Playground Mulch Calculator
A play set 10 ft by 8 ft with the usual 6 ft use zone on every side is a surfaced area of 440 sq ft. At 12 in installed depth that is 16.3 cu yd, or 17.93 cu yd with 10% waste: 242 bags of 2 cu ft. Volume = (length + 2 × use zone) × (width + 2 × use zone) × depth ÷ 27. Wood chips need 9 in after settling to protect an 8 ft fall height (CPSC Pub. 325, Table 2: 10 ft), and loose fill compresses about 25%, so 9 in of working depth means installing 12 in.
Figures based on the sources listed belowUpdated How we calculate
Buy 242 bags.
Buy 242 bags
16.30 cu yd + 10% waste = 17.93 cu yd
Or 17.93 cu yd bulk
- Loose fill with waste: 17.93 cu yd
- Surfaced area (equipment plus use zone): 440 sq ft
- Depth after settling (25% allowance, estimate): 9 in, meets the CPSC minimum compressed depth
- Minimum compressed depth, wood chips (CPSC Table 2): 9 in
- Install this deep to still meet it after settling (estimate): 12 in
- Protected fall height at that depth, wood chips (CPSC Table 2): 10 ft, covers your fall height, if the depth is kept up
How this number is calculated
16.30 cu yd + 10% waste = 17.93 cu yd ÷ 0.0741 cu yd per bag = 242 bags
17.9 cu yd — ~100% of a standard truck load
Shopping list
- Playground wood mulch (bagged)
- Engineered wood fiber playground mulch
- Playground border / timber edging
- Landscape fabric (under the fill)
- Garden wheelbarrow
- Landscape rake
Your project
- Equipment length × equipment width: 10 × 8 ft
- Material: Wood chips
- Fall height: 8 ft
- Installed depth: 12 in
- Use zone: 6 ft
- Bag size: 2 cu ft
- Waste: Standard (10%)
Also pick up
- Playground wood mulch (bagged)
- Engineered wood fiber playground mulch
- Playground border / timber edging
- Landscape fabric (under the fill)
- Garden wheelbarrow
- Landscape rake
Reopen this calculation: /calculators/playground-mulch/?s=eyJyb29tIjp7Imxlbmd0aEZ0IjoxMCwid2lkdGhGdCI6OH0sImRlZHVjdGlvbnMiOltdLCJ3YXN0ZVBjdCI6MC4xLCJwYXJhbXMiOnsibWF0ZXJpYWwiOjEsImZhbGxIZWlnaHRGdCI6OCwidGhpY2tuZXNzSW5jaGVzIjoxMiwidXNlWm9uZUZ0Ijo2LCJiYWdDdUZ0IjoyfX0
Show diagram
Saved projects
No saved projects yet.
Surfacing for common play areas
| Equipment | Surfaced area (sq ft) | Cu yd | Cu yd with waste | Bags of 2 cu ft | Bags of 3 cu ft |
|---|---|---|---|---|---|
| 8 × 6 ft | 360 | 13.33 | 14.67 | 198 | 132 |
| 10 × 8 ft | 440 | 16.3 | 17.93 | 242 | 162 |
| 12 × 10 ft | 528 | 19.56 | 21.51 | 291 | 194 |
| 16 × 12 ft | 672 | 24.89 | 27.38 | 370 | 247 |
| 20 × 16 ft | 896 | 33.19 | 36.5 | 493 | 329 |
CPSC Table 2: minimum depth and protected fall height
| Material | Minimum compressed depth | Install this deep | Protected fall height |
|---|---|---|---|
| Wood chips | 9 in | 12 in | 10 ft |
| Wood mulch (non-CCA) | 9 in | 12 in | 7 ft |
| Engineered wood fiber | no row | ask the maker | no row |
| Pea gravel | 9 in | 12 in | 5 ft |
| Sand | 9 in | 12 in | 4 ft |
| Shredded/recycled rubber | 6 in | 8 in | 10 ft |
Fill for a 10 × 8 ft play area by installed depth
| Installed depth | After settling (in) | Cu yd | Cu yd with waste | Bags of 2 cu ft |
|---|---|---|---|---|
| 6 in | 4.5 | 8.15 | 8.96 | 121 |
| 9 in | 6.75 | 12.22 | 13.44 | 182 |
| 12 in | 9 | 16.3 | 17.93 | 242 |
| 15 in | 11.25 | 20.37 | 22.41 | 303 |
Methodology & assumptions
