000.00 for the example). A two-year life at a 200% rate would be 100% of book value, so the first year takes the whole base above salvage and year 2 is $0.00: $900.00 then $0.00 for a $1,000.00 asset with $100.00 salvage. A zero salvage value is fine: leave it blank.
Can I download the schedule?
Yes. Download CSV saves the schedule shown, year by year, as depreciation-schedule.csv, with the columns Year, Depreciation, Accumulated depreciation and Book value (and Units for units of production). The file is built in your browser, and plain numbers without currency symbols open directly in a spreadsheet.
What is the difference between book value and market value?
Book value is the cost minus accumulated depreciation, an accounting figure: $41,000.00 after year 1 for the example. It is not what the asset would sell for. Market value depends on condition and demand, and can be above or below book value.
What if the yearly units add up to more or less than the total?
The units are counted only up to the expected total. If they go over, the schedule stops depreciating once the total is reached: 5 years of 40,000 units against 100,000 expected charges $18,000.00, $18,000.00, $9,000.00, $0.00, $0.00. If they fall short, the asset is not fully depreciated at the end of the life and the book value stays above salvage; the notes under the result say which case applies.

How it works

Money is kept in whole cents as BigInt and every rate is an exact fraction, so there is no floating-point drift. Straight-line charges (cost − salvage) ÷ life each year. Declining balance charges book value × factor ÷ life each year, rounded half up to the cent and limited to book value minus salvage, with the final year taking the remainder; double declining balance is the same with factor 2, and the optional switch changes to (book value − salvage) ÷ years remaining in the first year that is larger. Sum-of-the-years’ digits charges (life − t + 1) ÷ (life × (life + 1) ÷ 2) of the base in year t, and units of production charges units ÷ expected total units of the base, never beyond the total. For the methods whose yearly shares are known up front the cents are placed by the largest-remainder rule, ties to the earlier year, so the charges add up to the base exactly. The first year is a full year and the life is a whole number of years from 1 to 50. The tool follows accounting definitions only, with no tax-law rules, and gives estimates for planning, not tax or accounting advice.

Sources

  • IFRS Foundation, IAS 16 Property, Plant and Equipment (depreciation methods: straight-line, diminishing balance, units of production)
  • FASB Accounting Standards Codification, Topic 360 Property, Plant, and Equipment
  • Introductory financial-accounting textbooks on depreciation: straight-line, declining balance, sum-of-the-years’ digits and units of production

More: Shopping, tax and businessAll money & costsAll toolsHome & DIY calculators