Surfaced area is (equipment length + 2 × use zone) × (equipment width + 2 × use zone), in square feet. Volume is that area × installed depth in inches ÷ 12, in cubic feet; ÷ 27 gives cubic yards. The waste choice (10% or 5%, as on the mulch calculator) is added once, and bags are the total ÷ the bag size, rounded up (a 2 cu ft bag is 2/27 = 0.0741 cu yd). The checks use the CPSC Public Playground Safety Handbook (Pub. 325), Table 2, protective surfacing materials: a minimum compressed depth and the fall height it protects, for wood chips (9 in, 10 ft), wood mulch non-CCA (9 in, 7 ft), pea gravel (9 in, 5 ft), sand (9 in, 4 ft) and shredded or recycled rubber (6 in, 10 ft). The handbook says loose fill compresses at least 25% in use and gives 9 in needing 12 in to start as its example, so the depth after settling is the installed depth × 0.75 and the depth to install is the minimum ÷ 0.75. That 25% is applied to every material here as a planning estimate; rubber and gravel may compress less, so ask the maker. Engineered wood fiber has no row in Table 2: its depth and protected height come from the maker's ASTM F1292 test report for the depth tested, so the page shows the settled depth and points you to that report. The use zone defaults to 6 ft on every side, the usual minimum around stationary equipment; swings need a zone in front and behind of twice the pivot height, and slide exits need more, so enter the larger zone where that applies. This is a quantity and planning tool, not a compliance inspection: the installed system, not a table, decides whether a surface protects a fall, and a certified playground inspector (CPSI) or your local rules can require more. Bag sizes of 0.5, 0.8, 2 and 3 cu ft are typical; check the cu ft printed on yours.
- Public Playground Safety Handbook, Publication No. 325, U.S. Consumer Product Safety Commission (CPSC): minimum compressed loose-fill depths and the fall height each protects (the 2025 edition numbers this Table 2; earlier editions carry the same depths and heights in a differently numbered table), loose-fill compression and use zones
- Playground safety, Massachusetts Department of Public Health guidance based on the CPSC handbook: loose fill compresses at least 25%, so 9 in needs 12 in at installation; shredded rubber 6 in
- Is Your Playground Safe for Kids?, NDSU Extension: surfacing depth and fall heights from the CPSC handbook
- ASTM F1292, Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment (the lab test behind a maker’s fall-height rating)
- ASTM F2075, Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
- Typical retail bag sizes: 0.5 cu ft pea gravel and sand, 0.8 to 1.5 cu ft rubber mulch, 2 cu ft wood mulch (retailer product listings; 3 cu ft is a typical larger bag, check yours)
- Conversion: 1 cubic yard = 27 cubic feet
How to calculate playground mulch
- Measure the equipment. Measure the length and width of the footprint of the play set, including swing and slide exits.
- Add the use zone. Add 6 ft (or more at swings and slide exits) on every side: new length = length + 2 × zone, new width = width + 2 × zone.
- Choose the material and fall height. Pick the surfacing and enter the highest fall height; compare it with CPSC Table 2 or the maker’s ASTM F1292 data.
- Set the installed depth. Install the minimum compressed depth ÷ 0.75: 12 in for a 9 in minimum.
- Work out the volume. Area × depth in feet ÷ 27 is cubic yards; add 5 to 10% waste.
- Convert to bags or a bulk order. Divide by the cu ft printed on the bag; for more than a few cubic yards, order loose fill in bulk.
Worked examples
| Project | Result |
|---|---|
| 10 × 8 ft play set, 6 ft use zone, wood chips 12 in deep, 8 ft fall height, 2 cu ft bags, 10% waste | 242 bags of 2 cu ft (16.3 cu yd, 17.93 cu yd with waste) |
| 8 × 6 ft swing-free climber, 6 ft use zone, 12 in deep, 5% waste | 189 bags of 2 cu ft (13.33 cu yd, 14 cu yd with waste) |
| 16 × 12 ft playground, 6 ft use zone, wood chips 12 in deep, bags of 3 cu ft | 247 bags of 3 cu ft (24.89 cu yd, 27.38 cu yd with waste) |
| 10 × 8 ft play set, pea gravel 12 in deep, bags of 0.5 cu ft (protects falls to 5 ft) | 968 bags of 0.5 cu ft (16.3 cu yd, 17.93 cu yd with waste) |
| 10 × 8 ft play set, shredded rubber 8 in deep, bags of 0.8 cu ft | 404 bags of 0.8 cu ft (10.86 cu yd, 11.95 cu yd with waste) |
Frequently asked questions
- How much playground mulch do I need?
- Add the use zone to every side of the equipment, multiply the two new sides to get the surfaced area, then multiply by the depth in feet and divide by 27 for cubic yards. A 10 × 8 ft set with a 6 ft zone is 22 × 20 = 440 sq ft; at 12 in deep that is 16.3 cu yd, 17.93 cu yd with 10% waste, or 242 bags of 2 cu ft. At that size ordering by the cubic yard is usually far cheaper than bags. For a garden bed, use the mulch calculator.
- How deep should playground mulch be?
- The CPSC handbook (Pub. 325, Table 2) lists a minimum compressed depth of 9 in for wood chips, wood mulch, pea gravel and sand, and 6 in for shredded or recycled rubber. Loose fill compresses at least 25% in use, so to still have 9 in you start with 12 in. This calculator defaults to 12 in installed, which settles to 9 in. Installing only 9 in leaves 6.75 in after settling, below the minimum.
- How far should the surfacing extend around the equipment?
- The use zone is the area under and around equipment where a child may fall or land. The usual minimum for stationary equipment is 6 ft on every side, which is the default here. Swings need a longer zone in front and behind (twice the pivot height) and slide exits need more, so enter a larger zone for those. A 9 ft zone on the 10 × 8 ft example raises the fill to 29.66 cu yd with waste from 17.93.
- What is the protected fall height for each material?
- At the minimum compressed depth, Table 2 gives: wood chips 10 ft, wood mulch (non-CCA) 7 ft, pea gravel 5 ft, sand 4 ft and shredded or recycled rubber 10 ft (at 6 in). The fall height is the height of the highest part a child can fall from, so a deck 9 ft up over wood mulch (7 ft) is not covered, and the page says so: less than your fall height: use a deeper or different surface, or ask the maker for ASTM F1292 data. Pick a better surface, a lower deck or a material with a maker's test report for the height.
- What about engineered wood fiber?
- Engineered wood fiber (EWF) is a manufactured product made to ASTM F2075, and it has no row in CPSC Table 2. The depth and the fall height it protects depend on the product and come from the maker's ASTM F1292 test report, which states the depth tested. Choose engineered wood fiber here to get the volume and the settled depth, then compare that depth with the report. Many makers test at 9 or 12 in; use the figure on the report, not a rule of thumb.
- Why add 25% for compression?
- Loose fill packs down with use, weather and drainage. The handbook says it compresses at least 25%, and its example is that 9 in of working depth needs 12 in installed. This calculator applies that 25% to every material as an estimate: the depth after settling is the installed depth × 0.75. Rubber and gravel may compress less; ask the maker. Then keep checking the depth, especially under swings and at slide exits where fill is pushed away, and top up.
- Is wood mulch from the garden center safe for a playground?
- Only certain kinds. CPSC Table 2 lists wood chips and wood mulch that is not treated with CCA (chromated copper arsenate), so avoid treated or recycled wood of unknown origin. Landscape mulch can include bark, sticks and dyes, and it can protect a lower fall height (wood mulch 7 ft against wood chips 10 ft). If a maker sells it as playground surfacing with an ASTM F1292 report and, for engineered wood fiber, ASTM F2075 certification, that is the product to compare against your fall height.
- How many bags is that for sand, gravel or rubber?
- Pick the bag size printed on the bag. A 10 × 8 ft area with pea gravel 12 in deep and bags of 0.5 cu ft is 968 bags; shredded rubber 8 in deep (in 0.8 cu ft bags) is 404 bags, and rubber is heavy. Gravel and sand are cheaper by the cubic yard, but they protect lower falls (5 ft and 4 ft). A bigger 16 × 12 ft area in 3 cu ft bags needs 247 bags of wood mulch.
- Should I add waste or extra for settling?
- Waste covers uneven ground, spills and edges: use 10% (the standard here) or 5% if the base is flat and the borders are tight. The compression allowance is separate; it is built into the 12 in installed depth, not added to the volume twice. A small 8 × 6 ft set at 12 in with 5% waste is 14 cu yd, 189 bags of 2 cu ft.